PinchliteOriginal postBarrie Canada · Nov 26, 2016#1Wheels:16x7/4x100mm offset 40
2007 2DR HB.
I was thinking 1.5 drop.
Roads are good in my parts.I kind of have an obsession of missing every bump,manhole cover etc for some reason already on stock.Mind you I have always done this with all of my cars.
Replies 58
SirDigbyDenver, Colorado · Nov 26, 2016#21.5 inches in the rear is pretty standard. you can go a lot more if you want to. :)
PinchliteThread starterBarrie Canada · Nov 26, 2016#3I am going the cheapest route.I am just getting other springs.I dont drive aggressivly at all but just want less wheel well showing with the wheel specs I posted
Tire BTW are 205/45R16 Comp TA 2
Here is springs I had in mind.
http://www.odparts.ca/catalog/ksport...32-p-7026.html ExiwolfmanWasaga beach · Nov 26, 2016#4 Originally Posted by
Pinchlite ↑ Wheels:16x7/4x100mm offset 40
2007 2DR HB.
I was thinking 1.5 drop.
Roads are good in my parts.I kind of have an obsession of missing every bump,manhole cover etc for some reason already on stock.Mind you I have always done this with all of my cars.
Tein springs with kyb struts plus TRD swaybar 2 inch drop works perfectly on my Yaris.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#5Well I already have rims and tires in the dimensions that I mentioned earlier.
I can only afford springs.
Basic question would this work without being a problem?
1 3/4'' drop
P.S
I may be able to squeeze in the sway bar into my budget if it helps?
ExiwolfmanWasaga beach · Nov 27, 2016#6 Originally Posted by
Pinchlite ↑ Well I already have rims and tires in the dimensions that I mentioned earlier.
I can only afford springs.
Basic question would this work without being a problem?
1 3/4'' drop
P.S
I may be able to squeeze in the sway bar into my budget if it helps?
Well I would save ur money cos if ur car has high km its going to need struts and might as well save the labor costs and do it once right.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#7The struts are 2 1/2 years old.I have receipts and my mechanic said they are not original.
If struts having high kilometers on them being the deciding factor then I will go ahead and do the springs.
Thanks for reply back.
ExiwolfmanWasaga beach · Nov 27, 2016#8Go for it, takes about 2.5 hrs for the whole job to lower ur car than u will need alignment done to fix toe set.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#9I will let a shop do it for me.
I do have the tools besides the spring tensioner which I could rent but I dont have proper place to do the job.
I will ask my regular mechanis what he would charge.
ern-dizCA all day · Nov 27, 2016#10Like Exiwolfman, I'm on the Tein S Tech springs, but I'm still on factory shocks/struts. Loving every second of it.
PinchliteThread starterBarrie Canada · Nov 27, 2016#11Well those are 1.5 and are almost double the cost of what I linked.$358.00 CAD.
Would 1.5 even make a visually noticable difference?
If the ones I linked are no good then I will probaly hold off putting the new rims on this summer.
SirDigbyDenver, Colorado · Nov 27, 2016#12 Originally Posted by
Pinchlite ↑ Well those are 1.5 and are almost double the cost of what I linked.$358.00 CAD.
Would 1.5 even make a visually noticable difference?
you get what you pay for. Tein's are almost the best suspension components you can get for under $4000.
1.5 makes a huge difference in visual appearance.
ExiwolfmanWasaga beach · Nov 27, 2016#13 Originally Posted by
Pinchlite ↑ Well those are 1.5 and are almost double the cost of what I linked.$358.00 CAD.
Would 1.5 even make a visually noticable difference?
If the ones I linked are no good then I will probaly hold off putting the new rims on this summer.
One can find teins at a lower price and ya it's a noticeable difference between 1.5 and 2 inch drop.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#14So 1.5 drop with the wheels and tire sizes I posted/mentioned would look okay.(2 DR HB)
As long as it does not have too much gap then I may go 1.5 and go for the tein spring afterall.If a few things go as planned I can swing it in my budget.
ExiwolfmanWasaga beach · Nov 27, 2016#15 Originally Posted by
Pinchlite ↑ So 1.5 drop with the wheels and tire sizes I posted/mentioned would look okay.(2 DR HB)
As long as it does not have too much gap then I may go 1.5 and go for the tein spring afterall.If a few things go as planned I can swing it in my budget.
Well I would go with drop first than wheels with ur wheels I think teins should be fine.
Go low or go home lol
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#16Thats my plan.I will not be putting on new wheels untill I lower.
I just was not sure 1.5 was enough as I have read many posts that say 1.5 is not even noticable?
Did you see the wheel and tirespecs I posted?
ExiwolfmanWasaga beach · Nov 27, 2016#17 Originally Posted by
Pinchlite ↑ Thats my plan.I will not be putting on new wheels untill I lower.
I just was not sure 1.5 was enough as I have read many posts that say 1.5 is not even noticable?
Did you see the wheel and tirespecs I posted?
Well I'm on 195 55 15s and on teins so compare that size to urs and I'm 42 offset.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#18I already have this bought.
205/45R16 Comp 2
Wheels:16x7/4x100mm offset 40
ExiwolfmanWasaga beach · Nov 27, 2016#19 Originally Posted by
Pinchlite ↑ I already have this bought.
205/45R16 Comp 2
Wheels:16x7/4x100mm offset 40
Just compare size... I say u should be find
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#20Okay.Going to find some tein 1.5 springs within Canada and order them up.
I will get the springs installed ASAP so once summer arrives I just have to put on the wheels then get an alignment.
Thanks for you're and everyone elses help.
ExiwolfmanWasaga beach · Nov 27, 2016#21 Originally Posted by
Pinchlite ↑ Okay.Going to find some tein 1.5 springs within Canada and order them up.
I will get the springs installed ASAP so once summer arrives I just have to put on the wheels then get an alignment.
Thanks for you're and everyone elses help.
Have fun post pics after and teins are 1.9 drop but more like 2.o inch.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#221.9???? I thought it was supposed to be 1.5.
Why cant I get a proper answear.
I have spent days reading over many forums.Some say 1.5 not enough,others say 2'' too much.
I have a feeling I will be getting the improper spring height and wont be able to return after installation.
ExiwolfmanWasaga beach · Nov 27, 2016#23 Originally Posted by
Pinchlite ↑ 1.9???? I thought it was supposed to be 1.5.
Why cant I get a proper answear.
I have spent days reading over many forums.Some say 1.5 not enough,others say 2'' too much.
I have a feeling I will be getting the improper spring height and wont be able to return after installation.
Tein springs are 1.9 but closer to 2 inch I run a set on my 07 Yaris 2 door
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#24Okay.That sounds better.
Here is pic of 1.5 I believe.
Same tire and rim size as mine.
Tanabe DF210 with 16x7 +40offset on 205/45/16 tyres
http://i.imgur.com/DSV3drZ.jpg Can you post pic of your car with wheel and tire specs?
Also exact springs that you bought/have.
ExiwolfmanWasaga beach · Nov 27, 2016#25 Originally Posted by
Pinchlite ↑ Okay.That sounds better.
Here is pic of 1.5 I believe.
Same tire and rim size as mine.
Tanabe DF210 with 16x7 +40offset on 205/45/16 tyres
http://i.imgur.com/DSV3drZ.jpg
Just do it lol 😁
Sent from my HTC One A9 using Tapatalk
ExiwolfmanWasaga beach · Nov 27, 2016#26Picture not included in this copy
There is mine on teins
Sent from my HTC One A9 using Tapatalk
tmontagueCaledonia Ont. · Nov 27, 2016#27Fwiw 1.5" drop is more than noticeable. It made a huge difference in the appearance of my yaris.
Imo lower than that gives you the "wheels tucked in" look which I didn't want as it's not my thing and I wanted function over form. Also the car sits lower with a driver in it than what you'll see when you're standing beside it so take that into account.
The springs will also settle after a few months of driving and will sit slightly lower
ExiwolfmanWasaga beach · Nov 27, 2016#28Picture not included in this copy
One more lol
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#29Very nice.
Going to bite the bullet and go 1.5 to be on the safe side.Thanks again.
PinchliteThread starterBarrie Canada · Nov 27, 2016#30 Originally Posted by
tmontague ↑ Fwiw 1.5" drop is more than noticeable. It made a huge difference in the appearance of my yaris.
Imo lower than that gives you the "wheels tucked in" look which I didn't want as it's not my thing and I wanted function over form. Also the car sits lower with a driver in it than what you'll see when you're standing beside it so take that into account.
The springs will also settle after a few months of driving and will sit slightly lower
What wheel and tire size do you have?
Have any side pics.
ExiwolfmanWasaga beach · Nov 27, 2016#31 Originally Posted by
Pinchlite ↑ Very nice.
Going to bite the bullet and go 1.5 to be on the safe side.Thanks again.
Safe side lol
I live in collingwood and we get lots of snow ❄ no issues what so ever. Ride quality is awesome too.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 27, 2016#32I know.Midland here.
the other fella said 1.5 is plenty good.
Confused again.
Perhaps i should put the whole idea on the back burner for know.
Way too much uneeded brain racking.
ExiwolfmanWasaga beach · Nov 27, 2016#33 Originally Posted by
Pinchlite ↑ I know.Midland here.
the other fella said 1.5 is plenty good.
Confused again.
Perhaps i should put the whole idea on the back burner for know.
Way too much uneeded brain racking.
Lol I say go low or go home if ur in midland than come by park ur car next to mine and see.
Sent from my HTC One A9 using Tapatalk
tarkusYYZ · Nov 27, 2016#34 Originally Posted by
Pinchlite ↑ I the other fella said 1.5 is plenty good.
This guy…
Originally Posted by
SirDigby ↑ 1.5 makes a huge difference in visual appearance.
Don't overthink the half inch. 1.5 or 2 inch. Just do it.
Picture not included in this copy Sent from my LG G2 with CM13 using Tapatalk
tmontagueCaledonia Ont. · Nov 27, 2016#35 Originally Posted by
Pinchlite ↑ What wheel and tire size do you have?
Have any side pics.
I'll look for pics but I just put my winters on.
My summer rims are 15x6.5 and +35 offset running 185/60 r15
I have 10mm spacers in the rear. The fit is very flush with no rubbing even when hitting the bump stops on rough Hamilton roads.
Its the exact looks and function I wanted and couldn't be happier.
RigaudRigaud, Quebec, Can. · Nov 28, 2016#36Been on a 2" drop since 2014 and on 16x7" 40 offset wheels. Tires 205/45R16.....
I could still lower .5" to 1" more.
Your 1.5" drop is very conservative. Go................Just Do It!!!
PinchliteThread starterBarrie Canada · Nov 28, 2016#37ExiwolfmanWasaga beach · Nov 28, 2016#38 Originally Posted by
Pinchlite ↑
Not much of a lowering with that setup, cheap sure but so is a bag of potatoes in the trunk lol
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 28, 2016#39ExiwolfmanWasaga beach · Nov 28, 2016#40 Originally Posted by
Pinchlite ↑
Haha that looks good and you will definitely enjoy it next get a rear swap bar cos that makes a huge difference.
Sent from my HTC One A9 using Tapatalk
ExiwolfmanWasaga beach · Nov 28, 2016#41Also once u get ur springs I would recommend u spare them with under body rust proof stuff cos are winters are going to kill them fast do to the progressive spring setup....i used rock guard on mine before installing.
Sent from my HTC One A9 using Tapatalk
ExiwolfmanWasaga beach · Nov 28, 2016#42Also cut down ur bump stops on ur struts, funny is I think I still have a set of sport line 1.5 drop springs around the house after I switched to tein springs, free if u want just need to find them lol
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 29, 2016#43 Originally Posted by
Exiwolfman ↑ Haha that looks good and you will definitely enjoy it next get a rear swap bar cos that makes a huge difference.
Sent from my HTC One A9 using Tapatalk
I will get to researching one know.I will put it on same time as I do the springs.
I am not expecting great handling or anything outstanding but as long as the wheels dont look silly on the car I will be happy for know.
PinchliteThread starterBarrie Canada · Nov 29, 2016#44 Originally Posted by
Exiwolfman ↑ Also cut down ur bump stops on ur struts, funny is I think I still have a set of sport line 1.5 drop springs around the house after I switched to tein springs, free if u want just need to find them lol
Sent from my HTC One A9 using Tapatalk
Wish I would have known earlier (I still have a set of sport line 1.5 drop springs around)
I ordered springs yest afternoon already
Some here on this forum said dont cut bumpstops???
PinchliteThread starterBarrie Canada · Nov 29, 2016#45 Originally Posted by
Exiwolfman ↑ Also once u get ur springs I would recommend u spare them with under body rust proof stuff cos are winters are going to kill them fast do to the progressive spring setup....i used rock guard on mine before installing.
Sent from my HTC One A9 using Tapatalk
Was already going to do the entire under floor while I had good access to underside.
But will do like you mentioned for sure.
ExiwolfmanWasaga beach · Nov 29, 2016#46 Originally Posted by
Pinchlite ↑ Wish I would have known earlier (I still have a set of sport line 1.5 drop springs around)
I ordered springs yest afternoon already
Some here on this forum said dont cut bumpstops???
Cutting bumps stops does make a difference in how it works. You gone go lower so you want suspension travel not ride on the bump stops lol
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 29, 2016#47I seen a post where they were cut down.
How much do I leave attached?
I will be doing the springswap my self aswell as adding swaybar.
I did replace struts on a civic almost 20 years ago so i know I can do it.
ExiwolfmanWasaga beach · Nov 29, 2016#48 Originally Posted by
Pinchlite ↑ I seen a post where they were cut down.
How much do I leave attached?
I will be doing the springswap my self aswell as adding swaybar.
I did replace struts on a civic almost 20 years ago so i know I can do it.
Simple logic ur car will sit 1.5 inch lower so why would u use stock hight bump stops cut 1 inch off at least or every other bump u will hit them and restrict ur suspension travel...also good luck with swaybar links they are fun to remove, use heat if possible also remove wipers and all in that are 10 min job to get to the top shock mounts.
Sent from my HTC One A9 using Tapatalk
PinchliteThread starterBarrie Canada · Nov 29, 2016#49I have a small oxy-acet torch and have used it for similier nuts.
I will cut one inch off.I actually already had the cowling removed previously,piece of cake.
Thanks for the pointers.
Just trying to locate a reasonably priced sway within Canada.Stillwaiting back for a few replys.
ExiwolfmanWasaga beach · Nov 29, 2016#50 Originally Posted by
Pinchlite ↑ I have a small oxy-acet torch and have used it for similier nuts.
I will cut one inch off.I actually already had the cowling removed previously,piece of cake.
Thanks for the pointers.
Just trying to locate a reasonably priced sway within Canada.Stillwaiting back for a few replys.
I will see if I can get u a TRD swaybar at cost, I'm no longer with Toyota but my buddy is still there and is a parts guy.
Sent from my HTC One A9 using Tapatalk