Yarisworld Archive

Cam, dyno and tune = problem

10 posts · 8,854 views

rabbitoOriginal postThailand · Sep 2, 2017#1
installed pair of 264 9.5 cams, same as JUN regular series(not bolt on)..
i thought 250cc was enough with these cams...my fuels was done before hitting high rpm or during the tune...fucken sucks(sorry for the language)...so we stopped the dyno for now until i upgrade them to larger injectors 330cc and above...sigh Picture not included in this copyPicture not included in this copyPicture not included in this copy
yes injector cc do gets maxed out....
you can see the dots going up and down unevenly after 5500rpm...
they said im not using full potential of the cams at all due to low fuel injection so until next time........

- i remember stock 1nz injectors were 160cc? correct me if im wrong...
- i remember stock 1nz yaris produce 81 or 82whp on dyno...
- todays weather: almost 40c..104 degrees...hot af with heavy humidity here in thailand
- current outcome on dyno is 103whp thats only 140hp...Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy

Sent from my SM-N920C using Tapatalk

Replies 9

Bluevitz-rsOshawa, Ontario, Canada · Sep 2, 2017#2
stock injectors are 190cc.
xnamerxxso cal · Sep 2, 2017#3
Something is off here, my stock injectors maxed out at a much higher hp than yours. I'm not going to give out numbers but I was making at least 30% more power than you on the stock injectors with no issues, it also looks like VVT isn't working on your car which will cost you about 20lb\ft of torque below 5k. Rather than fight with the emanage ultimate it would be easier to pickup a EMS4 and use that since it'll be less problematic and you won't have to fight with the ECU tuning you out.
Bluevitz-rsOshawa, Ontario, Canada · Sep 2, 2017#4
Originally Posted by xnamerxx ↑
Something is off here, my stock injectors maxed out at a much higher hp than yours. I'm not going to give out numbers but I was making at least 30% more power than you on the stock injectors with no issues, it also looks like VVT isn't working on your car which will cost you about 20lb\ft of torque below 5k. Rather than fight with the emanage ultimate it would be easier to pickup a EMS4 and use that since it'll be less problematic and you won't have to fight with the ECU tuning you out.
You running E85 too?
xnamerxxso cal · Sep 2, 2017#5
Originally Posted by Bluevitz-rs ↑
You running E85 too?
Nope 100 oct race fuel
Bluevitz-rsOshawa, Ontario, Canada · Sep 2, 2017#6
Originally Posted by xnamerxx ↑
Nope 100 oct race fuel
E85 requires an A/F of around 9:1 I think so that's why he's running out of injector long before you on regular 100% gasoline.
rabbitoThread starterThailand · Sep 2, 2017#7
i am running E85....i think im going to change the vvti solenoid back to stock...i feel like something isnt right

Sent from my SM-N920C using Tapatalk
rabbitoThread starterThailand · Sep 2, 2017#8
Originally Posted by Bluevitz-rs ↑
You running E85 too?
the dude with same cam as mine with standalone ecu, 1zz intake manifold conversion with 60mm throttle body woth custom intake(box) and exhaust job makes 130whp on the dyno...if you said your making 30% more than i do(which is about 130whp) with stock injectors, just a cam and ecu? thats too much of a magic number..correct me if im wrong please...
i am going to check some stuff out

Sent from my SM-N920C using Tapatalk
xnamerxxso cal · Sep 2, 2017#9
Well I'm making more than that, but I'm on the stock intake and stock throttle body, but I do have a header, cams, 11:1 compression, and some other internal magic. I would probably make quite a bit more power if I was allowed to run a bigger intake or throttle body as I'm developing about 3" of vacuum at 8k where the intake is basically acting as a restrictor.
rabbitoThread starterThailand · Sep 2, 2017#10
the cars running pretty lean...a lot of air and less fuel (from the gauge)
or it is maybe its hot af here? anyways ill get 330c injectors(E85), regulators and redyno...give me about a week or two

Sent from my SM-N920C using Tapatalk