Yarisworld Archive

Retrofit a OEM Garage door opener from Toyota

11 posts · 8,532 views

GibbsYaris07Original postCharlotte, NC · Aug 29, 2017#1
Anyone done this; retrofit another Toyota/Lexus built in garage door opener into their Yaris?

Replies 10

weevilAustralia · Sep 2, 2017#2
I retrofitted our generic garage door opener into my Yaris. $20 on a momentary switch and two tiny dabs of solder. Very easy, looks and works great.
GibbsYaris07Thread starterCharlotte, NC · Sep 6, 2017#3
Originally Posted by weevil ↑
I retrofitted our generic garage door opener into my Yaris. $20 on a momentary switch and two tiny dabs of solder. Very easy, looks and works great.
If you could, please share pics. What about Homelink?
weevilAustralia · Sep 6, 2017#4
Same principal as this:

https://www.youtube.com/watch?v=ieyPtIhuezQ

But my garage door opener had a hole I could put the wires through so no need for an extra box. I also did not use a multimeter. I just experimented touching the wires on the connectors and pressing the button until I found the ones that worked (very easy).
And instead of drilling holes I just bought one of the below on eBay.

http://www.aironboard.com.au/store/p...momentary.html

Even connected the switch’s light to the car power so it lights up when keys are in the ignition.

Don’t know anything about homelink but it should work with any door opener.

Works perfectly and looks 100% like it’s a standard part of the car.
govtecPhila, PA · Sep 8, 2017#5
I did it over the weekend when I installed the Scion stereo conversion. I installed the auto dim mirror along with garage opener. I got the mirror off of eBay. You only need to connect 3 wires (acc, 12v constant, ground). I ran the wires through the A pillar. Have a look...

1 attachment not included in this copy

GibbsYaris07Thread starterCharlotte, NC · Sep 8, 2017#6
Originally Posted by govtec ↑
I did it over the weekend when I installed the Scion stereo conversion. I installed the auto dim mirror along with garage opener. I got the mirror off of eBay. You only need to connect 3 wires (acc, 12v constant, ground). I ran the wires through the A pillar. Have a look...
nice job. This is what I was referring to initially.
govtecPhila, PA · Sep 8, 2017#7
Only cost $75 bucks from eBay and the mirror bracket is plug and play. The mirror is made by Gentex
GibbsYaris07Thread starterCharlotte, NC · Sep 11, 2017#8
Originally Posted by govtec ↑
Only cost $75 bucks from eBay and the mirror bracket is plug and play. The mirror is made by Gentex
What did you use for ACC and constant power? This is a good effective mod btw.
hotracer_05Rowlett, TX · Sep 11, 2017#9
Originally Posted by govtec ↑
I did it over the weekend when I installed the Scion stereo conversion. I installed the auto dim mirror along with garage opener. I got the mirror off of eBay. You only need to connect 3 wires (acc, 12v constant, ground). I ran the wires through the A pillar. Have a look...
What is the part number on that mirror?
govtecPhila, PA · Sep 11, 2017#10
I used the wiring instructions from Toyota that I found on another post. Basically run the wires down the A pillar and tap the side mirror control plug. See attached instructions. I connected both power wires in the mirror to ACC. Didn't have a need for 12V constant as I don't plan on using the garage door opener when the car is not on.

1 attachment not included in this copy

FertedColorado · Nov 19, 2021#11
Is it possible to install buttons to open the gate in the car?