Yarisworld Archive

GROUP BUY: JDM Eyelids

187 posts · 46,563 views · page 2 of 4

Replies continued

ASHRAFHouston, TX · Jun 12, 2007#51
I'll be waiting :D
paradigmFairfield, CA · Jun 12, 2007#52
most definitely awesome.
JosephDocCA, USA · Jun 12, 2007#53
Originally Posted by tk-421 ↑
The Rules (Suggestions for this section welcome)
[/SIZE]
  • The group buy will officially begin on Monday, June 11th
  • The item must be paid in full a before the deadline, which for now is set to June 25th (this date may change based on how quickly members sign up)
  • Payments will be made through PayPal only. This is mainly for speed/convenience, but also because it's easier to resolve disputes if a problem were to arise (knock on wood)
  • Members will need to make a decision on what they want before the 25th in order to prevent delays. We will not be made responsible if members change their mind after the order has been placed
  • Please keep in mind that we are just members and that we are doing this to help others out. We will be doing this out of our own time and we will not profit from it. If something is wrong with the shipment (i.e. a product is not what you ordered/is defective/is not an the exact color match), we will do what we can to help you out, but we cannot be made responsible if the seller screws up the order.
Question... Do we start sending payment yet? When/Where?
It is my first GB. I am all excited!🎉

Joseph
tk-421Thread starterDagobah · Jun 12, 2007#54
I just got back from meeting the fiberglass dude a few minutes ago. He showed me a few of his current projects (i.e. he made a Ferrari body for a VW sedan that's off the hook)... Suffice to say that he'll be able to fab up the eyelids with one hand tied behind his back.

So... We've got two choices, people: We can either go for the original JDM eyelids which cost a pretty penny (not including paypal fees + shipping it all from Japan), or we can get an exact replica of the item (including paint matching and 3M backing tape) for quite a lot less money. How much less? I'll run the numbers and let you know tomorrow!

What do you guys think?
tk-421Thread starterDagobah · Jun 12, 2007#55
Originally Posted by JosephDoc ↑
Question... Do we start sending payment yet? When/Where?
It is my first GB. I am all excited!🎉

Joseph
This will depend on whether you guys decide to go for the expensive stuff or not. If you guys would rather go JDM, the payments would have to be made to Kenbow, who will in turn buy and ship everything to a contact in the US.

If you would rather save a big chunk of change and go for the quality replicas, your money would have to go to my PayPal account and I would do the distribution to said US contact.
yrsdrgnSF,CA · Jun 12, 2007#56
I'd rather save a chunk of money for quality replicas. tk-421 ask that guy to come up with some mock-ups and then you can show the pics and make another thread. Just a thought
ASHRAFHouston, TX · Jun 13, 2007#57
quality replicas sounds good for me

but shipping from Japan to Australia is cheaper than from US

so I guess I can't decide untill I have the final price inc. shipping for both

cYa
JosephDocCA, USA · Jun 13, 2007#58
JDM PLZ!
tk-421Thread starterDagobah · Jun 13, 2007#59
Originally Posted by JosephDoc ↑
JDM PLZ!
I have just received word that Kenbow has now fully activated his PayPal account. Guys that want (or, in JosephDoc's case, need 😉) JDM parts, please PM me so that I can consider you for the first JDM batch. I will also be in that batch, but only because I need a pair in order to make exact mockups over here. This fabricator will make a few more pair in order to sell them, so hopefully the JDM's will pay for themselves that way. 😁

If people would rather pay for express shipping (such as myself), pls also let me know in advance in order to coordinate it with Kenbow. I am currently still waiting to get the shipping quotes, so please hang in there a little longer. 🙇

More news as it develops... 🙌
yrsdrgnSF,CA · Jun 20, 2007#60
wut happened here? any new updates? I'm still hungry for eyelids
laszloventura cal · Jun 20, 2007#61
also would like to get eyelids thanks laszlo
tk-421Thread starterDagobah · Jun 20, 2007#62
@lazlo: Model & color code plz!

I apologize to everybody for the slow updates. I have yet to receive an update from Kenbow and/or SecondStage. I have just sent another e-mail to see if they'll actually have anything new for us.

The fabricator is coming in today to make the necessary measurements for the mold. He should be able to get back at me before this week is over with the prices.

I will keep you guys updated. Thanks for your patience!
tk-421Thread starterDagobah · Jun 20, 2007#63
I've just placed a quote to japanparts on the JDM eyelids. I'm hoping they may be able to help us out (it may be too small a GB at this point as far as shipping discounts are concerned, although I'm giving it a shot anyway).

I'll let you guys know as soon as I get a response. 👍
yrsdrgnSF,CA · Jun 20, 2007#64
sweetness!!!!!!
DJ_TrizzakVancouver, BC · Jun 20, 2007#65
what's the problem on it? I'm so lost lol
tk-421Thread starterDagobah · Jun 20, 2007#66
Originally Posted by DJ_Trizzak ↑
what's the problem on it? I'm so lost lol
Sorry for the confusion! 😁

It's simply that I'm having a hard time securing a deal with the store directly, so I'm now going to try using japanparts as an intermediary. I'm hoping they'll be able to buy the parts and ship them over here to us.

Hope this clears it up a bit 😳
yrsdrgnSF,CA · Jun 21, 2007#67
Cool. Can't wait........well I guess I can't (literally) so I used some of my extra "black headlight tint film" to make some Type A eyelids for my headlights for now.......only one side is done.......must make the other side!!!

2 attachments not included in this copy

tk-421Thread starterDagobah · Jun 22, 2007#68
that looks pretty kewl bro!
I see you made them a bit more curved than Type A, though... I can custom make them like that for ya if you're interested. The fabricator's coming in tomorrow morning to make molds out of my lights.
yrsdrgnSF,CA · Jun 22, 2007#69
nah......i want the type A as it comes not modified lol. This is just my temporary set of "eyelids" that are somewhat transparent LOL now to make a thread in the cosmetic section
tca4Delta,BC · Jun 22, 2007#70
Which one is the JDM ones???
tk-421Thread starterDagobah · Jun 22, 2007#71
Originally Posted by tca4 ↑
Which one is the JDM ones???
JDM's are the ones that you see on the pics. I will be fabricating some that will look exactly the same within the next few days, but that's a different topic.

I will be creating a separate thread for the replicas when the time comes in order to keep the confusion levels down as much as possible. 😉
yrsdrgnSF,CA · Jun 22, 2007#72
Hit me with them replicas!!!!!! LOL I'm all for JDM but I'm also cheap haha. =P
tca4Delta,BC · Jun 22, 2007#73
Okay waiting for your replicas then =)
tk-421Thread starterDagobah · Jun 22, 2007#74
Originally Posted by yrsdrgn ↑
Hit me with them replicas!!!!!! LOL I'm all for JDM but I'm also cheap haha. =P
Originally Posted by tca4 ↑
Okay waiting for your replicas then =)
Kool! You've been added to the list.

The molds were started today and will be done by tomorrow. If things go the way they have so far, we should all be seeing very nice replicas before this month is up! 👍
tk-421Thread starterDagobah · Jun 22, 2007#75
As far as the JDM stuff goes, I've yet to receive a response from SecondStage, japanparts, or even Kenbow. It's like Godzilla swallowed everybody over there!

Picture not included in this copy
yrsdrgnSF,CA · Jun 22, 2007#76
o no!!! LOL

Right now I'm using my "smoked out" spray to futher enhance the eyelids apperance LOL. I'll take a picture of the sprayed one compared to the non sprayed one LOL brb
yrsdrgnSF,CA · Jun 22, 2007#77
ok new pictures....i sprayed them with the tint spray LOL. I know, I know....my left eyelid looks a bit bigger than the right one but hey.....it was all done freestyle while i already had the vinyl on the headlights lol..temporary =P

2 attachments not included in this copy

eTiMaGoBangkok, Thailand · Jun 23, 2007#78
little yaris looks angry... 😁
yrsdrgnSF,CA · Jun 23, 2007#79
haha have to make it look aggressive somehow LOL
njyarisNORTHERN NEW JERSEY · Jun 23, 2007#80
JDM Replica .. is good with me!!! .. i def buying!
yrsdrgnSF,CA · Jun 24, 2007#81
any updates tk-421?
DMartSouth GA · Jun 24, 2007#82
i'm in...for the replicas
tk-421Thread starterDagobah · Jun 24, 2007#83
Originally Posted by yrsdrgn ↑
any updates tk-421?
The molds didn't come out right on the first try. The guy will try to come back tomorrow (today) to try again with some other materials.

We're currently aiming to have the first batch ready in no more than 2 weeks. The big issue I'm having at the moment however is paint. I have to find a guy that works with these paint codes on a frequent basis. I'm thinking somebody at the dealership where I got my car from...

The wait will definitely be worth it fellas. Just hang in there! 🙇
yrsdrgnSF,CA · Jun 24, 2007#84
Hanging tight. Props to you man. I want cf ones haha even though that'd be crazy but it'd match a cf hood in the future ^^
tca4Delta,BC · Jun 24, 2007#85
Okay !! Im exciting to see the result =)
tk-421Thread starterDagobah · Jun 24, 2007#86
BTW, there are some questions that I would like to ask potential buyers:
  1. Do you guys want me to sell you the eyelids with the glue/tape, or would you rather get it by yourselves?
  2. Would you guys prefer the eyelids to stick to the headlights or the hood? (Different approaches are needed for each application)
  3. Who is willing to be the GB recipient in the US? Please let me know
  4. How much would you guys be willing to pay for these? Please PM me what you would be willing to pay, and I'll try to meet you guys halfway.
I promise to post pics as soon as the 1st pair is finalized. I am stoked to see what this guy can do with the right materials... 😲
yrsdrgnSF,CA · Jun 24, 2007#87
1. Yes I would appreciate if you provided the glue/tape but if you can't I can buy some at a store that I know of.
2. I prefer my eyelids to stick to my headlights hehe =p
3. I cannot be the GB recipient in the US because of parents
4. I'll PM you shortly.

Edit: totally forgot to re-read the first post in this thread. my bad
DMartSouth GA · Jun 24, 2007#88
1. same as yrsdrgn, if u can cool, if u cant, no prob
2. headlights
3. same as yrsdrgn...parents
4. I'll pm ya
DMartSouth GA · Jun 24, 2007#89
by the way i have the meteorite metallic LB, that's the IF8 color code, right?
tk-421Thread starterDagobah · Jun 24, 2007#90
Originally Posted by DMart ↑
by the way i have the meteorite metallic LB, that's the IF8 color code, right?
That's correct. 😉

@njyaris: I still need your model and color plz
KioshiFremont, CA · Jun 24, 2007#91
I am down. But Im in a hurry (due to work) and not noticing the address of whom or where to do the transaction....
My car info: 2007 yaris LB
Color: Bayou Blue - 8T1
Type of Eyelids: B type

Edit: fabricated ones are a go for me....seems a bit steep for JDM ones~
eTiMaGoBangkok, Thailand · Jun 24, 2007#92
Originally Posted by tk-421 ↑
BTW, there are some questions that I would like to ask potential buyers:
  1. Do you guys want me to sell you the eyelids with the glue/tape, or would you rather get it by yourselves?
  2. Would you guys prefer the eyelids to stick to the headlights or the hood? (Different approaches are needed for each application)
  3. Who is willing to be the GB recipient in the US? Please let me know
  4. How much would you guys be willing to pay for these? Please PM me what you would be willing to pay, and I'll try to meet you guys halfway.
I promise to post pics as soon as the 1st pair is finalized. I am stoked to see what this guy can do with the right materials... 😲
1. If you can include the proper extra strong, thin tape, I think it would be better...
2. Stuck on the headlights would definitely be easier
3. If I were in the US.... 😁
4. Whatever is fair 😉
tca4Delta,BC · Jun 24, 2007#93
1. same as everyone so far, provide the tape
2. Stuck on headlights
3. I live in Canada
4. Just dont go exceed the limit.
tk-421Thread starterDagobah · Jun 24, 2007#94
Quick update: Looks like the Type A molds are a go! I was told by the fabricator that the 1st pair should be done no later than wednesday! 👍

As far as CF and/or Type B eyelids, they may have to be a bit more expensive to cover the cost involved in making just one or two pair. Plus they may take longer to make. If you guys are cool with that, then let me know.
tk-421Thread starterDagobah · Jun 24, 2007#95
On that same note, I'm thinking about making different designs for you guys. So far, I've found some eyelids made by Black Yaris. He fabbed these using vinyl, but the final design would also be done in fiberglass and color matched accordingly.


Picture not included in this copy

What do you guys think of these? Would anybody be interested in this design?
yrsdrgnSF,CA · Jun 24, 2007#96
I still prefer Type A...............how much for a carbon fiber mock up of Type A eyelid? I want carbon fiber ones!!! LOL
eTiMaGoBangkok, Thailand · Jun 24, 2007#97
A is for Awesome FTW... They fit perfectly in the edge lines of the hood, almost a factory look. Black Yaris's style is perhaps a more aggressive design but IMO does not suit the car as well.

but that's just one man's opinion 😉
yrsdrgnSF,CA · Jun 24, 2007#98
I think Black Yaris's eyelids should be Type B for badass =P as for mine......they're just out of place LOL
KioshiFremont, CA · Jun 25, 2007#99
I perfer type B, but seeing Black Yaris's ones....I'm up for that if you can give that a go w/ color matching..
tk-421Thread starterDagobah · Jun 25, 2007#100
Originally Posted by Kioshi ↑
I perfer type B, but seeing Black Yaris's ones....I'm up for that if you can give that a go w/ color matching..
I'll call the dude and let you know.