Yarisworld Archive

Honda Manifold

9 posts · 9,041 views

speedworxsOriginal postEdmonton, Alberta · Apr 8, 2018#1
so i had some industrious thinking today... and went to the local wrecking yard.
so i took the exhaust manifold off of a 99 civic
and compared it to a 1nz (my 03 echo)
i was gambling that the 1.5L displacement would translate to a similar bore spacing and put the intake and exhaust ports in a close distance

not sure which version of the D series engine i took but i can always go back and recheck.
BUT
the exhaust ports were a virtual match. the oval shape honda exhaust ports matched excellent.
meaning, you can get a turbo manifold designed for a honda, cut the flange off and put a 1nz flange on , and for way less effort, an inexpensive mass produced part
so this style
Picture not included in this copy

just cut off and put this on
Picture not included in this copy

Replies 8

RunethecursedSocal · Apr 8, 2018#2
Better Idea, buy manifold, and weld in material to redrill holes using a gasket as a template. belt sand the surface down to flat and have at ye

welding around a flange is insanely hard in comparison,
speedworxsThread starterEdmonton, Alberta · Apr 8, 2018#3
but the port shape will have to change a little bit.
i thought it would be better/cheaper than getting a brand new manifold designed and fabricated
RunethecursedSocal · Apr 8, 2018#4
port shape on the way out of the exhaust side of the head isnt as important as port shape of the intake going in.
DliveranceElma Washington · Apr 9, 2018#5
I was thinking about something like this but when I looked, the k series manifolds look to be a better fit
speedworxsThread starterEdmonton, Alberta · Apr 10, 2018#6
which is odd, since the k series is a much bigger engine
- i wouldn't think the bore spacing would match as well.
DliveranceElma Washington · Apr 13, 2018#7
hmm. I wonder if the Honda Fit would be a better fit.
BennyLavaTexas · Apr 13, 2018#8
Is the exhaust all that restricted on a yaris? And if so, is the manifold that big of a bottleneck?
SirDigbyDenver, Colorado · Apr 16, 2018#9
Originally Posted by BennyLava ↑
Is the exhaust all that restricted on a yaris? And if so, is the manifold that big of a bottleneck?
i think these guys are talking about making a manifold for a turbo charged set-up. there are plenty of non-turbo manifolds available.
the manifold is slightly restrictive, like most stock manifolds.