Yarisworld Archive

DIY Hood Cylinder

47 posts · 13,942 views

churpOriginal postTropical Minnesota · Jun 20, 2007#1
Not wanting to infringe on the group buy for the same item, I'll start this thread(...thanks to the encouragement of Charles and Brick!)

Ordered the parts today:
MSC #: 00483743----------------$15.43----- 30# cyl w 7" stroke
MSC #: 32912198---2@.72-----$1.44------- ball stud
MSC #: 32912206---2@.24-----$0.48 -------retainer clip
total---------------------------------$17.35

They should be in Thursday, if so I'll have it installed that night. I plan to make a bracket off or the motor mount and another off the hood hinge mount, utilizing the existing bolts, so no drilling and simply a bolt on with no under the fender stud sticking thru to try to put a nut on. I ordered the 30# cylinder because I would rather have more rather than not enough pressure on the first try...I actually think the 20# would be the one but could actually be the 10#.

A post on the group buy thread mentioned cheap isn't always the best, and that may be true, but in this case I have to say these cylinders are every bit the quality that the group buy will be getting, if not from the same manufacturer. I believe this will be the chrome plated cylinder, but not certain because picture doesn't always match (but the cheaper ones show black). Did I mention the total price could be lower by about $3 if someone wanted to scrimp (buying the ends separate from the cylinder).

Congrats to the ones going with the group buy, I'd say they probably buying a good product, and anyone in the business has to make a profit (they're asking a fair price). I'm just offering some savings to the do-it-youselfers at the same quality level (minus the 10 hp sticker) because right now I'm not in the business.

If the parts come in, pics will be posted at least by Saturday....with no drilling or reaching in the fenderwell. 🤘

Replies 46

yrsdrgnSF,CA · Jun 20, 2007#2
Hook it up!!!
Black YarisToledo, OH · Jun 20, 2007#3
I am not trying to be a dick and burst your bubble, but it will not work there... the cylinder is going to colapse befor the hood shuts fully... they tried that in that position you mentioned
churpThread starterTropical Minnesota · Jun 20, 2007#4
Originally Posted by Black Yaris ↑
I am not trying to be a dick and burst your bubble, but it will not work there... the cylinder is going to colapse befor the hood shuts fully... they tried that in that position you mentioned
I did mention that a bracket is required! Pics will be posted the day the parts come. Imagination is what I get paid for, not hard work. 😁
Black YarisToledo, OH · Jun 20, 2007#5
Oh did they have brackets.... many many brackets.... Give it a shot Churp, worst that can happen is you have to exchange it for a different one...
churpThread starterTropical Minnesota · Jun 20, 2007#6
Purchased brackets won't work....that's why I have to make one (actually 2 because I won't drill holes in a car unless absolutely needed). This is so simple from what I've done every day for the last 25 to 30 years, that I can't believe anyone would doubt this type of project. My only concern is the pressure of the gas spring, which will work , but may work better with less.

Have faith, theres millions of ways to do anything! Clean and functional are the main goals. There's no way I can improve function over something that works, I can sometimes improve ease of installation, and beauty is always in the eye of the beholder so some may like it,some not. We'll see in a couple days (just hope the parts come in). I really don't want to copy what is shown on the other post, so worst case if my brackets don't work I'll give these pieces to Brick (since he stated he was a little down on cash😁 ) and he can mount them like the pictures of the group buy, all it looks like that's different is the plastic rod end down by the strut tower, about a dollar.
churpThread starterTropical Minnesota · Jun 20, 2007#7
Black Yaris .....I apologize for the off topic on your thread. After rereading you 1st post there, realized how far off I was. I'll try to contain myself better.....
Black YarisToledo, OH · Jun 20, 2007#8
no hard feelings...
cali yarisCanoga Park, CA · Jun 20, 2007#9
:: watching :: !!!
yrsdrgnSF,CA · Jun 20, 2007#10
What happened to the original Hood lift post from Black Yaris? I've been trying to find it with no results...............
ChinoCharlesOH · Jun 20, 2007#11
Originally Posted by yrsdrgn ↑
What happened to the original Hood lift post from Black Yaris? I've been trying to find it with no results...............
It is linked in his signature.

Churp, I'm watching and you have PM.
yrsdrgnSF,CA · Jun 20, 2007#12
haha I tried the link in his sig but it don't work...says it's invalid or something
Black YarisToledo, OH · Jun 20, 2007#13
they pulled the thread
ChinoCharlesOH · Jun 20, 2007#14
😆 Gotta play by the rules kids.
yrsdrgnSF,CA · Jun 20, 2007#15
o. Sorry to hear that. I was hoping to see a vid of the original. Make a new thread in the Classified section!!! ^^ iono just an idea n once again sorry for interfering with your original thread
PetersRedYarisThe Black Hills of South Dakota · Jun 20, 2007#16
Hey Black Yaris, In your signiture with the redline racing it says "Lift kit coming soon". I know that's for a hood lift, but it reminds me, I'm thinking about going rally style with some extra gound clearance and a nice skid plate/light combo.
churpThread starterTropical Minnesota · Jun 20, 2007#17
Don't have the parts yet but the prptotype brackets are made. Painted them silver to show better in the pic's...and these are prototypes with extra holes, etc. The lower bracket is made way too thick, 1/8" material will do. At least you get the idea with these pic's....top hood hinge bolt removed then used to mount the top bracket, there is a relief in the bracket so the 2nd hinge bolt does not need to be removed but the bracket is restrained from turning by the bolt head.....the front motor mount bolt is used to hold the bottom bracket, which rises between the washer fill neck and the air conditioning check/fill block. The angle of the cylinder with hood closed is slight enough to not apply upward pressure. Don't see any interference points and dimensions should work.

When the other parts arrive it should take less than 10 minutes to see if they work....then it will be making purty brackets without all the holes, and purtier pic's (not too purty tho because my camera's crap).

Edit: made a lower bracket out of 1/8" x 1" and it is too weak......1/4" x 1" like the prototype should be used.

4 attachments not included in this copy

PetersRedYarisThe Black Hills of South Dakota · Jun 20, 2007#18
Look's like aluminum... Good work, can't wait to see the finished product.
ChinoCharlesOH · Jun 21, 2007#19
🙇

Instant gratification.
yrsdrgnSF,CA · Jun 21, 2007#20
nice
LucaItalia83Garda Lake -Italy - Verona · Jun 21, 2007#21
mmm where is the post of the buy group ?
churpThread starterTropical Minnesota · Jun 21, 2007#22
Got the cylinder this morning and installed in about 2 minutes at break. Works great...at about half way up the hood will hold itself, 3/4 of the way it will raise itself, below half way hood will drop and latch itself so you don't have to slam the hood. Most time consuming part was removing the bar code sticker from the cylinder.

Will try to post completed pic's tonight. I'm happy!!!!👍
OxyG3nEMontreal , Quebec , Canada · Jun 21, 2007#23
it make me want make my own kit too lol
churpThread starterTropical Minnesota · Jun 21, 2007#24
finally got pic's just before the downpour.

Pic 1 hood all the way up
Pic 2 neutral position
Pic's 3-5 cylinder views
Sorry about the dirty engine🤷

Some may feel the 30# cylinder is a little weak if they want the hood to rise more on it's own, so 40# would be better with these brackets. The ball studs both require 5/16" mounting holes in the brackets, 5/16-18 nuts, and optional star lock washers. Both the holes in the brackets for the mounting bolts are 10 mm or about .40" in diameter. The stud hole in the lower bracket is about 6" from the bend, and the mounting hole is 1.5" from the bend.

Would like to get more detailed but may not have time till next week. Actually all the info is in this thread but pretty disjointed...PM me if more info is needed, or can put togeather a more complete post with finished brackets (not the prototypes shown here) if interested.

The brackets were only painted aluminum for these pic's....be creative aluminum or stainless can be polished, powder coated or painted. Costs were...$17+ for cylinder and attachments, shipping from MSC estimated at $5 (haven't received the bill at work),scrap steel used for brackets, and 2 nuts w/4 star lockwashers. No drilling was done on the car and existing Yarii bolts were used for mounting. Good luck

5 attachments not included in this copy

yrsdrgnSF,CA · Jun 21, 2007#25
Looks pretty good
kimonaHuntington Bch, CA · Jun 21, 2007#26
I think it's great!

The 30# cylinder is probably quite satisfactory; it supports the hood at 50% and 100%, and makes for an gentle close without having to slam the hood.
cali yarisCanoga Park, CA · Jun 21, 2007#27
nice!! and... the halfway position is GREAT for car shows. c'mon send me one... !!

plus.....then I can re-locate my battery to the trunk more easily. yeah!
yrsdrgnSF,CA · Jun 21, 2007#28
Originally Posted by cali yaris ↑
nice!! and... the halfway position is GREAT for car shows. c'mon send me one... !!

plus.....then I can re-locate my battery to the trunk more easily. yeah!
I'm curious as to why you want to relocate the battery to the trunk
YarisGuyUSA · Jun 21, 2007#29
Very cool 👏
churpThread starterTropical Minnesota · Jun 21, 2007#30
Originally Posted by kimona54 ↑
I think it's great!

The 30# cylinder is probably quite satisfactory; it supports the hood at 50% and 100%, and makes for an gentle close without having to slam the hood.
I'm happy with the 30# cylinder, and it holds well when all the way up (which is the important goal)....just wanted to make sure that everyone knew that the 40# would also work fine, just a little stiffer, but the 20# is probably a no-go. All related to where I positioned my brackets of course...and there is no cost difference between the cylinders (by #'s force anyway). Also the polished stainless cylinders are available from MSC for $40-$50......other resources for cylinders on line are McMaster Carr and Graingers, plus probably many more.
churpThread starterTropical Minnesota · Jun 22, 2007#31
Made a lower bracket out of 1/8" material tonight and it is too weak....It needs to be 1/4" x 1" like the prototype, which is a bear for the do-it-yourselfer to do. I made the prototype in a large shop vise using a BFHammer, other ways would be heating at the bend with a torch, or using a press brake if available. Just letting you know!🤷
churpThread starterTropical Minnesota · Jun 23, 2007#32
Originally Posted by LucaItalia83 ↑
mmm where is the post of the buy group ?
Not sure. 🤷 ...I may have missed a few of the last posts on that thread. But can't believe a group buy couldn't be set up by anyone....just whoever sets it up would have to insure they have no ties with the supplier or in business for themselves. I'm assuming the forums rules try to insure sales threads are kept in classifieds or supporting vendor categories...hope I'm not too far off base in assuming this.
Black YarisToledo, OH · Jun 23, 2007#33
that is what happened... I goofed and got shut down :(
Black YarisToledo, OH · Jun 23, 2007#34
Originally Posted by yrsdrgn ↑
I'm curious as to why you want to relocate the battery to the trunk
so you can gut the spare and rear seats, move the battery to the back for better weight distubtion
SabretoothSt Cloud FL · Jun 23, 2007#35
Woo, lets get rear ended, then let the acid leak into the gas tank!

Kaboom anyone?
eTiMaGoBangkok, Thailand · Jun 23, 2007#36
that would need a very very veeery unfortunate, unlucky, and improbable sequence of events to puncture both the battery and the tank and have the liquids mix!!
churpThread starterTropical Minnesota · Jun 23, 2007#37
Moving the battery to improve handling is very common.....almost all street rods place them in the back and on MR2's they're moved to the front. Excellant idea for a Yaris....battery and can of flat fix in back, then you're able to modify and install the exhaust in the center of the rear for looks!
yrsdrgnSF,CA · Jun 24, 2007#38
haha. how hard would it be to move the battery to the back of the car?
churpThread starterTropical Minnesota · Jun 24, 2007#39
Originally Posted by yrsdrgn ↑
haha. how hard would it be to move the battery to the back of the car?
Usually a well mounted battery box to contain any spills (or a gell battery) and some long lengths of welding cable!!!!😁
yrsdrgnSF,CA · Jun 24, 2007#40
LOL if anyone does it be sure to post a DIY!!!!!! i might just follow LOL
YarisGuyUSA · Jun 24, 2007#41
Originally Posted by Sabretooth ↑
Woo, lets get rear ended, then let the acid leak into the gas tank!

Kaboom anyone?

People have been relocating their batteries to the trunk for many years now. It is not a new trick, and if done properly it poses no safety hazards. I have owned several cars with batteries in the trunk for several years.
yrsdrgnSF,CA · Jun 24, 2007#42
And since the Yaris is small I take it that it'll be somewhat easy to relocate it?
churpThread starterTropical Minnesota · Jun 24, 2007#43
Small doesn't necessarily mean easy....routing the cables so there's no rubbing that could cause a short is a primary concern. The spare tire well is fairly big so that should be easy mounting the battery.
yrsdrgnSF,CA · Jun 24, 2007#44
oic. anywho, how's the hood cylinder doing? any more bracket revisions?
churpThread starterTropical Minnesota · Jun 24, 2007#45
DIY thread cleaned up without remaking brackets (too busy). I placed it in the DIY category rather than the 'cosmetic'..........................
yrsdrgnSF,CA · Jun 24, 2007#46
Well you did document it while you were DIY-ing lol