Yarisworld Archive

Toyota Gear Ratio Interchangeability

15 posts · 23,907 views

ArmstrongRacingOriginal postSan Diego · Jun 23, 2018#1
Since I've had several Toyota transmissions apart now and was seeing a pattern, I took a bunch of measurements of the shafts and gears. Turns out all of the C-series gears are cross-compatible! Read more about it on my blog...

http://www.armstrongfamilyblog.com/a...nsaxle-options

Replies 14

atomic_hojiKincardine, ON, Canada · Jun 25, 2018#2
🎉

Who knew you could get a C-series dogbox?!? Assuming you have a spare $6k sitting around. lol

Interesting read, thanks Tom!

-- Adam
tmontagueCaledonia Ont. · Jun 26, 2018#3
Good to know!
CrankyOldManWest Michigan · Jun 26, 2018#4
I did a less detailed investigation several years back when I built my gearbox, but came to the same conclusion for the C5x gears. That's how you get the super overdrive 5th gear and closer 1-2, 2-3 ratios. =)
Bluevitz-rsOshawa, Ontario, Canada · Jun 29, 2018#5
Awesome stuff!!
ArmstrongRacingThread starterSan Diego · Jun 29, 2018#6
Originally Posted by CrankyOldMan ↑
I did a less detailed investigation several years back when I built my gearbox, but came to the same conclusion for the C5x gears. That's how you get the super overdrive 5th gear and closer 1-2, 2-3 ratios. =)
Yes that’s correct! If it wasn’t for you and Bluevitz tearing into these gearboxes before me, I wouldn’t have been so interested to do further research. So thank you!
Bluevitz-rsOshawa, Ontario, Canada · Jun 30, 2018#7
I was the one that built and documented the c160 conversation for the first Gen platform.
Ronnie VBrampton · Jun 30, 2018#8
Is this documentation still around for the first gen? I want to do a 6 speed and a LSD this winter........
3cyltrboOttawa · Jul 1, 2018#9
Originally Posted by CrankyOldMan ↑
That's how you get the super overdrive 5th gear and closer 1-2, 2-3 ratios. =)
I need this in my life! 🤤

someone teach me how.

I hate the huge bog between 1-2 and 2-3, but I love the relatively low hwy rpm in my 2010 CDN model Yaris.

teach me

🙇
Bluevitz-rsOshawa, Ontario, Canada · Jul 1, 2018#10
Originally Posted by Ronnie V ↑
Is this documentation still around for the first gen? I want to do a 6 speed and a LSD this winter........
5 Spd to 6 Spd Conversion DIY
CrankyOldManWest Michigan · Jul 3, 2018#11
Originally Posted by 3cyltrbo ↑
I need this in my life! 🤤

someone teach me how.

I hate the huge bog between 1-2 and 2-3, but I love the relatively low hwy rpm in my 2010 CDN model Yaris.

teach me

🙇
Watch Armstrong's YouTube videos on rebuilding a C60 gearbox. Same basic idea, just has the extra gear on one end. =)
ArmstrongRacingThread starterSan Diego · Jul 8, 2018#12
Originally Posted by Bluevitz-rs ↑
I was the one that built and documented the c160 conversation for the first Gen platform.
OMG my bad dude. I corrected my post to give YOU credit.

Thank you for showing us the way with the 6-speed brother!
ArmstrongRacingThread starterSan Diego · Jul 8, 2018#13
Originally Posted by CrankyOldMan ↑
Watch Armstrong's YouTube videos on rebuilding a C60 gearbox. Same basic idea, just has the extra gear on one end. =)
Thanks Sam! I have made it my purpose to put out a bunch of Toyota gearbox info in writing and video form. I hope to show everyone how to modify these gearboxes or possibly entrust me to build some for the community. So for Trevor and Taylor are the only people to receive gearboxes from me....let’s change that!
swingtechUAE · Oct 6, 2018#14
Hi Guys ,
I am planning to use C150 gearbox 3rd 4th 5th gear set to C56 , are these gears same in size ? Can I use the C56 synchronizer and slider ?

Thanks in advance
RunethecursedSocal · Oct 8, 2018#15
Awesome work, its a shame the C trans wasnt used in conjunction with some of the bigger v6s and i4's

i think those where E coded tranS.