Yarisworld Archive

Brake bleed sequence

7 posts · 10,629 views

scyllaOriginal postIllinois · May 14, 2018#1
I will be using the upcoming weekend to do a full brake system flush. Does having a newer Yaris with ABS, stability control, ect change the brake bleed sequence from the usual RR,LR,RF,LF ?

Replies 6

CoryMWhite Rock BC · May 15, 2018#2
It will work fine in the sequence listed.
Cheers.
scyllaThread starterIllinois · May 15, 2018#3
Thank you.
Bluevitz-rsOshawa, Ontario, Canada · May 18, 2018#4
usually just start the furthest away from the master cylinder and work your way closer.
tmontagueCaledonia Ont. · May 18, 2018#5
And if you have a m/t I would recommend bleeding the slave cylinder in between bleeding the r front and l front brakes
zoidberg444Birmingham, UK · May 18, 2018#6
That's how i do it. Clutch slave cylinder last.
bronsinnj · May 19, 2018#7
Originally Posted by tmontague ↑
And if you have a m/t I would recommend bleeding the slave cylinder in between bleeding the r front and l front brakes
Right it’s probably more important to bleed the clutch slave One see year that it is the breaks.

For the experts only! My Honda ST 1300 has linked front and rear brakes via a Rube Goldberg nightmare of break plumbing. There is actually a secondary master cylinder attached to the left front brake caliper that applies the rear brakes when fraction from the rotating desk activate it. There’s like a 20 step leading process in the service manual. Which you are warned must be followed to the letter! But because parts of the system don’t work on my motorcycle I hop skip and jump around the procedure all the time without any problems.

I’m not saying don’t file the Publish sequence, just that if you experiment heal fine it’s not necessary.