As a lot of third gen owners know, there aren't nearly as many aftermarket accessories out there as there are for the 07-11 guys. So when I couldn't find a spoiler to fit my 2012 Hatchback, I wasn't too shocked. But would a second gen wing work straight out of the box? The answer is no lol. But its not hard to make it work
This is the wing I ordered/received. Found it on ebay for around 40 bucks
Picture not included in this copy
Its made out of plastic. If you get a fiberglass one you wont be able to manipulate it with heat, but you can make it work if you know how to work fiberglass
Picture not included in this copy
Picture not included in this copy
Here are some finished pictures. I sprayed the whole car in Bright White Raptor Liner. Not everyones cup of tea, but
Out of the box, I quickly found out that not only did any of the curves match, but the washer fluid nozzle would be in the way
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Took a heat gun and heated the middle and flattened it out a bit until it would sit flush with the lid. Then I marked where the nozzle would sit and went to town on it with a heat gun and metal pipe. I overdid it with the heat and it came out a bit wrinkled...but since on the other side and I am going to raptor line the whole car i wasn't too worried about it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
And the way it sits no. It will cover up half of the third brake light, but meh. Once i line the whole car I will post more pics of the finished product
Picture not included in this copy
Finally some finished pictures. Sprayed the whole car in Bright White Raptor Liner. Probably not what most people would do...but 🤷 lol
Picture not included in this copy
Picture not included in this copy
This is the wing I ordered/received. Found it on ebay for around 40 bucks
Picture not included in this copy
Its made out of plastic. If you get a fiberglass one you wont be able to manipulate it with heat, but you can make it work if you know how to work fiberglass
Picture not included in this copy
Picture not included in this copy
Here are some finished pictures. I sprayed the whole car in Bright White Raptor Liner. Not everyones cup of tea, but
Out of the box, I quickly found out that not only did any of the curves match, but the washer fluid nozzle would be in the way
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Took a heat gun and heated the middle and flattened it out a bit until it would sit flush with the lid. Then I marked where the nozzle would sit and went to town on it with a heat gun and metal pipe. I overdid it with the heat and it came out a bit wrinkled...but since on the other side and I am going to raptor line the whole car i wasn't too worried about it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
And the way it sits no. It will cover up half of the third brake light, but meh. Once i line the whole car I will post more pics of the finished product
Picture not included in this copy
Finally some finished pictures. Sprayed the whole car in Bright White Raptor Liner. Probably not what most people would do...but 🤷 lol
Picture not included in this copy
Picture not included in this copy