Where did purchase the duplicolor perfect match paint? Looking for 1F8 (meteorite metallic) and having issues finding it.
Front Lip...Ordered one today (99 - 00 Civic)
59 posts · 20,496 views · page 2 of 2
Replies continued
Very nice. Looks like a bullet proof "old school" set-up. Now, to configure your clean room environment. Expecting a complete re-spray in the near future. Exciting.
Hi jjbG35Yaris.Originally Posted by jjbG35yaris ↑Where did purchase the duplicolor perfect match paint? Looking for 1F8 (meteorite metallic) and having issues finding it.
Canadian Tire in Canada sells the Duplicolor line. I don't think they make 1F8 as I looked for it. My 2008 Yaris has that paint. I had a local shop mix up a spray bomb.
Here is a link to a site that has the product you're looking for:
http://www.automotivetouchup.com/tou...aris/?code=1F8
It is a beast, Kimona. I got all my fittings hooked up and tested it with sustained spraying (air only at this point). It should easily capable of painting a car and maintaining pressure. It will run intermittently, of course.Originally Posted by kimona ↑Very nice. Looks like a bullet proof "old school" set-up. Now, to configure your clean room environment. Expecting a complete re-spray in the near future. Exciting.
I did some light maintenance: oil change, cut new foam filters and cleaned the felt filters. Also, cleaned it up well including all the crud out of the fins.
Yes, the spray booth...
I've been doing a lot of reading. Negative pressure seems to be the way to go, but I'm leaning toward blowing the stuff out of the enclosure. I'll dedicate 1/2 of my garage to a booth. 2 20 box fans and 2 20" furnace filters.
If you were to strive for, and get to the point of a negative pressure environment, you might as well change professions.
What's the top psi and sustained cfm of that ugly sow?
Sent from my Elite_5_5_Octa using Tapatalk
What's the top psi and sustained cfm of that ugly sow?
Sent from my Elite_5_5_Octa using Tapatalk
Haha, ugly sow she is! Not certain as I have yet to find any info on the compressor itself. I've posted on a site that is dedicated to all things compressors and am hoping that someone on there can tell me. I also plan to write the company, Champion Pneumatic Machinery, (or the latest iteration of the company) and see what specs are on the head unit itself. Since it's a home built, I doubt there's any real way of knowing what the unit is capable of.Originally Posted by WeeYari ↑If you were to strive for, and get to the point of a negative pressure environment, you might as well change professions.
What's the top psi and sustained cfm of that ugly sow?
Sent from my Elite_5_5_Octa using Tapatalk
When you refer to negative pressure environment and changing professions, am I correct in assuming you're alluding to the cost of creating one? My key concern is evacuating fumes/mist/overspray s quickly as possible. I've read about explosions associated with drawing air over an unenclosed motor - such as the box fan - yet everyone I've talk to that's done similar painting etc thinks it's exceedingly unlikely. I theorize that if I can evacuate quickly and bring in as little contamination (dust), I'll be safe and better off generally. Or...you'll read about it in the news. 😈
Sort of, tongue and cheek. With that expense and effort, you'd be well positioned to at least sideline. Really, once done, how many vehicles would you personally need to paint? Make money from a hobby.Originally Posted by 06YarisRS ↑When you refer to negative pressure environment and changing professions, am I correct in assuming you're alluding to the cost of creating one?
Sent from my Elite_5_5_Octa using Tapatalk
Yes, the thought of a few jobs here and there sounds appealing. A budget paint job with no guarantees for locals; word of mouth. Always the understanding that one should not expect a high quality job. At least in the early stages.
I started a post called "Paint Booth For Full Respray" in the General discussion forum.