Can anyone assist in locating the PCV VALVE for my Toyota yarris 1.0 2008 . A image of where it is would be appreciated.
PCV VALVE ON 1.0 TOYOTA YARIS 2008
8 posts · 9,263 views
Replies 7
That's an NZ not a KR engine.Originally Posted by castles ↑
I can't cut from this doc. But if you follow this link there is a diagram on page 89 showing the location on a 1KR-FE:
http://webpages.charter.net/scott.mc...%20Control.pdf
http://webpages.charter.net/scott.mc...%20Control.pdf
Back of the engine behind where the oil cap is there is a hose that goes in. Take the hose off. It goes into the PCV valve. I take mine off and squirt some carb cleaner through it every time I change the oil.
I don't believe you need to clean it every oil change, once every 6 months should be sufficient IMO. It's just a block valve that works with positive pressure, if it raddles when you shake it than it's good to go.
Hello. Where did you bought the pcv valve. Any link please?Originally Posted by zoidberg444 ↑Back of the engine behind where the oil cap is there is a hose that goes in. Take the hose off. It goes into the PCV valve. I take mine off and squirt some carb cleaner through it every time I change the oil.
Sent from my MI MAX 2 using Tapatalk
How often do you change oil? I do it every 8,000 km (approx. 6 months) and I think I am a freak. Your post suggests that you change oil even more often...?Originally Posted by esse10 ↑I don't believe you need to clean it every oil change, once every 6 months should be sufficient IMO. It's just a block valve that works with positive pressure, if it raddles when you shake it than it's good to go.