Yarisworld Archive

Supercharged 07 HB 5 spd bayou bleu

27 posts · 9,885 views

Innovative 1Original postGlendive, MT · Jul 20, 2017#1
I've decided to sell my 07 HB 5 spd with Power Enterprise supercharger and lots of other mods. Here is a pretty much full list of what I've done to her and it's current condition.
2007 Yaris (of course) 2 door HB 5spd
125xxx (still commute with it to work so miles will increase a little)
Bought with 64xxx miles on it. Only thing aftermarket on it at time of purchase was a set of velocity wheels. Have studded snow tires (Cooper's) on stock steelies.
I have a brand new set of Goodyear v-rated rsa's going to mount shortly.
My mods I've done (90% of which was done around 88xxx miles:
Rotella T6 used since day one of purchase (actual first mod)
Power Enterprise's supercharger kit w/intercooler
NST crank pulley real sensitive when cranking over to start with PE set up (have stock pulley if wanted)
TRD sport shocks and struts
TRD rear sway bar
Cusco sub frame brace
Canadian gauge cluster with tach (in mph)
Entire car was repainted after a deer ran into the passenger side on way to work one morning (not a bad hit a all)(I've got pics if you want to see it)
A VIS vitz rs fiberglass front bumper as well as a Kaminari fiberglass cowl hood with custom paint
I still have the stock bumper and hood if wanted.
TRD badges front and rear
Short throw shift kit
Extended shift shaft with ball grip
Wpn R header
TRD muffler with stainless steel tip
Vitz rs LED tail lights (OEM from Japan)
Rear spoiler
Tinted windows (all except windshield)
Focal 4 channel amp
6.5 focals in front door with remote tweeters in trim next to small front window on both doors (with crossovers)
Can't remember what I've got in the back for speakers.
I'll look when I get a chance
AVH-X4800BS head unit
No sub in it but can easily be added
Sound deadened the entire floor side panels etc.
I pride myself on a nice clean install on sound system so don't worry about that.
Block heater
Perrin antenna
Vertically positioned rear wiper
Prius wiper stalk with intermittent function
Oem cruise control installed
Mounted 2 switches in driver side door panel for left and right garage doors
Weather tech front floor mats
Hella hi and low tone horn mod
Toyota Engine block heater
***Only real issue it has (purely cosmetic) is the front VIS bumper. The body shop I used in town didn't really prep it well enough and it has chips in it. Some big, some small. Can be redone by a body shop that knows how to properly prep and paint fiberglass. The very bottom of it has a split in it that can also be repaired. I have to replace the fog lights. The glass on both are both shattered. The hood is fine just the bumper will need work on it.***

As far as utilizing the full power of the PE unit a light weight flywheel and performance clutch and lsd (as you might already know would make this car a hell of a lot quicker and more responsive.
Mounted and hooked up a boost gauge but with intercooler installed I think it was messing with it so I disconnected it and it just sits there for looks.

Sorry I don't have pics of current condition yet. I have to clean it up and will get some posted soon.
Rock bottom lowered price
$5500.00

Replies 26

WeeYariGeorgetown, Ontario, Canada · Jul 20, 2017#2
That's where the PE s/c went!

GLWS

Sent from my Elite_5_5_Octa using Tapatalk
Innovative 1Thread starterGlendive, MT · Jul 20, 2017#3
I bought it brand new from Japan. You talking about a used one?
SirDigbyDenver, Colorado · Jul 20, 2017#4
did they do a top mount IC with their kit?
what do you use for engine management?
Innovative 1Thread starterGlendive, MT · Jul 20, 2017#5
I mounted it behind the lower mesh grill. Engine management provided from PE with kit. It's there PCON piggy back computer. I did all the install of supercharger kit myself. Was a certified Audi tech for 5 years mechanic since I can't remember.

1 attachment not included in this copy

Innovative 1Thread starterGlendive, MT · Jul 20, 2017#6
Right after I got it out of body shop. Put stock headlights back on. Barn owl took out the ones in these pics. Stock ones much stronger anyways.

1 attachment not included in this copy

MugenRepCentral Pennsylvania · Jul 21, 2017#7
Do you have any videos of it driving and running? I'd love to see how it performs as well as well as know how reliable and drivable it is.
Innovative 1Thread starterGlendive, MT · Jul 21, 2017#8
I can try to make one if you want. I can honestly say that the addition of the supercharger was a night and day difference. It gets better fuel mileage and pulls up hills no problem not even having to drop down into 4th like when it was stock. Even with a/c running.
With the TRD sportivo shocks, struts and rear sway it handles like it's on rails. Made a considerable difference in road manners. No kidding. I use it for commuting so haven't thrashed on it like say auto cross or anything.
Replaced battery last year. Like I said in desription I have 4 brand new Goodyear rsa's going on it soon.
I'd drive it the way it is right now cross country with no hesitation. Drove it last summer to pick up my son from eastern Montana to Chattanooga Tennessee and back and spent $150 on fuel. That's doing 80 90% of the trip. Not to shabby in my honest opinion.
Also I have the stock suspension for it in case someone wants to put it back on for like winter or whatever. I have the stock hood and bumper as well as the engine components if wanted a stock setup. IMHO the car is much more fun to drive the way it is. But to each their own.
SirDigbyDenver, Colorado · Jul 21, 2017#9
you did not mention the rear disks in your ad. your plumbing looks confusing. i wonder why they clock the SC the same in the IC as in the non-IC. they must buy them in bulk. Rotrex will downdraft the compressor housing and clock it in any direction. do you have some pictures of the engine bay?
Innovative 1Thread starterGlendive, MT · Jul 24, 2017#10
Some pics of routing of plumbing for my setup

5 attachments not included in this copy

MugenRepCentral Pennsylvania · Jul 25, 2017#11
Awesome pics and can't wait to see the vid. I bet this pulls like a beast!
SirDigbyDenver, Colorado · Jul 25, 2017#12
wait, wait, wait! is the innercooler plumbed as a pre-cooler??? who designed that?! the purpose of the innercooler is to cool the air and create a more dense charge after it's been heated from being compressed in the supercharger. if you cool the air before it enters the supercharger it will produce a more dense charge going in to the compressor, but not half as much as after the compressor. if you reclock the compressor so the output goes down to the cooler then out to the manifold, not only will it make accessing the spark plugs and top of the engine much easier, but i bet you pick up at least 10hp
just my opinion.
i'm trying to find the money so i can purchase it. i'd love to have it!
thebarberGrand Rapids, MI · Jul 26, 2017#13
Ever dyno?
Innovative 1Thread starterGlendive, MT · Jul 31, 2017#14
Makes sense to route it that way. And would probably pick up more hp. Sure it could be routed that way. It definitely pulls a heck of a lot more than a stock 1.5L. With a better clutch and flywheel and possible LSD (which is available (TRD) through Toyota) it would grab, pull and utilize the power it has.
Never had chance to Dyno. Wanted to install better clutch etc. before I did. Stock clutch is still good but I think setup is almost to much for clutch flywheel etc.
Innovative 1Thread starterGlendive, MT · Aug 2, 2017#15
Your from Denver SirDigby? That's where I originally bought it in.
Innovative 1Thread starterGlendive, MT · Aug 2, 2017#16
This is Yarisworld right? Can't believe more people are not jumping on this car! Opened to offers but please don't be insulting.
SirDigbyDenver, Colorado · Aug 2, 2017#17
sweet. there are quite a few around here...
Innovative 1Thread starterGlendive, MT · Aug 3, 2017#18
Oh yeah. It has a 1zz throttle body to. Forgot about that mod.
MugenRepCentral Pennsylvania · Aug 4, 2017#19
You gotta get a vid up of the engine running and powerband or something. That'd help a FS ad immensely!
Innovative 1Thread starterGlendive, MT · Aug 7, 2017#20
Anyone want to make an offer?
SirDigbyDenver, Colorado · Aug 8, 2017#21
i can't do it. my offer would be insulting...
MugenRepCentral Pennsylvania · Aug 9, 2017#22
Some good vids would help! We'd all love to see what she can do and I know for a fact it'd help. I'd be willing to host and load them up if they were sent to me.
Innovative 1Thread starterGlendive, MT · Aug 9, 2017#23
If you want PM the offer you would think would be insulting SirDigby. The worst I'll tell you is your out of your mind.
Innovative 1Thread starterGlendive, MT · Aug 16, 2017#24
Lowered my asking price to $5500.00. Anything lower I'd just keep it on principal alone.
07liftbackBay Area · Aug 16, 2017#25
Originally Posted by SirDigby ↑
i can't do it. my offer would be insulting...
You and me both 🤣🤣🤣

In all honesty, if you were closer to me, I'd definitely want to check it out. Need to get rid of two other cars before committing though.
Innovative 1Thread starterGlendive, MT · Aug 18, 2017#26
Considering parting out and returning car to stock.
Innovative 1Thread starterGlendive, MT · Aug 18, 2017#27
I've decided to return the car to stock and part out performance goodies etc. I will post a new thread on parts for sale forum once I go through and itemize everything I've got.