I have read most of the threads here as my '08 is now suffering from ABS malfunction. I did the jumper from pin 4 to 13 and am getting this pattern of ABS blinking: 3 - 4, then 3 - 9. Then, the pattern appears to repeat in a loop. I could not find anything that alluded to this particular blinking pattern. I did removed both rear speed sensor connectors, cleaned them thoroughly and reconnected. Back when I installed the 10 mm hub spacers, I had to beat the old studs out, so hoping I didn't damage the sensor. The issue started not long after the spacer install, but went away for a while, then returned. Also, when it's wet out, the issue seems to sometimes go away, which would suggest to me a possible connection that's restored intermittently with moisture present. 🤷
Here is a link to a youtube video:
https://www.youtube.com/watch?v=c1tNLzKA9ks
Thanks very much in advance.
Finally, I have never particularly liked ABS, so I would remove the fuse if there are no harmful side effects to the car and the ABS light stays off. Of course I'd rather fix the issue but if I can't right away, I'd temporarily disable the system if it's okay to do so.
Here is a link to a youtube video:
https://www.youtube.com/watch?v=c1tNLzKA9ks
Thanks very much in advance.
Finally, I have never particularly liked ABS, so I would remove the fuse if there are no harmful side effects to the car and the ABS light stays off. Of course I'd rather fix the issue but if I can't right away, I'd temporarily disable the system if it's okay to do so.