PinchliteOriginal postBarrie Canada · Nov 23, 2017#1Replies 13
ACKING_QCQC, Canada · Nov 23, 2017#2interesting! keeping a note on that site
06YarisRSFredericton, New Brunswick, Canada · Nov 23, 2017#3They look great! Is the 2K gloss you used SprayMax 2K clear?
Why not imbed your images? That would save people having to open new tabs.
kimonaHuntington Bch, CA · Nov 23, 2017#4You've done a great job.
Not a fan of a rear Netz badge, but if you're happy with it, then that's all that matters.
PinchliteThread starterBarrie Canada · Nov 24, 2017#5 Originally Posted by
06YarisRS ↑ They look great! Is the 2K gloss you used SprayMax 2K clear?
Why not imbed your images? That would save people having to open new tabs.
Black base with spraynax 2K clear.
This stuff is just 2 stage paint in a can and works awesomely.
Great wide spray pattern and just right amount of pressure.
I will try and imbed images.Gotten used to thumbnail zoom plus(Firefox)Just hover cursor over any image link and it shows image automatically.
PinchliteThread starterBarrie Canada · Nov 24, 2017#6 Originally Posted by
ACKING_QC ↑ interesting! keeping a note on that site
They are phenominal quality,just like the original stocks.
PinchliteThread starterBarrie Canada · Nov 24, 2017#7 Originally Posted by
kimona ↑ You've done a great job.
Not a fan of a rear Netz badge, but if you're happy with it, then that's all that matters.
I thought it would be odd/silly to just go front.Besides I really like the look of the emblem design.Not many people see this symbol very often,if ever?
P.S
I am aware that the netz dealership only did the front emblem and left the sombraro on the back....I think?
kimonaHuntington Bch, CA · Nov 24, 2017#8 Originally Posted by
Pinchlite ↑ ... I really like the look of the emblem design.Not many people see this symbol very often,if ever?
In that case, why not install the VITZ nameplate?
PinchliteThread starterBarrie Canada · Nov 24, 2017#9I was actually thinking of that,painted black of course. left side may be a good location?
I could also remove the RS and place it there?
From what I gather the vitz does,and never did exsist within Canada.
Vitz is just another name for the echo/yaris in Japan?
PinchliteThread starterBarrie Canada · Nov 24, 2017#10 Originally Posted by
06YarisRS ↑ They look great! Is the 2K gloss you used SprayMax 2K clear?
Why not imbed your images? That would save people having to open new tabs.
I tried but this site does not autoresize.Therefore I will not imbed images.
As you can see i tried and the image is way too big.I personally dont resize my original images and leave full high res.
I post to reddit quite alot and use imgur.Reddit has no issue with largr images and resizes accordingly.
kimonaHuntington Bch, CA · Nov 24, 2017#11My 2007 rebadged Vitz RS. (The RS emblem lost it's red insert shortly before I sold the car).
1 attachment not included in this copy
kimonaHuntington Bch, CA · Nov 24, 2017#1206YarisRSFredericton, New Brunswick, Canada · Nov 26, 2017#13 Originally Posted by
Pinchlite ↑ Black base with spraynax 2K clear.
This stuff is just 2 stage paint in a can and works awesomely.
Great wide spray pattern and just right amount of pressure.
I will try and imbed images.Gotten used to thumbnail zoom plus(Firefox)Just hover cursor over any image link and it shows image automatically.
Yeah, I've used the SprayMax 2K clear on a set of alloys I restored for my Sedona. The stuff has been peeling off. I'm pretty sure that I waited too long to apply it over the metallic laquer. I've read great things about it and will likely try it again.
PinchliteThread starterBarrie Canada · Nov 27, 2017#14 Originally Posted by
06YarisRS ↑ Yeah, I've used the SprayMax 2K clear on a set of alloys I restored for my Sedona. The stuff has been peeling off. I'm pretty sure that I waited too long to apply it over the metallic laquer. I've read great things about it and will likely try it again.
I used/use PPG acrylic base and clear 15 mins after base.