Yarisworld Archive

spoiler install

10 posts · 6,813 views

hmsailorOriginal postsan diego · Apr 22, 2018#1
my 2015 4dr LE Hatchback didnt come with a spoiler. if i get a toyota oem spoiler, is drilling required for installation?

1 attachment not included in this copy

Replies 9

WeeYariGeorgetown, Ontario, Canada · Apr 22, 2018#2
The one you have pictured can be held on with 3M tape only.

Sent from my Elite_5_5_Octa using Tapatalk
SirDigbyDenver, Colorado · Apr 22, 2018#3
Originally Posted by WeeYari ↑
The one you have pictured can be held on with 3M tape only.
it can, but if you look at the little covers underneath; there are brackets in there that can be installed by drilling a hole and using included plastic inserts. (i used metal threaded inserts and a bolt) also, i believe there are 2 plastic arrow clips on the spoiler that will have to be removed if you don't drill alignment holes. (if installed from factory)
justanotherdrunkSilicon Valley · Apr 23, 2018#4
heres what mine looks like with the hatch up

probably doesnt help much

Picture not included in this copy

Picture not included in this copy
hmsailorThread startersan diego · Apr 23, 2018#5
Originally Posted by WeeYari ↑
The one you have pictured can be held on with 3M tape only.

Sent from my Elite_5_5_Octa using Tapatalk
even when therebare tabs underneath as seen in the pic? the reason i asked is because the cs rep told me that there is no "special" drilling required.
hmsailorThread startersan diego · Apr 23, 2018#6
Originally Posted by SirDigby ↑
it can, but if you look at the little covers underneath; there are brackets in there that can be installed by drilling a hole and using included plastic inserts. (i used metal threaded inserts and a bolt) also, i believe there are 2 plastic arrow clips on the spoiler that will have to be removed if you don't drill alignment holes. (if installed from factory)
so if i buy a factory oem part, do i need to drill?
WeeYariGeorgetown, Ontario, Canada · Apr 23, 2018#7
Originally Posted by hmsailor ↑
so if i buy a factory oem part, do i need to drill?
Factory installed would be drilled. I'm saying, for that particular spoiler, 3M tape would do the job. It's a scary thing to take a drill to your body panels.

Sent from my Elite_5_5_Octa using Tapatalk
hmsailorThread startersan diego · Apr 23, 2018#8
Originally Posted by WeeYari ↑
Factory installed would be drilled. I'm saying, for that particular spoiler, 3M tape would do the job. It's a scary thing to take a drill to your body panels.

Sent from my Elite_5_5_Octa using Tapatalk
im just a little lost because the spoiler in the pic is a factory toyota oem part.
SirDigbyDenver, Colorado · Apr 23, 2018#9
Originally Posted by hmsailor ↑
so if i buy a factory oem part, do i need to drill?
you don't have to. the covers clip into place. they install the bracket for safety, but the drilling is easy;
-hand tighten nuts on bracket, spoiler side
-hold spoiler in place where it is live forever
-mark holes with marker
-remove spoiler and drill holes
-put tape on the drill bit at 5mm if you are scared of drilling too deep.
-use touch up paint around bare metal

it's super easy to do, but if you use just the tape, make sure to use some really good stuff, like VHB 3m
DarkShadowFoxMassachusetts · May 26, 2018#10
i just got the spoiler off the internet with no guides and a broken LH cover XD how do i install this is there one way it fits on?