Any tricks to changing a driver's side headlamp on a 08 without taking the whole car apart? Thanks.
Headlamp Change
10 posts · 6,252 views
Replies 9
you need to find someone with tiny hands...
I have large hands and have to take the bumper off and headlight out everytime
I have large hands and have to take the bumper off and headlight out everytime
you have to take the bumper off?
Without extremely tiny hands, the easiest way to change the bulb is to physically remove the headlight assembly. This is held in place by 3 fasteners, one of which is unfortunately concealed by the bumper cover. You need to remove the push pins along the top and release the sides where bumper meets the fenders. Then the bumper can be tilted forward enough to reveal the hidden headlight fastener.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I removed battery and airbox to replace one of the two parking/running bayonet type bulbs. Would expect same for headlamp.
much easier by removing bumper skinOriginally Posted by dogsridewith ↑I removed battery and airbox to replace one of the two parking/running bayonet type bulbs. Would expect same for headlamp.
+1Originally Posted by Exiwolfman ↑much easier by removing bumper skin
Is this a hatchie specific deal?!
On my sedan i have excellent access to my bulbs...of course now with my h1 hid projector retrofit its a little tedious but i do not have to remove a thing to gain access
On my sedan i have excellent access to my bulbs...of course now with my h1 hid projector retrofit its a little tedious but i do not have to remove a thing to gain access
Thanks. I wasn't having a good day that day in the cold. I ended up getting the headlight assembly out enough to get the job done. I curse the designer of that......
yeah, i was thinking the same thing too, but his profile says 'hatchback'. i have an 07 sedan and the bulb changes are simple. i've heard it's different on the 3-door.Originally Posted by malibuguy ↑Is this a hatchie specific deal?!
On my sedan i have excellent access to my bulbs...of course now with my h1 hid projector retrofit its a little tedious but i do not have to remove a thing to gain access
i had a 3-door 08 for a while, but i don't recall ever having to change bulbs(i did lots of other things though- axle-back exhaust, lowering springs, strut tower bar).