Yarisworld Archive

Led cubes wired into high beams?

8 posts · 3,858 views

Yaris709Original postNewfoundland · Jan 24, 2017#1
Hey guys. Lighting question once again lol I have a set of led cubes lights on the front of my car. They aren't hooked up too anything currently. I also have a light bar on the front too but that has its own harness. I want to wire the cubes to the high beam switch. How would I go about doing this?

Replies 7

miisergreece · Jan 24, 2017#2
No idea of how to do it. But I really want to see some pictures from you car with these leds ;)


Sent from my iPhone using Tapatalk
Yaris709Thread starterNewfoundland · Jan 24, 2017#3
I'll try to get a picture in the next couple days! I drive to work in the morning and it's dark and when I drive home it's dark. But I'll try to get one for you. Doesn't look bad imo
miisergreece · Jan 24, 2017#4
Originally Posted by Yaris709 ↑
I'll try to get a picture in the next couple days! I drive to work in the morning and it's dark and when I drive home it's dark. But I'll try to get one for you. Doesn't look bad imo


I will wait for them ;) it might be an interesting visual change and practical someone without fog lights


Sent from my iPhone using Tapatalk
Kaotic LazagnaCentral Valley, CA · Jan 24, 2017#5
I'm not an electrical/wiring expert, but I'd assume you'd tap into the high beam wire, run it to a proper relay, relay to positive of the battery, and relay out to the LED cubes. So when the high beams are on, it'll trigger the cubes to turn on too.
Kaotic LazagnaCentral Valley, CA · Jan 24, 2017#6
I was close. lol. You can use this as a reference (scroll down to "1. Adding driving lights that come on with the headlight main beam"):

http://www.12voltplanet.co.uk/relay-guide.html

So instead of the low beams, you'll be tapping "terminal 86" to the high beams. I'll be doing this with my X5 LED foglights if they fit somewhere. I'll wire them to the parking lights.
Yaris709Thread starterNewfoundland · Jan 25, 2017#7
Thought it over again today and I think I'm just gonna wire them into my light bar instead of cutting into factory wiring. It just sketches me out a little bit. Bought some self stripping tap connectors so I won't have to be hacking you wires completely. And I tried to upload a picture but it wouldn't work!
Kaotic LazagnaCentral Valley, CA · Jan 25, 2017#8
Originally Posted by Yaris709 ↑
Thought it over again today and I think I'm just gonna wire them into my light bar instead of cutting into factory wiring. It just sketches me out a little bit. Bought some self stripping tap connectors so I won't have to be hacking you wires completely. And I tried to upload a picture but it wouldn't work!
Posi taps should be fine, as well as the splice connectors. Nothing sketch about them as long as you use the proper size connectors.