Sway84Original postToronto Ontario Canada · Jun 21, 2007#1i lost one of mine trying to DIY the Center Console lighting and now im 2/3 lights out..., lost one console and need help...i left the 3rd cause id probably strike out... im not too good at all with positives or negatives but the middle one when i turned power on it went on then off and never back on... someone help me!
the DIY was only good for so much...lol please help!
Replies 7
Sway84Thread starterToronto Ontario Canada · Jun 21, 2007#2is it neo wedge led type a or type b? from autolumination.com
vodkalushRochester, NY · Jun 21, 2007#3it sounds like your putting them in backwards... and if left on to long will cause the LED to burn out...
"Type B Neo - Wedge Instrument Panel Bulbs are 10mm (3/8") diameter x 13mm (1/2") high"
this page
http://autolumination.com/74.htm 10th from the bottom
unless i am incorrect in which please correct me
Sway84Thread starterToronto Ontario Canada · Jun 22, 2007#4now vodka are they just housings or housings with the LED on?
vodkalushRochester, NY · Jun 22, 2007#5well it depends on what your changing... since you referenced the autolumination.com site i am assuming that you are changing out your temperature controls/fan/shifter light
if your changing your speedo cluster color then thats a completely different story and there are links to the LEDs i used in that thread...
whooppee777Maryland · Jun 28, 2007#6are these neo wedge type b bulbs the bulbs for the 3 giant knobs for the climate control? and are they the same as the light in the shifter for the auto trans?
brickhardmeatInner City, Dallas · Jun 28, 2007#7 Originally Posted by
whooppee777 ↑ are these neo wedge type b bulbs the bulbs for the 3 giant knobs for the climate control? and are they the same as the light in the shifter for the auto trans?
the auto shifter is a different base
redyarisOrlando, FL · Jun 28, 2007#8The neo wedge bulbs come with a base.
http://autolumination.com/74.htm Picture not included in this copy When you insert the base of the bulb in the AC controls turn it clockwise to lock it with a pen.
If it doesnt light up immediately take it out and turn it around and try again.
If you leave in an LED that is not illuminating it will pull load from elsewhere and start frying things.
The shifter bulb is the TRI POWER bulb. Its not a wedge base. Its a direct plug in type.
Picture not included in this copy Purchase them from autolumination.com. They are VERY reasonable, you can order direct from their website and shipping is VERY quick.
I redid my entire interior and license plate and not one problem.