Yarisworld Archive

140.00 CAD reasonable for wheel bearing replacement?

15 posts · 8,590 views

PinchliteOriginal postBarrie Canada · May 23, 2017#1
I could probaly do myself as I did struts and rear drum brakes but it does look to be more involved from videos.

I already have the new bearing and the mechanic who used to do the work on this yaris says he will do for $140.00 CAD cash.

He did the drivers side just before I bought the car about 1 1/2 years ago.(I bought the car from my sister BTW)

Replies 14

tmontagueCaledonia Ont. · May 23, 2017#2
Ya that seems reasonable. I'm assuming you are talking about the front?

What bearing did you buy?
PinchliteThread starterBarrie Canada · May 23, 2017#3
Originally Posted by tmontague ↑
Ya that seems reasonable. I'm assuming you are talking about the front?

What bearing did you buy?
National bearing from Parts cource(78.00)

If I had access to garage I would maybe give it a go.

I have gravel driveway with out shelter.
tmontagueCaledonia Ont. · May 23, 2017#4
I'm not super familiar with National's quality and reliability of their bearings. Although for that price they better be good!
PinchliteThread starterBarrie Canada · May 23, 2017#5
Originally Posted by tmontague ↑
I'm not super familiar with National's quality and reliability of their bearings. Although for that price they better be good!
Quote from Volvo forum..

(National bearings should be pretty good. They are identical to Moog bearings, which in general is a reputable brand)

I know Timken are recommended but national was available locally.
tmontagueCaledonia Ont. · May 23, 2017#6
I have moog on my rears and they seem to have a good reputation so you should be good to go
Motzking1Renton, wa · May 25, 2017#7
National bearings are good stuff. It is likely a Timken bearing in a national box. National and Timken often buy and rebox from eachother. Either way it's good stuff. If it's a hub and bearing assembly it's not to bad to do. If it's just the bearing it requires a press or very precise beating with a big hammer on a solid concrete floor. If your working on gravel on your knees your better off paying the $140. IMO

Sent from my SAMSUNG-SM-N900A using Tapatalk
PinchliteThread starterBarrie Canada · May 25, 2017#8
Originally Posted by Motzking1 ↑
National bearings are good stuff. It is likely a Timken bearing in a national box. National and Timken often buy and rebox from eachother. Either way it's good stuff. If it's a hub and bearing assembly it's not to bad to do. If it's just the bearing it requires a press or very precise beating with a big hammer on a solid concrete floor. If your working on gravel on your knees your better off paying the $140. IMO

Sent from my SAMSUNG-SM-N900A using Tapatalk
Its just the bearing,and yes it is a bit more then I can do in the driveway.Also time constraints as with most of us life is busy.

Dont get me wrong I totally prefer DIY but sometimes you gotta get a pro to do the job for whatever reason it may be.
Motzking1Renton, wa · May 25, 2017#9
I have done one. There was a lot of beating and I ended up damaging the bearing and buying a second one. So in the end I saved $70 and it took me 3 hrs. With a the proper equipment (a press) it's an easy job. Without your beating the hell out of the hub and spindle and likely a finger! $140 is a good deal. Save your self the time and finger!

Sent from my SAMSUNG-SM-N900A using Tapatalk
PinchliteThread starterBarrie Canada · May 25, 2017#10
Originally Posted by Motzking1 ↑
I have done one. There was a lot of beating and I ended up damaging the bearing and buying a second one. So in the end I saved $70 and it took me 3 hrs. With a the proper equipment (a press) it's an easy job. Without your beating the hell out of the hub and spindle and likely a finger! $140 is a good deal. Save your self the time and finger!

Sent from my SAMSUNG-SM-N900A using Tapatalk
Will do and thanks.

He said 1 hour approx and I will be good to go.Getting it done sat morning.

This mechanic has worked on the car since it was new(after warranty)

I bought this yaris from my sister so i know its history and this mechanic seems like a really decent fella.
ex-x-fireSheboygan Falls, Wi. · May 25, 2017#11
Another option is you could remove the knuckle & take it to a machine shop, have them press it in & out.
PinchliteThread starterBarrie Canada · May 25, 2017#12
Originally Posted by ex-x-fire ↑
Another option is you could remove the knuckle & take it to a machine shop, have them press it in & out.
Could but gravel driveway no shelter,rain forcasted and need done ASAP.
Dodge Aries KMachesney Park, IL · May 25, 2017#13
It's worth the $140. These wheel bearings suck and if the 2nd gen Yaris is like the first gen (or in my case my Scion xA) that snap ring retaining clip is a horrible HORRIBLE thing that is pure evil.
jraIndiana · May 26, 2017#14
Don't sound like a bad price. You can do them yourself, but a lot of times axle will be frozen to the inside race and can be very hard to remove without damaging it,new bearings should be pressed in to prevent damage to them, could use a hydraulic press or maybe rent a bearing installation kit from someplace like Auto Zone? Kit would have tools needed to remove old bearings and install the new ones.
ex-x-fireSheboygan Falls, Wi. · May 27, 2017#15
Originally Posted by Pinchlite ↑
Could but gravel driveway no shelter,rain forcasted and need done ASAP.
That wouldn't stop me from doing it.