RicStyxOriginal postSouth Africa · May 19, 2018#1I noticed a while ago the newer yaris has a small vortex generator on the inside of the wingmirror base to reduce wind rush. And then i thought about how much noise there was between the wing mirrors when driving at speed.
So I decided I'd make my own and see if they work. I 3D printed them and painted them. Used a good double sided tape to stick them down. Unbelievably they actually work. There is a very noticeable decrease in wind rush. Has anyone else done something similar and also noticed a difference. Granted these are a bit big for the car but they do the job. Picture not included in this copyPicture not included in this copy
Sent from my SM-N910F using Tapatalk
Replies 19
WeeYariGeorgetown, Ontario, Canada · May 19, 2018#2 Originally Posted by
RicStyx ↑ Has anyone else done something similar and also noticed a difference.
I'd have to say you are the first. At least the first to have talked about doing something. Not been too much mention of people 3D printing car parts either. Good for you. 👏
Sent from my Elite_5_5_Octa using Tapatalk
DarkShadowFoxMassachusetts · May 19, 2018#3but do they decrease the wind noise.
RunethecursedSocal · May 19, 2018#4 Originally Posted by
DarkShadowFox ↑ but do they decrease the wind noise.
Cant hear the wind over my exhaust....
cant hear anything over my exhaust..
malibuguyWestminster, MD · May 19, 2018#5 Originally Posted by
Runethecursed ↑ Cant hear the wind over my exhaust....
cant hear anything over my exhaust..
Then you need a better exhaust guy
Alain93Florida · May 19, 2018#6Hi, could you put the file up?
Sent from my SM-T530NU using Tapatalk
KalispelArizona (USA) · May 20, 2018#7That's pretty cool. 👍
mrpjStaffordshire Moorlands, UK · May 20, 2018#8My Mk3 (U.K.), pre facelift, same as the o.p., has a plastic piece factory fitted to the driver's side only and much less obvious. Designed to do the same thing. I'll try to post a picture.
mrpjStaffordshire Moorlands, UK · May 20, 2018#9Picture not included in this copy
Driver's side.
mrpjStaffordshire Moorlands, UK · May 20, 2018#10Picture not included in this copy
Passenger side.
RicStyxThread starterSouth Africa · May 20, 2018#11 Originally Posted by
mrpj ↑ My Mk3 (U.K.), pre facelift, same as the o.p., has a plastic piece factory fitted to the driver's side only and much less obvious. Designed to do the same thing. I'll try to post a picture.
My car has that too, but that is more to counter the difference in wing mirror shape if im not mistaken. Newer models have a small vortex generator on the passenger side to counter the wiper blade air being channelled there. I put 2 on each side, one right by the base and further up the trim. I had to place the ome further up as it was a flatter surface to mount it. But if you look from behind the car the two are directly in the range of the wing mirror, and help disturb the air so it can pass around the problem area.
Sent from my SM-N910F using Tapatalk
dogsridewithUSAnotCA · May 20, 2018#12On each side, I placed a deer whistle ahead of the mirror base...stuck to that black trim piece on the fender.
(There are four on the 91 Corolla--two taped into the empty fog-lite holes in the bumper cover, and one stuck at each end of the cowl trim piece ahead of the mirrors.)
DarkShadowFoxMassachusetts · May 20, 2018#13 Originally Posted by
malibuguy ↑ Then you need a better exhaust guy
sound like an exhaust leak.
mrpjStaffordshire Moorlands, UK · May 21, 2018#14"the difference in wing mirror shape "?
They are both the same shape in spite of being left and right handed.
RicStyxThread starterSouth Africa · May 21, 2018#15Sorry, difference in position, the passenger is slightly more towards the window than the driver to counter for the difference in distance.
Sent from my SM-N910F using Tapatalk
atomic_hojiKincardine, ON, Canada · May 23, 2018#16👍 for a clever solution. Nice work!
-- Adam
scyllaIllinois · May 23, 2018#17justanotherdrunkSilicon Valley · May 23, 2018#18 Originally Posted by
scylla ↑
interesting
i had no idea they help high speed stability
i thought it was only wind noise suppression
thanks for posting
DarkShadowFoxMassachusetts · May 23, 2018#19 Originally Posted by
justanotherdrunk ↑ interesting
i had no idea they help high speed stability
i thought it was only wind noise suppression
thanks for posting
generally toyota designs things that are functional instead of trying to just copy something. thats why their cars are generally so bland and expensive because the design is slippery and functional in the sake of economy.
because of the design of the yaris it pulls a 0.30 c/d (3rd gen till the 2017 redesign) with the 2007 onwards yaris pulling 0.29 C/d yet the third gen is more efficient due to its European design.
also the oem wing helps with stability, as does fitting the side skirts from the factory, and the rear stablizer bar and if you add 16 or 17 inch rims with the lower springs you will add stability as everthing for that car all works together to make it into a normal car.
RicStyxThread starterSouth Africa · May 25, 2018#20So I could hear they where working, today I saw them. Driving on the freeway I had to clear my window so I jetted the water and when it was pushed to the drivers side, I could see the whole stream being pushed over the wing mirror area and along my drivers window. Very interesting to watch.
Sent from my SM-N910F using Tapatalk