SirDigbyOriginal postDenver, Colorado · Mar 8, 2018#1i just got another tachometer. this one is too nice to build a pod on, so i'm going to build a gauge cluster and install it properly.
Picture not included in this copy
Replies 8
RunethecursedSocal · Mar 9, 2018#2Doesn't go high enough... #aboutthatrotarylife
ern-dizCA all day · Mar 9, 2018#3I wouldn't mind having a tach again.
Originally Posted by
Runethecursed ↑ Doesn't go high enough... #aboutthatrotarylife
Ha.
SirDigbyThread starterDenver, Colorado · Mar 10, 2018#4 Originally Posted by
Runethecursed ↑ Doesn't go high enough... #aboutthatrotarylife
rev limiter is at like 6500...
it has a 1NZ-FE. a 20b would be nice, but correcting mazda's mistakes are expensive. the car modification would be expensive. maybe someday....
DliveranceElma Washington · Apr 10, 2018#5Where are you planning to put the gauge cluster? I’ve been thinking about putting one above my steering wheel in the removable compartment on mine. It would be nice to have a bezel for it though
SirDigbyThread starterDenver, Colorado · Apr 10, 2018#6right now i built a pod on the back of a little cheap-o and mounted it in the glove box.
Picture not included in this copy
i think i'm going to get a thick piece of plexiglass and bend it into an "L" shape and frame in some side pieces. then i'm going to cut a square out of the glove box to mount. behind the door, i am going to mount a power strip and a ground strip to make powering gauges and other things up there easier.
RunethecursedSocal · Apr 12, 2018#7I made a backing plate for mine and removed teh glovebox in full. i need to spend more time on it as i want to redesign how it looks and works,
B.B._07YYC · Apr 13, 2018#8I think a much cleaner solution is to get a OE Canadian instrument cluster which includes a tachometer. The only drawback is the speedometer is in km/hr with miles/hr shown below in a smaller font.
SirDigbyThread starterDenver, Colorado · Apr 16, 2018#9yeah, but the Canadian one still does not have a water or oil gauge. the main concern is water temp. i did not want to goop filler on the nice water gauge ether, so the best option is to build a cluster onto the glove box. plus, it's way more fun to build stuff than to plug stuff in...