JustDidItOriginal postUnited States · Feb 4, 2017#1I posted this question in my own thread in the boosted section but didn't get any responses. So I thought I'd repost it here...
Anyone know the actual specs on the 1ZZFE injectors? I've heard an array of answers on the CC range.
Looking at these - both listed for the Toyota 1.8
23250-22040
Picture not included in this copy
vs
23250-0D050
Picture not included in this copy
Anyone know the difference? What are most people using when they are attempting to upgrade their current 1NZ injectors?
Replies 30
CrankyOldManWest Michigan · Feb 5, 2017#2Green:
Picture not included in this copy Blue:
https://monkeywrenchracing.com/produ...or-1-1zz-blue/ Not sure of the actual reason for different part numbers. Possibly spray pattern or internal resistance? Maybe just color coded to keep them separate on the production line?
FluxtasyMalaysia · Feb 6, 2017#3JustDidItThread starterUnited States · Feb 6, 2017#4 Originally Posted by
Fluxtasy ↑
Interesting.. Thx! Wonder if it really is just the spray pattern or the +5cc difference ? The green ones have more YW user reviews but this blue review intrigues me.
FluxtasyMalaysia · Feb 6, 2017#5 Originally Posted by
JustDidIt ↑ Interesting.. Thx! Wonder if it really is just the spray pattern or the +5cc difference ? The green ones have more YW user reviews but this blue review intrigues me.
oh yeah my orange injector has the same nozzle pattern as the blue ones. Possibly the cc are about the same too. My mechanic did mentioned that the cycle duty are probably different.
Bluevitz-rsOshawa, Ontario, Canada · Feb 6, 2017#6I needed this info too. Thanks for the info everyone. I'll make sure to look for the blue injectors then.
JustDidItThread starterUnited States · Feb 6, 2017#7David CMontreal · Feb 6, 2017#8Are the 1.8L injectors intended to be used in the Yaris 1.5L 1NZ engine ?
Envoyé de mon iPhone en utilisant Tapatalk
MugenRepCentral Pennsylvania · Feb 6, 2017#9Very nice info! Not sure how I missed this initially in either section. I'll be upgrading now that I have a path for a turbo on my 1NR-FE.
JustDidItThread starterUnited States · Feb 6, 2017#10 Originally Posted by
David C ↑ Are the 1.8L injectors intended to be used in the Yaris 1.5L 1NZ engine ?
Envoyé de mon iPhone en utilisant Tapatalk
Intended... no. But for boosted 1NZ applications and other performance modifications, the 1ZZ injectors have shown to help performance.
CrankyOldManWest Michigan · Feb 6, 2017#11 Originally Posted by
JustDidIt ↑ Intended... no. But for boosted 1NZ applications and other performance modifications, the 1ZZ injectors have shown to help performance.
I upgraded to the green 1ZZ injectors to keep from going lean with my Blitz supercharger. If you have a proper engine management system, you can just tune the fuel map to compensate. The Blitz comes with a really basic piggyback that just makes the ECU go into open loop mode, which just dumps a ton of fuel to ensure it's not running lean. Bigger injectors = more fuel = lower AFR under boost. Not terribly elegant, but safer than running lean and breaking things.
David CMontreal · Feb 6, 2017#12 Originally Posted by
JustDidIt ↑ Intended... no. But for boosted 1NZ applications and other performance modifications, the 1ZZ injectors have shown to help performance.
Thanks
Envoyé de mon iPhone en utilisant Tapatalk
Bluevitz-rsOshawa, Ontario, Canada · Feb 7, 2017#13Just as a reminder, what's the 1NZ injectors rated at for CCs so I can make the adjustment in the FIC?
JustDidItThread starterUnited States · Feb 7, 2017#14 Originally Posted by
Bluevitz-rs ↑ Just as a reminder, what's the 1NZ injectors rated at for CCs so I can make the adjustment in the FIC?
I don't have exact.. but I've read 200-210cc. It's the same part number for the 1NZFXE as it is for the 1NZFE
Bluevitz-rsOshawa, Ontario, Canada · Feb 9, 2017#15an interesting page I found regarding the flow rate and injector response time for the 1NZ injectors. Unfortunately they don't have the 1ZZ injectors listed.
Link JustDidItThread starterUnited States · Feb 9, 2017#16Nice -
1NZ: 200cc 19lb/hr 14ohm
Bluevitz-rsOshawa, Ontario, Canada · Feb 9, 2017#17I can't remember what I have my response time set to but I'm going to change it to about 500us. My idle seems seems to be very rich as my fuel trims are always very far into the negative area and it crank on cold starts longer than it should.
I'll report.back when I get around to it.
Bluevitz-rsOshawa, Ontario, Canada · Feb 9, 2017#18I don't know why but I had it set to 850us. That would explain the long cranking and poor throttle response when hot. Moved it to 526us. I'll have to check my fuel trims now. Did it just before rushing out to work.
JustDidItThread starterUnited States · Feb 9, 2017#19 Originally Posted by
Bluevitz-rs ↑ I don't know why but I had it set to 850us. That would explain the long cranking and poor throttle response when hot. Moved it to 526us. I'll have to check my fuel trims now. Did it just before rushing out to work.
Where and what are you using to adjust this?
Bluevitz-rsOshawa, Ontario, Canada · Feb 10, 2017#20 Originally Posted by
JustDidIt ↑ Where and what are you using to adjust this?
AEM FIC
FluxtasyMalaysia · Feb 21, 2017#21I've switched over to the 1NZ blue injectors a few months back and was running fine without issues.
I recently installed a used muffler and have been using it for over a month now. I did noticed a noise usually when RPM is below 2k. Could this noise be that the fuel mix is running lean? maybe the ignition timing advancing/retarding?
Strange that this noise did not occur till the muffler change. Any thoughts?
ncp13Athens Greece · Feb 21, 2017#22Could it be a bad mufler ?
Switch back and check😕
FluxtasyMalaysia · Feb 21, 2017#23lol I don't think it is the mufler. Could it be possibly a faulty injector? Is there anyway to check?
Bluevitz-rsOshawa, Ontario, Canada · Feb 21, 2017#24FluxtasyMalaysia · Feb 21, 2017#25 Originally Posted by
Bluevitz-rs ↑
but what if there are no signs of physical damage?
JustDidItThread starterUnited States · Feb 21, 2017#26Were they used and flow tested? .. or just used and not tested?
Bluevitz-rsOshawa, Ontario, Canada · Feb 21, 2017#27Used, not flow tested. They all work fine. If i started it and there was signs of misfire or hesitation I would have pulled them out again.
I did clean them with carb cleaner and compressed air before installing them.
JustDidItThread starterUnited States · Feb 21, 2017#28On my NHW20 Prius, supposedly if I put it in maintenance mode, the ecu can learn new fuel trim. I've never verified this...not sure if the 1NZFE cars have that capability... or it works if I swap injectors.
Bluevitz-rsOshawa, Ontario, Canada · Feb 22, 2017#29Yeah the ECU is continuously learning. Depending on what year the car is and what ECU it runs depends on how fast it learns and how much range of control it can compensate. Mine's an '05 and STFT can go + or - 20%. I think the newer cars have a bit more control than that.
ncp13Athens Greece · Mar 19, 2017#30@ fluxtasy
Did you check the solenoid resistance cold on the injector ? 14ohms cold if i remember correctly .
FluxtasyMalaysia · Mar 20, 2017#31 Originally Posted by
ncp13 ↑ @ fluxtasy
Did you check the solenoid resistance cold on the injector ? 14ohms cold if i remember correctly .
Actually I've just found out the culprit for the cause. Previously was using another brand of Ron 95 fuel and have now switched over to Caltex and no more knocking noise!
Unbelievable but that previous brand of fuel was superior to the others as they had the lowest sulfur content but now they have compromised quality for profits.