David COriginal postMontreal · Feb 24, 2018#1First time making a custom shifter knob.
First time drilling a 250kcmil XLPE aluminum conductor and tapping threads in it.
First time using 3/4 PEX tubing as bushing.
Not the first time doing basement machine work out of scrap supplies.
Now both my rides have matching grips.
What's do you think ?
Picture lost · uploads.tapatalk-cdn.com Picture lost · uploads.tapatalk-cdn.com Picture lost · uploads.tapatalk-cdn.com 
Replies 5
ern-dizCA all day · Feb 25, 2018#2I like the bike grip shift knob look. There was a guy that posted about making custom ones a while back and I sub'd to the thread in case I ever got bored of my little black aluminum knob. From the pics, looks like you did a great job.
We just re-plumbed our house with PEX, so I knew what you meant right away but was expecting blue or red, not white lol.
David CThread starterMontreal · Feb 25, 2018#3We have a 5 apartment building and redid the main water line last winter. PEX 1" from the 1" copper pipe entering the basement. 40' later it splits into a 3/4" PEX to feed a manifold that goes to our first floor cold water and the 5 water heater, all 1/2" outlets. The other split goes vertical 1" to feed the apartments upstairs. We bought 10' bundles for the 1" and 3/4", and since they were getting insulated, didn't bothered hunting down colors.
zoidberg444Birmingham, UK · Feb 25, 2018#4That's kind of cool.
Although it kind of gives me indigestion seeing an auto in a Yaris...
David CThread starterMontreal · Feb 25, 2018#5I saw his post, but then decided to try my luck with whatever I had on hand
David CThread starterMontreal · Feb 25, 2018#6 Originally Posted by
zoidberg444 ↑ That's kind of cool.
Although it kind of gives me indigestion seeing an auto in a Yaris...
Just imagine it's a 4 spd manual with driver assist.