Yarisworld Archive

5 Lug Conversion

61 posts · 34,350 views · page 2 of 2

Replies continued

DarkShadowFoxThread starterMassachusetts · Sep 25, 2017#51
Originally Posted by enviri ↑
yes the parts numbers i pullled are from the ncp131 RS G's version on my EPC, as in the pics pulled from a GRMN 5sp
built from 13-09 to 14-02.
since it does share parts from an urban cruiser (front) and similarities with our rear axles ncp91 is also included. lol.

the rear brakes is up to you.

you wanna stick with drum? try for the XD's drum setup. It will more than likely work. I would just take the XD's hub then instead of importing a hub with numbers above. The ncp131 and ncp91 share the same 4lug hub part number, and the ncp91 with the scion xd share the same rear axle beam, therefore the xd's 5lug rear will fit.

Using the XD's hub versus importing one with the part number in above post is a mystery. The RS/SE 4 lug rear hub is indeed shared with drum and disc equipped cars...

if you wanna use disc/caliper, go ahead and take it from a yaris SE and rotors from a set of toyotas including the GRMN vitz (toyota 42431-12310, centric 120.44165). All lines and misc crap are from yaris SE.

You might as well do a beam swap, or fabricate a hub adapter to hold the caliper.
now to save up hundreds of dollars ow o

Sent from my LG-H918 using Tapatalk
enviriCT · Sep 25, 2017#52
Theres a junkers in meriden, ct that has a scion xd to part out. I've dealt with them before. The guy behind the counter is so lazy he tells me to just dismantle the car myself for the part i need! Thats the best.
DarkShadowFoxThread starterMassachusetts · Sep 25, 2017#53
Originally Posted by enviri ↑
Theres a junkers in meriden, ct that has a scion xd to part out. I've dealt with them before. The guy behind the counter is so lazy he tells me to just dismantle the car myself for the part i need! Thats the best.
id rather buy new hubs from amazon.

Sent from my LG-H918 using Tapatalk
enviriCT · Sep 25, 2017#54
oh right front discs you got 3 caliper solutions.

-Stock SE (recommended)
-Corolla/matrix/Scion XD
-GRMN 4 pot (668$+shipping per caliper last i checked)

Picture not included in this copy
Picture not included in this copy
DarkShadowFoxThread starterMassachusetts · Sep 25, 2017#55
Originally Posted by enviri ↑
oh right front discs you got 3 caliper solutions.

-Stock SE (recommended)
-Corolla/matrix/Scion XD
-GRMN 4 pot (668$+shipping per caliper last i checked)

Picture not included in this copy
part #s?

Sent from my LG-H918 using Tapatalk
enviriCT · Sep 25, 2017#56
caliper:

RS/SE: 47730-52211, 47750-52211
corolla family: 47730-12a10, 47750-12a10
GRMN: 47730-52310, 47750-52350

Pad:

RS/SE: 04465-52310 (shims 04945-52120)
G's: 04465-WY010 or Pitwork brand: AY040TY079 (shims 04945-52120)
corolla family: 04465-02220(shims 04945-12111)
GRMN: 04465-52330 (shims 04945-52190)
DarkShadowFoxThread starterMassachusetts · Sep 25, 2017#57
Originally Posted by enviri ↑
caliper:

RS/SE: 47730-52211, 47750-52211
corolla family: 47730-12a10, 47750-12a10
GRMN: 47730-52310, 47750-52350

Pad:

RS/SE: 04465-52310 (shims 04945-52120)
G's: 04465-WY010 or Pitwork brand: AY040TY079 (shims 04945-52120)
corolla family: 04465-02220(shims 04945-12111)
GRMN: 04465-52330 (shims 04945-52190)
how about the rears :D?

Sent from my LG-H918 using Tapatalk
enviriCT · Sep 25, 2017#58
rears:

drum: scion xd. look it up. too many pieces. junkyard it, then get new shoes (04495-52120) and drum(42431-52110).

edit: here's the whole laundry list for Scion XD rear drums sift thru it yourself lol-
KEEP IN MIND THIS IS ASSUMING EVERYONE HAS ABS EQUIPPED.

*********************
04474 CYLINDER KIT, REAR WHEEL
04474-52140 2 $41.04
04495 SHOE KIT, REAR BRAKE
04495-52120 MARK NBK LN521 1 $75.88
04906 CUP KIT, REAR WHEEL CYLINDER
04906-28040 1 $20.26
04941 SPRING KIT, REAR BRAKE SHOE HOLD DOWN
04941-28010 1 $43.21
04942 SPRING KIT, REAR BRAKE
04942-13030 1 $47.80
04943A STRUT KIT, REAR BRAKE
04943-52030 1 $57.37
04949 PLUG KIT, REAR BRAKE
04949-13010 1 $18.66
47043 PLATE SUB-ASSY, BRAKE BACKING, REAR RH
47043-52120 1 $65.39
47044 PLATE SUB-ASSY, BRAKE BACKING, REAR LH
47044-52120 1 $65.39
47547R PLUG, BLEEDER(FOR DRUM BRAKE, REAR)
47547-27030 4 $4.67
47548R CAP, BLEEDER PLUG(FOR DRUM BRAKE, REAR)
31478-30010 4 $2.21
47550 CYLINDER ASSY, REAR WHEEL BRAKE(FOR RH, FRONT OR UPPER)
47550-28060 1 $79.58
47550C SPRING, COMPRESSION(FOR REAR WHEEL BRAKE CYLINDER)
Not applicable
47570 CYLINDER ASSY, REAR WHEEL BRAKE(FOR LH, FRONT OR UPPER)
47550-28060 1 $79.58
47601 LEVER SUB-ASSY, PARKING BRAKE SHOE, RH(FOR REAR BRAKE)
47601-12480 1 $8.62
47602 LEVER SUB-ASSY, PARKING BRAKE SHOE, LH (FOR REAR BRAKE)
47602-12480 1 $8.62
47643A LEVER, REAR BRAKE AUTOMATIC ADJUST, RH
47643-52120 1 $4.94
47644A LEVER, REAR BRAKE AUTOMATIC ADJUST, LH
47644-52120 1 $4.94
90119-06084 *** STD. PART $1.34

**********************************

REAR DISCS

SE/RS/G's/GRMN caliper: 47830-52161, 47850-52161
SE/RS pads: 04466-52140 or 04466-52141
G's/GRMN pads: 04466-WY010 or Pitwork - AY060TY027

Shims: 04946-52080

dust cover, rear: 47803-52030, 47804-52030
caliper carrier: 57821-12151
brake pad fitting kit: 04948-52040, 04948-12060
rear axle beam: 42101-52160 or build an adapter yourself.
DarkShadowFoxThread starterMassachusetts · May 18, 2018#59
rotors are corolla, hubs are XD.

I cant tell if the brakes are MATRIX or tundra. as the rotors are like 706 a piece and i want to know what they repurposed them from.

https://car.watch.impress.co.jp/img/...N_018.jpg.html

have the handle on the parts finally and someone to fund me so i can move to up 5 lug. wont be using RF507 unless someone can gift them to me.
DarkShadowFoxThread starterMassachusetts · May 18, 2018#60
on the NEW GRMN brakes are made by ADVICS and they look like landcruiser brakes or any large brake as i cant find any 4 anything besides that.
DarkShadowFoxThread starterMassachusetts · May 18, 2018#61
so we said the brake caliper is 47730 for gEMN while the 2007 caliper for landcruiser is

47730-60090

would it fit. looks eerlier similar.