Yarisworld Archive

Public service announcement re: license plate bolts

8 posts · 7,358 views

tmontagueOriginal postCaledonia Ont. · Jan 25, 2017#1
Do yourselves a favor for those who live in the rust belt. Anti seize your license plate bolts and replace them with new ones if they're rusted.

I just wasted 2 hours of time to remove sheared off bolts that I ended up breaking off an ez out in one of them.

Replacements are M6 1.00 25mm length.

Replies 7

WeeYariGeorgetown, Ontario, Canada · Jan 25, 2017#2
Stainless FTW!

At least on the Gen2 HB, both front and back are bolted into plastic.
dogsridewithUSAnotCA · Jan 25, 2017#3
I broke an EZ-out or two as a kid. Don't use, and wouldn't except maybe for a bolt/screw drilled out until the thread base was just kissed somewhere and the remains could be collapsed and picked out. (Finally got a cheap set of reverse drill bits said to facilitate this.)
An easy out should work OK on a bolt overtorqued in a clean threaded hole that lost its head...because the remains is now loose. But if the bolt tightened up by packing rust as it was backed out, then an EZ-out in a too-small center hole is just going to swell the bolt tighter until the EZ breaks.
My 91 Corolla was covered with little 10mm head fine thread screws that had to be worked out by tiny increases in amount of CW and CCW rotation, while being dosed with PB Blaster.
ExiwolfmanWasaga beach · Jan 26, 2017#4
use plastic bolts for plates cos if brake easy to clean out
dogsridewithUSAnotCA · Jan 26, 2017#5
Might loose a plate w/ plastic screws. (Maybe somebody parks-by-ear) Hardware store trays should have stainless ones in this size. Steel installed greased would be removable for a long time.
ExiwolfmanWasaga beach · Jan 26, 2017#6
Originally Posted by dogsridewith ↑
Might loose a plate w/ plastic screws. (Maybe somebody parks-by-ear) Hardware store trays should have stainless ones in this size. Steel installed greased would be removable for a long time.
Actually most dealership use plastic plate screws do to rusting problem with anything else , they are strong and don't come out plus if broken one can simply drill the hole out and good to go ...Five min tops .

Sent from my SM-G935F using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Jan 26, 2017#7
^ not in my experience. I've never received a vehicle with plastic bolts.


Sent from my iPhone using Tapatalk
ExiwolfmanWasaga beach · Jan 26, 2017#8
Originally Posted by WeeYari ↑
^ not in my experience. I've never received a vehicle with plastic bolts.


Sent from my iPhone using Tapatalk
Well Toyot does it and does make a huge difference.

Sent from my SM-G935F using Tapatalk