Yarisworld Archive

Ralley Style LED Lights on Yaris

18 posts · 9,980 views

hotracer_05Original postRowlett, TX · Jun 22, 2017#1
Whats up guys! Didn't see too many posts about hooking some of these up, so decided to throw one out there in case anyone wants to do the same. For my Third Gen Yaris I really wanted to go with the ralley look, so I decided to add some LED lights and a Bumper Bar.

For the Bumper Mounted LEDs I went with this Universal License Plate Bumper Mount which can be found all over Ebay

Picture not included in this copy

Instead of just using the actual license plate bolts to mount it, I used the 4 corner holes of the bar plate and drilled corresponding holes to the bumper. Then add bolts with washers to make it more secure.

For the Hood Mounted LEDs I went with these Universal Hood Mounts, also found all over Ebay

Picture not included in this copy

I just used the actual mounting C clamps, I removed the Risers

To control the Lights I went with the ACC Trigger Control Module. What I really like about this module is that the switches it comes with are wireless, so no need to run a harness through the firewall

Picture not included in this copy
Picture not included in this copy

For the bumper lights I ran the wires through the grill. For the Hood lights I ran the cables in the hood hinges themselves so they stay tucked away with the hood closed.

Picture not included in this copy
Picture not included in this copy

And Ta Da! Final Product. This look is definitely not for everyone, but I drive through a lot of nothing sometimes and the extra lights help

Picture not included in this copy
Picture not included in this copy

Replies 17

ACKING_QCQC, Canada · Jun 22, 2017#2
I'm not a fan of hood lights... but you should've took some big ass round lights if you wanted a more rally style.. now it looks like you just installed Jeep lights on a Yaris XD
ccyarisPasadena · Jun 22, 2017#3
Nice, lots of lumens, definitely won't tax your electrical system. Osram LEDFOG201 are available to fill out the factory location with optional Toyota mounting brackets.
NYC-SENYC · Jun 22, 2017#4
Please don't drive behind me.
Dodge Aries KMachesney Park, IL · Jun 23, 2017#5
YES! This is awesome.
David CMontreal · Jun 23, 2017#6
Like ACKING said, round would have been even better looking, and I would have tons with a lower profile but wider spread hood lights (aero dynamics and less prone to get snag when cleaning). A rally style spoiler would look awesome on the car too.

All being said, I like your setup. The wireless switch box is neat and I think you'd done a great job thinking it all out. Thanks for sharing.
heeroyuy01195Florida · Jun 23, 2017#7
Glad someone finally did it, been wanting to see a Yaris setup with lights like this for a good while.
KCALB SIRAYVirginia · Jun 23, 2017#8
At first I was going to side with some of the folks here and lean on the "meh, no" side. BUT, it serves your purpose and it's your style and that's what makes you happy, I can dig that. I like it more and more each time I look at it. It's different and unique, and will light up a mastodon if and when you come across one crossing over the 635 👍.
kimonaHuntington Bch, CA · Jun 23, 2017#9
That universal bumper mount bracket is great!
DabuuNo Bueno Park, CA · Jun 23, 2017#10
Hell yes.
hotracer_05Thread starterRowlett, TX · Jun 23, 2017#11
Thanks for the feedback guys! I was thinking of doing round HIDs (I have 2 9" ones that will turn night into day), But I got these for pretty cheap and they are pretty light. I really want to add a spoiler, but cant find any for this bodystyle!!! All the ones ive seen are for 2nd gens
Alain93Florida · Jul 5, 2017#12
Cool!
Did you have to remove the bumper to install it?
hotracer_05Thread starterRowlett, TX · Jul 5, 2017#13
Originally Posted by Alain93 ↑
Cool!
Did you have to remove the bumper to install it?
I didn't, I removed the plastic skid plate and reached behind.
Alain93Florida · Jul 5, 2017#14
Originally Posted by hotracer_05 ↑
I didn't, I removed the plastic skid plate and reached behind.
Thanks
coolguyndcQuebec, Canada · Aug 12, 2017#15
I am doing my own bumper bracket using a aluminium L piece. Looks good so far. Did it because of your car :)
moyerhw23Virginia · Aug 13, 2017#16
Looks great, man


Sent from my iPhone using Tapatalk
hotracer_05Thread starterRowlett, TX · Aug 14, 2017#17
Originally Posted by coolguyndc ↑
I am doing my own bumper bracket using a aluminium L piece. Looks good so far. Did it because of your car :)


That's awesome! Post pics when it's done


Sent from my iPhone using Tapatalk
hotracer_05Thread starterRowlett, TX · Aug 14, 2017#18
Originally Posted by moyerhw23 ↑
Looks great, man


Sent from my iPhone using Tapatalk


Thanks!


Sent from my iPhone using Tapatalk