seaneleOriginal postSoCal · Jul 2, 2007#1first of all,
i already pick Tanabe DF210 for the suspension, will get it this Thursday and hopefully installed same day.
Then,
the rims/tires..I will buy them the next day.
now the question is,
which set below that will rub,
17x7 rims and 205-40-17..?
or
17x7 rims and 215-40-17..?
or
16x8, 6x7 rims and 215-40-16..?
basically,
i want to lower the car and put a nice 16 or 17 rims with wider tires. (215 maybe?)
my wife approved the funds...so it's my best chance to dress up the baby 😁
please help,....really need this info.
Replies 9
VanderkittenBerkeley, CA · Jul 2, 2007#2215's on 17's may rub after the springs settle. It shouldn't be bad, probably on the roughest of roads or hardest cornering on the plastic wheel well liner. Look for a 38mm offset in the 17s, I believe that's the magic number.
I personally like 17's... here are our cars with MB Weapon 17's with 205/45/17's and Megan Racing Coilovers.
2 attachments not included in this copy
slvryarisIndiana · Jul 2, 2007#3I had 215/40/17 on my sedan and it rubbed in the rear, but I dont know how the harchbacks are. The rims were 17x7 with a 40 mm offset.
hasher22Australia Sydney · Jul 2, 2007#4lets just say this
Mine has Tanabe DF springs + 17" wheels with 205/40/17 tyres.....perfect in my end
YamilRSan Diego, CA · Jul 2, 2007#5 Originally Posted by
hasher22 ↑ lets just say this
Mine has Tanabe DF springs + 17" wheels with 205/40/17 tyres.....perfect in my end
Same here
RazrChiangmai, Thailand · Jul 2, 2007#6According to the Thai Yaris freaks. 215/40R17's won't rub at all with lowered suspension. I have 215/45R17's and they have rubbed twice - both times in the front only, at speed (140+ KM/hr), on hella bumps, and with a 2" drop courtesy of a few hundred kilos of load. Only minor rubs in any case, so I'll be using the same fitment when I go low.
Note however that every brand of tire is slightly different - some 215/45R17's won't rub, others might have serious problems. I'm running Dunlop SP 9000 Sport for reference.
kimonaHuntington Bch, CA · Jul 2, 2007#7RIMS: You can run 16x7's or 17x7's. I wouldn't advise rims any wider for most Yaris applications.
OFFSET: The Yaris is quite sensitive to offset. I recommend no less than 40mm to avoid problems; however 42-45mm would be better.
TIRES: Don't run wider than 205 rubber to avoid rubbing problems.
eTiMaGoBangkok, Thailand · Jul 2, 2007#8I'm running 215 tires, suspension lowered roughly 1.5", and I get infrequent rubbing (only front outside wheel when braking into a curve, and hitting a bump or other uneven surface).
For you, I'd recommend sticking with the 215/40s, they seem the best combination for a 17" wheel.
seaneleThread starterSoCal · Jul 2, 2007#9 Originally Posted by
Vanderkitten ↑ 215's on 17's may rub after the springs settle. It shouldn't be bad, probably on the roughest of roads or hardest cornering on the plastic wheel well liner. Look for a 38mm offset in the 17s, I believe that's the magic number.
I personally like 17's... here are our cars with MB Weapon 17's with 205/45/17's and Megan Racing Coilovers.
demm...thats nice.
seaneleThread starterSoCal · Jul 2, 2007#10 Originally Posted by
hasher22 ↑ lets just say this
Mine has Tanabe DF springs + 17" wheels with 205/40/17 tyres.....perfect in my end
no rubbing??