Anyone know of any good touch screen stereo's that will fit in the Yaris Sedan and look as clean as the stock setup?
Clean Looking Touch Screen?
16 posts · 7,621 views
Replies 15
Alphine and Pioneer double din will imo.
-- Blen
-- Blen
I have a Jensen VM9021TS in my car. Very good unit. Touch screen, tv tuner, and a whole lot of features.
Check out this link http://www.audiovox.com/webapp/wcs/s...5218&langId=-1
Check out this link http://www.audiovox.com/webapp/wcs/s...5218&langId=-1
No aftermarket unit will look as good as the stock unit.Originally Posted by OgDogg ↑Anyone know of any good touch screen stereo's that will fit in the Yaris Sedan and look as clean as the stock setup?
The aftermarket units are not as wide as the stock one.
You need to get a kit or do some custom work.
I have the JVC KW-AVX800 which is nice for the price, has a good picture and plenty of features.
I have the Alpine IVA-W205 in my car and it looks Fantastic!! 😉
2 attachments not included in this copy
That is sick... how much?
How much fab work did it take, and what harness is everyone using. Back a year qago when I was going to put one in they didnt have a harness for it yet you had to use an Echo harness.
there should be no fabric work
just two small plastic parts ti fill the size
I have the same look in my car and I have clarion MAX667VD
just two small plastic parts ti fill the size
I have the same look in my car and I have clarion MAX667VD
ALPINE. 🙇
I used a Metra Kit: 95-8202
As far as wiring harness, i didn't use the factory Power Wires because they looked so puny. But otherwise, i just used a bunch of piggy back connectors and attached it to the factory harness that way. If y'all want, i can make a DIY for this type of install. BTW, a Double DIN radio should use the factory mounting brackets, the metra kit is only for the face brackets on each side.
As far as wiring harness, i didn't use the factory Power Wires because they looked so puny. But otherwise, i just used a bunch of piggy back connectors and attached it to the factory harness that way. If y'all want, i can make a DIY for this type of install. BTW, a Double DIN radio should use the factory mounting brackets, the metra kit is only for the face brackets on each side.
Umm . . . The Deck was 899.00 and the Metra kit (95-8202) was 19.99 from Circuit City.Originally Posted by Black Yaris ↑That is sick... how much?
Thats 1/10 of my cars original value....now thats sick!Originally Posted by SiliconRane ↑Umm . . . The Deck was 899.00 and the Metra kit (95-8202) was 19.99 from Circuit City.
get that Alpine IVA-W205
it's sick - I'm planning to get that as well -
it's sick - I'm planning to get that as well -
Sick you say . . . This is sick:Originally Posted by redyaris ↑Thats 1/10 of my cars original value....now thats sick!
IVA-2005 Head Unit - 899.00
Sirius Direct Connect Setup for Alpine - 149.99
4X Alpine Type-R Speakers for the Doors - 300.00
10' Alpine Type-R Sub - 249.99 (About a year ago when new)
400 Watt Alpine Amp - 199.99
1 Farad Cap - 99.99
Custom Wiring - +/- 75.00
Entire Car Spray in Dynomatt and PolyFill - 99.99 (Parts)
Custom Tuned Enclosure - 99.99
Labor - (If i had someone else do it) 400.00+
Total: $2568.00
Sound Quality - Unparalleled👍
Does anyone have pictures of an aftermarket deck in a sedan? I have yet to find one using the search...
I'm getting the Kenwood DNX 7100 (i think that is the model number) and I got the Metra Kit: 95-8202 and the dash bezel for the stereo the part #55405-52640 and cost is $53.65 + $7.75 shipping at http://www.trdsparks.com/
attached is a picture of the dash bezel for the stereo:
attached is a picture of the dash bezel for the stereo:
1 attachment not included in this copy