Yarisworld Archive

1nz turbo with recipe!

59 posts · 40,040 views · page 2 of 2

Replies continued

speedworxsThread starterEdmonton, Alberta · Jul 25, 2018#51
well... sh**
i talked to the machine shop and the pistons and rods i have are not going to work together. on stock rods the pistons would work fine... but not the rods i am using .
upside, ordered weisco forged pistons, rings, pins and clips for a decent price ($800cdn)
9:1 compression, so i can at least run 15+ lbs, but takes the budget aspect out of my build...
DarkShadowFoxMassachusetts · Aug 6, 2018#52
Originally Posted by speedworxs ↑
well... sh**
i talked to the machine shop and the pistons and rods i have are not going to work together. on stock rods the pistons would work fine... but not the rods i am using .
upside, ordered weisco forged pistons, rings, pins and clips for a decent price ($800cdn)
9:1 compression, so i can at least run 15+ lbs, but takes the budget aspect out of my build...
i think aftermarket rods require a bore. eitherway the stock rods will not hold up past 5psi of boost supercharged or turbo.
atomic_hojiKincardine, ON, Canada · Aug 7, 2018#53
Sorry to hear they didn't match up for ya...

^ I think he means by going with the Wiseco piston setup those will pair with the CXRacing forged rods (vs. Wiseco and stock rods).

Two steps forward and one step back is still going forward - albeit more slowly.. lol. Keep at it man, can't wait to see the results.

-- Adam
speedworxsThread starterEdmonton, Alberta · Aug 11, 2018#54
upside, i can finish porting my cylinder head
reassemble over the fall/winter and then play with the tuning (fic6)
turbo size is my next one- likely t28 size so i don't have terrible lag
speedworxsThread starterEdmonton, Alberta · Nov 16, 2018#55
i was researching parts and stumbled on to this page... x b god ?
not sure if its the same guy (but pretty sure)
some of the engine parts look familiar, and the style he answers posts...
but this page hasn't been active in a while

https://www.facebook.com/One-Nz-Fe-R...3763636773500/

admittedly, i haven't been on here in a while either, :-(

get my block back in a couple weeks, and have decided to replace my head (i had ported some thinking i would have a very high factory pistons. since my pistons are 8.8:1 i'll go back to the factory head so keep some compression ...
and as i was porting one cylinder, f**ked up my valve seat. oops
DarkShadowFoxMassachusetts · Dec 2, 2018#56
Originally Posted by speedworxs ↑
i was researching parts and stumbled on to this page... x b god ?
not sure if its the same guy (but pretty sure)
some of the engine parts look familiar, and the style he answers posts...
but this page hasn't been active in a while

https://www.facebook.com/One-Nz-Fe-R...3763636773500/

admittedly, i haven't been on here in a while either, :-(

get my block back in a couple weeks, and have decided to replace my head (i had ported some thinking i would have a very high factory pistons. since my pistons are 8.8:1 i'll go back to the factory head so keep some compression ...
and as i was porting one cylinder, f**ked up my valve seat. oops
1nz on XB and yaris are similar but kinda different. results may vary.
tmontagueCaledonia Ont. · Dec 2, 2018#57
Originally Posted by speedworxs ↑
i was researching parts and stumbled on to this page... x b god ?
not sure if its the same guy (but pretty sure)
some of the engine parts look familiar, and the style he answers posts...
but this page hasn't been active in a while

https://www.facebook.com/One-Nz-Fe-R...3763636773500/

admittedly, i haven't been on here in a while either, :-(

get my block back in a couple weeks, and have decided to replace my head (i had ported some thinking i would have a very high factory pistons. since my pistons are 8.8:1 i'll go back to the factory head so keep some compression ...
and as i was porting one cylinder, f**ked up my valve seat. oops
Avoid any posts by xb God, he was useful for vaporware and nothing else. Never any real world data or proof, nothing but flashy pics and talk. Essentially great if you are building a fictional show car, but useless for a var that is actually driven
DarkShadowFoxMassachusetts · Dec 5, 2018#58
Originally Posted by tmontague ↑
Avoid any posts by xb God, he was useful for vaporware and nothing else. Never any real world data or proof, nothing but flashy pics and talk. Essentially great if you are building a fictional show car, but useless for a var that is actually driven
check out my turbo i bolted in but didnt bolt up guys.
speedworxsThread starterEdmonton, Alberta · Jun 27, 2019#59
well,...
i'm not a poser like xb, but i got laid off in december. then had to put the 1nz plans to the back of the list. but upside, got a new job. making money again - hurrah
so, will start moving on that again.
just so i don't look like i disappeared... turns out life is an expensive hobby (especially when unemployed 😆)