Yarisworld Archive

VITZ NCP91 RS MAF HELP

8 posts · 3,405 views

JRHPNGOriginal postFrom NZ, currently working in Papua New Guinea · Sep 20, 2017#1
Hi,

I am building up my own intake and have found this pipe online made by Simota.

As my car is still in transit, I am gathering bits and pieces now, otherwise I would simply measure it myself.

Can anyone assist me with the measurements that they show so I know the MAF will fit into this?

Thanks in advance!

1 attachment not included in this copy

Replies 7

WeeYariGeorgetown, Ontario, Canada · Sep 20, 2017#2
Measure your own MAF. Would take you about as long to do as it took you to make this thread.

Sent from my Elite_5_5_Octa using Tapatalk
JRHPNGThread starterFrom NZ, currently working in Papua New Guinea · Sep 20, 2017#3
Originally Posted by WeeYari ↑
Measure your own MAF. Would take you about as long to do as it took you to make this thread.

Sent from my Elite_5_5_Octa using Tapatalk
Original post edited.
JRHPNGThread starterFrom NZ, currently working in Papua New Guinea · Sep 20, 2017#4
Originally Posted by WeeYari ↑
Measure your own MAF. Would take you about as long to do as it took you to make this thread.

Sent from my Elite_5_5_Octa using Tapatalk
** Comment removed
SirDigbyDenver, Colorado · Sep 20, 2017#5
ha!
Bluevitz-rsOshawa, Ontario, Canada · Sep 20, 2017#6
Originally Posted by JRHPNG ↑
Dick
Here in Canada it's pronounced "Richard"
WeeYariGeorgetown, Ontario, Canada · Sep 21, 2017#7
Originally Posted by JRHPNG ↑
King Richard (Dick)
I shouldn't even bother but since I am not a Dick, the critical measurements of 55 and 30 are correct. At least for a North American market Gen2 they are. No reason to believe yours would be any different.

Peace Out!

(for anyone late to the thread reading this, the original post had been subsequently edited to indicate that the vehicle is in transit)

Sent from my Elite_5_5_Octa using Tapatalk
JRHPNGThread starterFrom NZ, currently working in Papua New Guinea · Sep 21, 2017#8
Originally Posted by WeeYari ↑
I shouldn't even bother but since I am not a Dick, the critical measurements of 55 and 30 are correct. At least for a North American market Gen2 they are. No reason to believe yours would be any different.

Peace Out!

(for anyone late to the thread reading this, the original post had been subsequently edited to indicate that the vehicle is in transit)

Sent from my Elite_5_5_Octa using Tapatalk
Was my fault for not clarifying in the original post - I greatly appreciate your response. Thanks,