Originally Posted by
tmontague ↑ ouch, I wouldn't want to do that job with bolts that have snapped. If they are in good shape it's a breeze.
This is why I pulled my manifold and applied anti seize to the bolts back when I had my 1nz and I did the same to my 2zr when it was out of the car. Saves my ass down the road when and if I ever need to remove the manifold.
That sounds like a very smart move. Not sure that the tech did the antiseeze application.
I can tell you that he had to do a lot of extra exhaust work. There were two sections of pipe that he replaced by cutting and welding in tubing. He basically replaced long sections before and after the cat. He had to weld in a bung port for the downstream O2 sensor, which also needs replacing. I used my Torque to check the O2 sensor voltage - Bank 1 Sensor 2 = 0 volts. I ordered one from eBay and will install that next week. On the plus side, the upstream 02 sensor is showing appropriate voltages and the AFR commanded and measured are in sync.
After the job, we discovered yet another leak in the section just forward of the muffler pipe at a hanger. He offered to repair that free and will do it next week. I can order a weld in pipe section from Rock Auto for $55.00 CAD delivered, so will probably go that route and have him install that.
I think the exhaust is all original and I'm surprised that there is as much left of it as there is given it's a 2006 and winter here is h*ll on cars with all the salt and crap on the roads.
The whole job cost me $580.00 (the only repair I've actually had to pay labour charges for) and he did a lot of fabricating and also completely undercoated my car too. I had done a lot of rustproofing already - atf in rockers, panels, doglegs, hatch, doors, hood, engine bay etc and I'd sprayed the underbody, but he added a ton of really nice "homebrewed" rustproofing (a combination of white grease (which he has in 5 gallon pails mixed with atf and a thinner of some kind). It's very nice gooey stuff that doesn't drip.
I'm pleased with his work and given the time to do the jiob, also pleased with the bill.
I'd say my little Yaris is about 95% finished...Getting there!
Probably the last job I'm going to get done is the installation of a keyless entry system. I've been quoted $200.00 taxes in from an aquaintance that has his own car electronics installation business.