Yarisworld Archive

placement of Vitz emblem?

17 posts · 7,895 views

cali yarisOriginal postCanoga Park, CA · Jun 14, 2007#1
ok, sue me for wanting this perfect, but has anyone actually measured for the exact JDM placement of the "Vitz" emblem for the left rear on the L/B?

Replies 16

cali yarisThread starterCanoga Park, CA · Jun 14, 2007#2
:bump:

Most pictures on the 'net show right placement, but the Japanese Toyota website clearly shows left placement.
AstromanWenatchee, WA · Jun 14, 2007#3
A small toy vitz i bought shows the placement on the left as well. The right side would be incorrect (but is correct for the USDM Yaris emblem).
sdmfchicago · Jun 15, 2007#4
got mine on the left, i take a pic later
kimonaHuntington Bch, CA · Jun 15, 2007#5
Sounds like you want it to be exact!!!

So, you've got to contact a Vitz owner in Japan to get the exact measurements for factory placement of that emblem.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 15, 2007#6
mine's on the left and i have an RS grill emblem next to that. on the left i have a TRD GRILL emblem on the left.....
HTM Yarissouth Carolina · Jun 15, 2007#7
🍻

2 attachments not included in this copy

cali yarisThread starterCanoga Park, CA · Jun 15, 2007#8
GREAT PICTURES 👍
uncleyarisToronto · Jun 15, 2007#9
From all the pics I've seen, it is in the exact location that we have the toyota emblem. Measure mark and place, done!!
acdaaznNJ · Jun 15, 2007#10
1) Take tape [the papery kind] and outline the "Yaris" on the right, but extend the top and bottom all the way past the center and to the tail lights. Make sure the tape is as straight as possible. [It might not be parallel to the ground because the emblem is not 100% parallel, it's a bit slanted]
2) Reflect the 2 lines from the center by measuring where the lines are in comparison to the tail lights.
3) Measure the position of the beginning and end of the "Yaris" emblem and make the marking on the left side [draw on the tape]
4) Place Vitz in the center of the left side.
5) Take a picture and upload to YW.

PS While you are at it, do a picture DIY as well. That would be awesome.
uncleyarisToronto · Jun 15, 2007#11
Originally Posted by acdaazn ↑
1) Take tape [the papery kind] and outline the "Yaris" on the right, but extend the top and bottom all the way past the center and to the tail lights. Make sure the tape is as straight as possible. [It might not be parallel to the ground because the emblem is not 100% parallel, it's a bit slanted]
2) Reflect the 2 lines from the center by measuring where the lines are in comparison to the tail lights.
3) Measure the position of the beginning and end of the "Yaris" emblem and make the marking on the left side [draw on the tape]
4) Place Vitz in the center of the left side.
5) Take a picture and upload to YW.
Ya, what he said!!
JosephDocCA, USA · Jun 15, 2007#12
Picture not included in this copy
Get rid of dead bugs on bumper = best veiw I have seen.
Tein's sponsorship?
tacsniperCalgary, Canada · Jun 19, 2007#13
woohooo I just got the Netz and Vitz... now the question is.... how do you remove the "Yaris" emblem off the hood? Do I get a hair dryer and blow at the emblem until it removes?
hatchbackkid82. · Jun 20, 2007#14
here i was thinking that i was the only one with the bug problem.
sdmfchicago · Jun 20, 2007#15
for the front, just go behind the bumper and unclip it. then put in the new one
cali yarisThread starterCanoga Park, CA · Jun 20, 2007#16
actually, I just yanked the front emblem right off with a pair of pliers, and nothing broke. The new one just snaps into the holes.
DorytheYarisJersey · Jun 21, 2007#17
Originally Posted by HTM Yaris ↑
🍻
Crazy, I have a VVT-i emblem on the right hand side of my hatch as well. (I have Yaris on the left hand side rather than Vitz, though). Just thought it was neat, never knew anyone else who did that on here.