Yarisworld Archive

Slightly Low Coolant, Should I Flush or Top It Off

9 posts · 4,582 views

vaironlOriginal post-- · Mar 21, 2018#1
Hello,

Recently my friend noticed the coolant in my Yaris was a little bit below the line LOW line, but I only have 70k miles so it is not due for a replacement. I want to fill it back to the appropriate level, but am not sure of what type/brand of coolant was put in previously. Any idea of what are the best steps I can take here to avoid any issues? I would have no problem flushing the system, but ideally would like to avoid it.

Replies 8

komichalCZ · Mar 22, 2018#2
Buy yourself a mixture with water 1:1 of G12+ (pink one) and pour it in. The brand is not that important.
For a full flush the guys here would recommend to go only with OEM Toyota coolant but if you just need to add a bit then you can use anything. I did a full flush recently and used Sheron as the Toyota stuff costs a fortune while there is no measurable difference.
vaironlThread starter-- · Mar 22, 2018#3
Originally Posted by komichal ↑
Buy yourself a mixture with water 1:1 of G12+ (pink one) and pour it in. The brand is not that important.
For a full flush the guys here would recommend to go only with OEM Toyota coolant but if you just need to add a bit then you can use anything. I did a full flush recently and used Sheron as the Toyota stuff costs a fortune while there is no measurable difference.
Thank you for the advice, gonna get it ASAP! I did notice the Toyota coolant will cost a pretty penny!
tmontagueCaledonia Ont. · Mar 22, 2018#4
Keep in mind the cooling system in the yaris is not a sealed system so losses due to evaporation do happen. Every year you'll probably find you are down a few ounces
ex-x-fireSheboygan Falls, Wi. · Mar 22, 2018#5
Originally Posted by vaironl ↑
Hello,

Recently my friend noticed the coolant in my Yaris was a little bit below the line LOW line, but I only have 70k miles so it is not due for a replacement. I want to fill it back to the appropriate level, but am not sure of what type/brand of coolant was put in previously. Any idea of what are the best steps I can take here to avoid any issues? I would have no problem flushing the system, but ideally would like to avoid it.
Check your water pump, sometimes they leak and then stop. You'll likely see a dry crusty stain, red colored.
vaironlThread starter-- · Mar 22, 2018#6
Originally Posted by tmontague ↑
Keep in mind the cooling system in the yaris is not a sealed system so losses due to evaporation do happen. Every year you'll probably find you are down a few ounces
Got it, I'll make sure to get the reservoir as close as possible to the full line.

Originally Posted by ex-x-fire ↑
Check your water pump, sometimes they leak and then stop. You'll likely see a dry crusty stain, red colored.
Will be checking for this, thank you for pointing it out. Hopefully, it is just as tmontague said and it was due to evaporation.
komichalCZ · Mar 22, 2018#7
I remember once quite a gulp of coolant "disappeared" from my coolant reservoir in one week or so. I poured in some distilled water and it has not moved a bit since then. It is been on the same level over a year already. Who knows why car spitted that out before.
SirDigbyDenver, Colorado · Mar 23, 2018#8
^^^yes. top off with distilled water. it's like $0.60 a gallon.
KazimodoMontreal subburb · May 23, 2018#9
Just make sure what you put in there guys ,
mixing OAT coolant with HOAT coolant makes a reaction turning your coolant to a Jello like substance ==> big troubles getting that removed from Inside engine .
head (when mix  HAOT + AOT).jpgwaterpump ( when MIX haot + aot).jpg