Yarisworld Archive

Having brake issues

16 posts · 10,481 views

Yaris709Original postNewfoundland · Mar 15, 2018#1
Having issues with the brake pressure in my 2007 yaris sedan. When I first start up the car I have no brake pressure and can't stop. Once i get going down the road a bit the brakes work perfect again. Seems to only happen for a few seconds after start up and driving. Anyone have an idea what could my problem be?

Replies 15

ex-x-fireSheboygan Falls, Wi. · Mar 15, 2018#2
So, you don't have any power assist?
Yaris709Thread starterNewfoundland · Mar 15, 2018#3
Nope I loose break pressure (and car can't stop) for a few seconds on a cold start of the car. After driving for a few seconds it seems fine again
ex-x-fireSheboygan Falls, Wi. · Mar 16, 2018#4
I guess you can look for wet spots anywhere. My guess would be the master cylinder is bypassing.
IllusionXBrossard, QC · Mar 16, 2018#5
Is the brake pedal hard, or you push and it goes to the floor?

Sent from my SM-G930W8 using Tapatalk
IllusionXBrossard, QC · Mar 16, 2018#6
Originally Posted by Acura_reaper ↑
I just rear endend a focus yesterday cuz my brakes went to the floor. Broke my grille but did nothing to their car go figure.

Sent from my VS996 using Tapatalk
Then your master cylinder must have issue IMO.

Sent from my SM-G930W8 using Tapatalk
IllusionXBrossard, QC · Mar 16, 2018#7
Pull hand brake if you are not getting brake response...

IMO you shouldn't have driven your car when you knew you had brake problems.

Brake fluid should be changed after a while AFAIK.

Sent from my SM-G930W8 using Tapatalk
IllusionXBrossard, QC · Mar 16, 2018#8
No you don't, or you find another way to get to work and not put others or yourself in danger.

Sent from my SM-G930W8 using Tapatalk
IllusionXBrossard, QC · Mar 16, 2018#9
Originally Posted by Acura_reaper ↑
U dont know my situation so stop trying to tell me what i should do and help me fix my brakes or shut up

Sent from my VS996 using Tapatalk
Garage. Check master cylinder. Told you already.

What if you just FUCKING DIED while going to work with a broken car? Hope you kill someone with your car.



Sent from my SM-G930W8 using Tapatalk
Yaris709Thread starterNewfoundland · Mar 16, 2018#10
Alright guys enough with the arguing haha I'm just wondering why my cars brake pressure was temporarily lost for a few seconds. On a side note it was fine today never had any trouble at all. This is a weird problem
dogsridewithUSAnotCA · Mar 17, 2018#11
Originally Posted by IllusionX ↑
Is the brake pedal hard, or you push and it goes to the floor?

Sent from my SM-G930W8 using Tapatalk
OP will get better advice here if e answers this question. (A pedal on the floor or a high pedal w/ failed boost will both reduce "brake pressure," but would likely have different causes.)
IllusionXBrossard, QC · Mar 17, 2018#12
Originally Posted by dogsridewith ↑
OP will get better advice here if e answers this question. (A pedal on the floor or a high pedal w/ failed boost will both reduce "brake pressure," but would likely have different causes.)
High brake is likely failed vacuum, but a pedal to the floor is either air in system or master cylinder.

Now, op already checked for brake line leak, and bled. Provided he did good/proper maintenance, all I can think of is the master cylinder having issues.

Eitherway, OP said his pedal went to the floor, I did suggest it was the master cylinder, stop driving the car as it is very dangerous.But well, looks like I know nothing, so I'll just let OP drive his car around trying to kill some innocent people



Sent from my SM-G930W8 using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Mar 17, 2018#13
Please note that there are two individuals with brake issues contributing to this thread.

The OP did not make the statements you are referencing.

Originally Posted by IllusionX ↑
Now, op already checked for brake line leak, and bled. Provided he did good/proper maintenance, all I can think of is the master cylinder having issues.
IllusionXBrossard, QC · Mar 17, 2018#14
Originally Posted by WeeYari ↑
Please note that there are two individuals with brake issues contributing to this thread.

The OP did not make the statements you are referencing.
Nice thread hi-jack. SMH

Sent from my SM-G930W8 using Tapatalk
ex-x-fireSheboygan Falls, Wi. · Mar 17, 2018#15
If the pedal goes to the floor, do this, pinch off all 4 brakes hoses, is the pedal still low? If yes then its most likely the m/c. If not, then release each brake hose until the pedal drops. That will tell you which part of the car is causing issues. You'll need a helper to hold the pedal down.
tmontagueCaledonia Ont. · Mar 17, 2018#16
Wee is correct. The OP - Yaris709 had the original issue

Acura_reaper hijacked the thread with a random comment about getting into a crash when his brakes hit the floor. He also never claimed to have previous knowledge of his brakes failing which the OP did.

Lets keep the thread for the OP and limit confusion