Yarisworld Archive

Where are you mounting your AEM FI/C ??

16 posts · 11,546 views

malibuguyOriginal postWestminster, MD · Jul 8, 2017#1
The boomslang harness is not very long...are you pretty much stuck with mounting the AEM on top of the factory ecu?

Replies 15

SirDigbyDenver, Colorado · Jul 9, 2017#2
in the trash can!
j/k
i'd go with the infinity, mounted in the stock ECU location; when i add the turbocharger.
malibuguyThread starterWestminster, MD · Jul 9, 2017#3
Im glad you have the money to drop on an Infinity.

Plus it will not pass OBD2
SirDigbyDenver, Colorado · Jul 10, 2017#4
why would it not pass?
i figure if i'm spending $3000 on an upgrade, i should spend the $2500 to make it run correctly. this is just my opinion. i believe you do things right, or you don't do them at all.
tmontagueCaledonia Ont. · Jul 10, 2017#5
Originally Posted by SirDigby ↑
why would it not pass?
assuming the infinity is a standalone, most etests now use the obdII port to check for engine readiness. standalone=no obdII=etest fail

This is the biggest obstacle for us wanting to go boosted on a yaris who have to pass e tests. (another big reason I chose to do a 2zr swap)
SirDigbyDenver, Colorado · Jul 11, 2017#6
yeah i'm checking on that now. i thought the infinity had obd output....
malibuguyThread starterWestminster, MD · Jul 11, 2017#7
Where are you getting 3000 for an upgrade?

Beauty of being a fabricator and getting parts at the right time for a good price. Ill be spending probably more getting the car tuned then actual money in the parts of the build.

6 years in the making not in any particular rush
malibuguyThread starterWestminster, MD · Jul 11, 2017#8
The intercooler core was the most expensive part and I got it below retail :p

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Jul 12, 2017#9
Originally Posted by SirDigby ↑
yeah i'm checking on that now. i thought the infinity had obd output....
Most stand alone ECUs do, but that doesn't make them emissions compliant. Non of them will control the charcoal canister or monitor catilytic efficiency.
SirDigbyDenver, Colorado · Jul 12, 2017#10
Originally Posted by Bluevitz-rs ↑
Most stand alone ECUs do, but that doesn't make them emissions compliant. Non of them will control the charcoal canister or monitor catilytic efficiency.
meh. i don't think they check that around here. the plug the car in and check readyness codes. it takes 10 seconds. then they test the fuel cap for integrity, it takes like 20 seconds....
SirDigbyDenver, Colorado · Jul 13, 2017#11
Originally Posted by malibuguy ↑
Where are you getting 3000 for an upgrade?

Beauty of being a fabricator and getting parts at the right time for a good price. Ill be spending probably more getting the car tuned then actual money in the parts of the build.

6 years in the making not in any particular rush
pistons= $600
connecting rods= $600
rings, pins, bearings, seals, crank balance, etc.= +$500
camshafts=+ $600
valves, retainers, springs, etc. (shims?)= +$500
head work= +30hrs.
block= $200(?)
total= $3000 + 30hrs. head work
then, i guess you need to purchase your turbocharger and the components for that.
turbocharger= $800 (a Good one)
intercooler= $200
plumbing (air)= $500 (+,++)
plumbing (oil)= $200 (+,++)
extras= $100 (+,++)
total=$1800 for turbocharger
(ECU= $2500)
oh, LSD=$1800
probably need the brake upgrade= $250
so, total=$9350
i guess my $3000 was way off. sorry, i'll pay more attention.
DarkShadowFoxMassachusetts · Sep 23, 2017#12
ive always wanted to put mine in the glovebox in a plexi illuminated case along with the factory ecu.

Sent from my LG-H918 using Tapatalk
hichamazizcasablanca · Feb 28, 2018#13
Im glad you have the money to drop on an Infinity.
malibuguyThread starterWestminster, MD · Feb 28, 2018#14
Originally Posted by SirDigby ↑
pistons= $600
connecting rods= $600
rings, pins, bearings, seals, crank balance, etc.= +$500
camshafts=+ $600
valves, retainers, springs, etc. (shims?)= +$500
head work= +30hrs.
block= $200(?)
total= $3000 + 30hrs. head work
then, i guess you need to purchase your turbocharger and the components for that.
turbocharger= $800 (a Good one)
intercooler= $200
plumbing (air)= $500 (+,++)
plumbing (oil)= $200 (+,++)
extras= $100 (+,++)
total=$1800 for turbocharger
(ECU= $2500)
oh, LSD=$1800
probably need the brake upgrade= $250
so, total=$9350
i guess my $3000 was way off. sorry, i'll pay more attention.
LOL
ArmstrongRacingSan Diego · Mar 9, 2018#15
I have the Camcon.....Yet its still in the box. I just don't trust any tuners, nor do I beleive a few more horsepower is worth the risk.

So I still run the factory ECM and an n/a engine :-|
tmontagueCaledonia Ont. · Mar 10, 2018#16
Originally Posted by ArmstrongRacing ↑
I have the Camcon.....Yet its still in the box. I just don't trust any tuners, nor do I beleive a few more horsepower is worth the risk.

So I still run the factory ECM and an n/a engine :-|
This is the thought that keeps me sticking with my factory ecu whenever my brain wanders into the realm of a piggyback. I don't plan on going boosted and realistically I don't want to fill up with premium since it my DD'er. In the end my net gain in hp would be virtually negligable, not worth the risk of a bad tune blowing the engine