kimonaOriginal postHuntington Bch, CA · Jun 6, 2007#1I can get a set of these Mini wheels... cheap. Do you think they look good on a Yaris?
Joey1320 used to run them on his car before he went to 15's, and I thought they looked really nice. I hope he doesn't mind me attaching a photo of his Yaris.
I'd appreciate your feedback. Thanks
1 attachment not included in this copy
Replies 21
brickhardmeatInner City, Dallas · Jun 6, 2007#2I like the look, I do prefer 15's on the Yaris but they look real good. They hide the brakes well and they are very stylish.👍
cali yarisCanoga Park, CA · Jun 6, 2007#3just ok to my eye, but for "cheap", go for it!!
churpTropical Minnesota · Jun 6, 2007#4I like these over a lot of the aftermarket! 👍
grampiOhio · Jun 7, 2007#5They look pretty nice, but they also look like they are a huge diameter and might cause rubbing issues. What size are these rims?
kimonaThread starterHuntington Bch, CA · Jun 7, 2007#617x7, ET48, 205/45/17
No issues with rubbing whatsoever, and I can get custom hubcentric rings made for @$50.
brickhardmeatInner City, Dallas · Jun 7, 2007#7 Originally Posted by
grampi ↑ They look pretty nice, but they also look like they are a huge diameter and might cause rubbing issues. What size are these rims?
The car pictured is also lowered not sure if those are DF's or Tein
PetersRedYarisThe Black Hills of South Dakota · Jun 7, 2007#8 Originally Posted by
brickhardmeat ↑ The car pictured is also lowered not sure if those are DF's or Tein
That drop looks identical to mine. Most likely those are NF's or TRD's.
brickhardmeatInner City, Dallas · Jun 7, 2007#9Well I remember the thread that Joey1320 started about the DF's or Tein S Tech but not sure what he ended up with. Looks a little low in the rear to me but could be shadow.
YarisGuyUSA · Jun 7, 2007#10Those wheels look great on that car. I would say a drop is a must with such wheels.
joey1320Lakewood, Ohio · Jun 9, 2007#11the wheels are 17" x 7". the drop is df and yes the back did sit a bit lower than the front, not much but still there.
i only had rubbing issues because the tire sidewalls were 45, if you go to 40 you should be ok. i really liked those wheels but they were kind of heavy thats why i'm rolling on steelies until i get some 15".
brickhardmeatInner City, Dallas · Jun 9, 2007#12what was the offset again? must have been +38 and not +48 like posted above. They rubbed?
I really like the look on this car also.
kimonaThread starterHuntington Bch, CA · Jun 9, 2007#13No, the offset is +48mm on that Mini Cooper wheel above.
joey1320Lakewood, Ohio · Jun 9, 2007#14 Originally Posted by
brickhardmeat ↑ what was the offset again? must have been +38 and not +48 like posted above. They rubbed?
I really like the look on this car also.
thanks i just got done washing it. i was never able to get the Rota SubZero wheels off my brother, so as soon as i get new wheels i'll take pics.
brickhardmeatInner City, Dallas · Jun 9, 2007#15so the rubbing was on the inside with that offset? +48 is pretty deeply tucked in.
kimonaThread starterHuntington Bch, CA · Jun 9, 2007#16 Originally Posted by
brickhardmeat ↑ so the rubbing was on the inside with that offset? +48 is pretty deeply tucked in.
Not really... OEM alloys are 45mm (15's) and 51mm (JDM 16's).
brickhardmeatInner City, Dallas · Jun 9, 2007#17 Originally Posted by
kimona54 ↑ Not really... OEM alloys are 45mm (15's) and 51mm (JDM 16's).
ok, 8mm isn't much but I can say my +40 are very flush in the front and could use a 5mm spacer in the rear😁
joey1320Lakewood, Ohio · Jun 9, 2007#18 Originally Posted by
brickhardmeat ↑ so the rubbing was on the inside with that offset? +48 is pretty deeply tucked in.
no inside rubbing at all. just the outer corner rubbing on the front fender liner by the front bumper. but something fixable with a 40 sidewall tire.
grampiOhio · Jun 9, 2007#19 Originally Posted by
YarisGuy ↑ Those wheels look great on that car. I would say a drop is a must with such wheels.
Did you see how close those tires are to the inside of the wheel wells? If he drops it any, the wheel wells will be sitting on top of the tires! They must rub as it is.
joey1320Lakewood, Ohio · Jun 9, 2007#20 Originally Posted by
grampi ↑ Did you see how close those tires are to the inside of the wheel wells? If he drops it any, the wheel wells will be sitting on top of the tires! They must rub as it is.
no they don't.. i drove around for 2 months and they didn't rub inside!
brickhardmeatInner City, Dallas · Jun 9, 2007#21 Originally Posted by
joey1320 ↑ no inside rubbing at all. just the outer corner rubbing on the front fender liner by the front bumper. but something fixable with a 40 sidewall tire.
👍
webomaticsNew Jersey · Jun 9, 2007#22👍 Love those wheels bro it looks like thy were OEM.👍