Yarisworld Archive

shiny for 10 minutes

12 posts · 7,487 views

SirDigbyOriginal postDenver, Colorado · Nov 29, 2016#1
I bought a weaponR exhaust manifold. it was shinny. I only got to look at it for about 10 minutes.
now it's not shinny anymore :(

Picture not included in this copy

unshinified

Picture not included in this copy

Replies 11

Bluevitz-rsOshawa, Ontario, Canada · Nov 29, 2016#2
Yeah but header wrap makes it look legit!
SirDigbyThread starterDenver, Colorado · Nov 30, 2016#3
it also helps with flow and scavenging. plus, that computer being 6 inches from the manifold scares me...
invader166Langley, BC · Nov 30, 2016#4
You have great taste sir. 👍

Personally I think you went a bit over the top with the wrap, but it does look very nice.👏

I've been running mine for nearly 2 years with no wrap or heat shield, and never ran into any problems.😉
SirDigbyThread starterDenver, Colorado · Dec 2, 2016#5
tri Y makes for better low end torque. :) I didn't by the DC one because i'm not looking for top speed. I am looking to go quickly....
and the wrap helps on any engine. higher temperatures (to an extent) creates higher pressure/flow, which creates better scavenging from sister cylinder, which is exploited by the try Y pipe. (as the theory goes)
JessMessWaldorf Maryland · Dec 4, 2016#6
Sweet looks awsome
ncp13Athens Greece · Jan 25, 2017#7
Looks good, how does it perform? (butt dyno ?)

I have a spare stock manifold.. I should wrap it for educational purposes 😉
malibuguyWestminster, MD · Jan 25, 2017#8
be sure to port-match the header to the gasket. There is some shrouding on them. Plus while your at it, investigate the inner joints & blend as necessary. Mine had some really rough joints
Elwe2kHouston, TX · Jan 25, 2017#9
That looks awesome! Now I want one 🙁

I always wondered if this Yaris parts fit in a 1st gen US-Spec Echo. It's the same engine though.
malibuguyWestminster, MD · Jan 25, 2017#10
^ outlet flange bolt pattern is wider for the yaris and the outlet is in a slightly different position. You can probably use one...just modification to your front pipe will be needed.
SirDigbyThread starterDenver, Colorado · Jan 25, 2017#11
Originally Posted by ncp13 ↑
Looks good, how does it perform? (butt dyno ?)

I have a spare stock manifold.. I should wrap it for educational purposes 😉
i have not installed it yet. need to buy the rest of the parts. (resonator and muffler) then i'll go get it all plumbed up. waiting till do my taxes 😁
Elwe2kHouston, TX · Jan 26, 2017#12
Originally Posted by malibuguy ↑
^ outlet flange bolt pattern is wider for the yaris and the outlet is in a slightly different position. You can probably use one...just modification to your front pipe will be needed.
You mean like replace the bolt pattern with another aftermarket pipe? or maybe adapt the OEM outlet flange? I was thinking about adding a aftermarket pipe and/or exhaust from newer models and customise to fit....