Replies continued
David CMontreal · Feb 25, 2017#51If only our steelies wouldn't rust out from the winter, that'd be great to have here too when you don't have mags already !
Envoyé de mon iPhone en utilisant Tapatalk
ern-dizCA all day · Feb 25, 2017#52Boom! Love it.
scratchpaddyThread starterPhoenix · Feb 26, 2017#53 Originally Posted by
NYC-SE ↑ Looks great. A simple solution is sometimes the best.
Those are the solutions I like best. Simple and practical, and cheap. 😉
Originally Posted by
David C ↑ If only our steelies wouldn't rust out from the winter, that'd be great to have here too when you don't have mags already !
The paint on steelies is garbage. It doesn't hold up to anything. Stock steelies don't rust here, but all of them are dull and chalky after a few years. Mine have actually been re-painted at some point. That's why they're shiny. They didn't even do a good job, getting paint all over the lugs and hubs, but it still holds up way better than the stock treatment. If you were to put some real paint on your wheels, I bet they could hold up to the winter roads.
Originally Posted by
ern-diz ↑ Boom! Love it.
👍
scratchpaddyThread starterPhoenix · Feb 27, 2017#54The eBay caps arrived. I tried them on... they wouldn't clip on at all. Way too loose. I'm not sure if it was the design, or if the ones I got were stretched out, even though they look to be in better shape than the ones I found in the junkyard.
Apparently Toyota switched dies sometime in 1994. They look the same on the outside, but they switched from eight small clips to four larger clips. One of my junkyard caps (1990) is on the right, with an eBay cap (1999) on the left.
Picture not included in this copy The wheels have a groove near the exterior edge of the hub which the caps are supposed to clip into. I just needed to make that diameter bigger so these newer caps could clip on.
Picture not included in this copy I took some measurements and came up with a sleeve to fit over the hub, which would snap into the existing groove and give a new lip with a diameter of 62mm instead of 60mm.
Picture not included in this copy Picture not included in this copy It took a few trials to arrive at that exact design, but these dimensions got the new caps to snap on pretty much the same as the old caps without the adapter.
Picture not included in this copy It would have been a whole lot quicker and easier just to wrap the hub with tape or something to make it thicker, but that's no fun. 😛 I might just design and print whole new caps at some point. That would be fun. Maybe it's what I should have done from the start.
ern-dizCA all day · Feb 27, 2017#55Wow, that's a super pro approach to a very small detail. Kudos to you, sir!
justanotherdrunkSilicon Valley · Feb 27, 2017#56 Originally Posted by
ern-diz ↑ Wow, that's a super pro approach to a very small detail. Kudos to you, sir!
+1
NYC-SENYC · Feb 27, 2017#57I take back my comment about this being a "simple solution."
scratchpaddyThread starterPhoenix · Feb 28, 2017#58 Originally Posted by
NYC-SE ↑ I take back my comment about this being a "simple solution."
😆
It was still cheap, though. And fun. I used to work at a foundry, where I designed and built tooling for all the production processes. I miss designing stuff. I'm looking for a new job doing that kind of thing now.
ern-dizCA all day · Feb 28, 2017#59lol @ Hubcap Enthusiast
Love it 😆
scratchpaddyThread starterPhoenix · Apr 30, 2017#60Well, I haven't been doing much with my own car recently. I finally got back into a real job, and it's even closer than my last one. Two miles! I take the bike.
I washed all the bird crap off of it today. I'm sick of parking under trees for a bit of shade. After four years, I signed up for a covered parking spot at my apartment today, for $15 per month. Apparently I'll have to share. 🙁
Picture not included in this copy bradbowlHawaii · Jul 26, 2017#61I just came across your thread today and I wanted to say that you take incredible landscape photography! Very beautiful.
The Blazing Blue Yaris is also awesome. :D