Yarisworld Archive

New Tach,

29 posts · 7,231 views

rwseattleOriginal postSeattle, WA · Jul 2, 2007#1
New autometer tach RPM

3 attachments not included in this copy

Replies 28

nqdBoston, MA · Jul 2, 2007#2
with it mounted there can you lift up the storage comaprtment?
ChinoCharlesOH · Jul 2, 2007#3
Sexy. More pictures please.
rwseattleThread starterSeattle, WA · Jul 2, 2007#4
I'm no longer able to use the storage compartment. I didn't really use the space. I will post more piz later.
nqdBoston, MA · Jul 2, 2007#5
can we see what it looks like from the outside of the car? thanks .....i moight just do this with mine
JerkrattFair Lawn, NJ · Jul 2, 2007#6
hope u dont get pulled over and get your car searched... they will rip that open lol.. or atleast around here they will. but then you can make the town pay for it :) btw: looks really fin good. im goign to get a tach eventually.. when i get a manual yaris. after my wife gets this one
rwseattleThread starterSeattle, WA · Jul 2, 2007#7
I'm not too worried about getting searched. The cops probably don't even know that behind the tach is a storage compartment. Anyhow, I like the look and prefer the larger tach for visibility. Cheers.
solarVitzSan Diego · Jul 4, 2007#8
thats awesome. can you do a write up on how to install an after market tachometer? me and my best friend are buying our yaris liftback this week and we want to put a tachometer as soon as we get our cars. thanks.
regimeNew London, CT · Jul 4, 2007#9
why not just swap out the stock gauge cluster for the one from a sedan with a tach already in it??

just questioning for to discuss the difficulties behind it, not to say you didnt do a good job with a clean after market install.
rwseattleThread starterSeattle, WA · Jul 4, 2007#10
Cost, the aftermarket gauge is a whole lot cheaper than any Toyoto gauge. My set up, It's kinda like the Mini cooper style. Sporty. I DIY soon. Thx.
bladesmith6PA · Jul 4, 2007#11
Can't swap gauges from a sedan, there are too many variations of the harness according to Toyota. Believe me the question has been asked many times by many people and nobody has had any luck with an alternative yet short of an aftermarket tach, bums me out too. I still have to decide how I'm going to mold in my tach, I have a prototype but did quite like how it fit.
Meteorite ManTaunton, Mass · Jul 4, 2007#12
Need to get one from an old Pontiac GTO/Judge. They mounted outside the car on the hood and had the same half-oval shape our dash/speedo housing has. I've seen them in a JC Whitney Mag not to long ago but not sure if it's able to be wired into the electronics. Would look good as a "bump" on the hood.

Someone will figure it out.

Chuck
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jul 7, 2007#13
^^^ that idea will not look good at all, RICER.......
JerkrattFair Lawn, NJ · Jul 7, 2007#14
lol come on man its everyones style he likes it thats all that matters
CompanyXPaladinSoCal · Jul 20, 2007#15
I like it. Thats a clean looking install. I installed mine on top of the drivers side vent, and it allows me to still use the storage compartment; but to each his own. Good job, man! Keep it up.
njyarisNORTHERN NEW JERSEY · Jul 21, 2007#16
i love the tach .. but personally i dont want to loose the storage compartment
REMIrondequoit, NY · Jul 23, 2007#17
I mounted a 5" tach in the same place, but mine is much more slender (Faze, not Autometer) so I can still open the door behind it. I liked the look of the Autometer tach, but the Faze fit better. I'll post pictures if anyone is interested.
rwseattleThread starterSeattle, WA · Jul 24, 2007#18
REM post pic please.
KioshiFremont, CA · Jul 24, 2007#19
When's the DIY gonna be posted up rwseattle? Waiting for it this whole time haha. Desperate need of an easy-to-install tach ^_^
REMIrondequoit, NY · Jul 24, 2007#20
Okay, I posted a few pictures in my garage. You can see how slim the tach is and I even snapped a picture with my storage box door open.
Meteorite ManTaunton, Mass · Jul 24, 2007#21
Thanks for the pics. That helps me out alot. I like the placement. Are there 4 wires? Looks pretty simple. Did you pull that steering column to mount the tach with screws/bolts?

Again, thanks for the help.


Chuck
rwseattleThread starterSeattle, WA · Jul 24, 2007#22
First remove:

2 screws in the front of the steering wheel. Turn the steering wheel and you will see the screws. (DO NOT REMOVE THE HORN COVER, TURN THE WHEEL AND YOU WILL FIND THEM)

You will find 3 screws at the bottom of the steering column that hold the plastic cover. After removing the 3 screws you can pull the plastic top/bottom part of the steering column and install you new tach. You can also pull you wiring nicely behind the dashboard.

4 wires,
1. Black, ground wire
2. Red main power wire
3. White tach light wire
4. Green RPM signal wire

1. I attached the ground inside the driver side kick panel.
2 and 3. I attached the red power/white light wire to the primary stereo power line
4. I attached the green RPM signal wire in to the ECU wiring block under the driver side dashboard. Its the most left wire in the connector block. This is the connector block that the ScangaugeII guys use.

It's pretty easy. You could decide to attached the white light wire to the dimmer on the driver side but, I didn't really mind having the light on in the tach 24/7.

Hopefully that helps.
RwSeattle.
rwseattleThread starterSeattle, WA · Jul 24, 2007#23
REM nice tach. Looks great.
REMIrondequoit, NY · Jul 24, 2007#24
rwseattle,
Thanks, I actually like the way yours looks better, but I use my storage box, so I was unable to use the Autometer tach.
cm07yarisAppleton, WI · Jul 31, 2007#25
What is the exact red line for a 2007 Liftback, Manual Transmission?
REMIrondequoit, NY · Jul 31, 2007#26
I'm pretty sure it is 6,500. Someone correct me if I am wrong.
DorytheYarisJersey · Aug 7, 2007#27
I like it. It reminds me of the Tachometer in a MINI Cooper.
cdmyarisCalifornia, SoCal · Aug 7, 2007#28
Originally Posted by REM ↑
I'm pretty sure it is 6,500. Someone correct me if I am wrong.
ur right. Its at 6500. Btw, awesome idea for your tach. 🎉
decesarebrianFrederick MD · Aug 13, 2007#29
So I have had the car for 4 days and decided to install a tach. Well me and my friend did everything in about ten minutes and then spent a half an hour pulling out a fuse! Haha Im gonna buy some real small pullers! The tach looks great and is 100% accurate though so I'm a happy camper. I didn't realize gears12 and 3 were so big and 4-5 so small. Sweet.