Yarisworld Archive

Various bolt on parts *feeler*

27 posts · 5,919 views

tmontagueOriginal postCaledonia Ont. · Nov 2, 2016#1
I'll be doing the 2zr swap hopefully this summer as I have the time to find pieces and am getting the engine today. I will obviously be taking the 1nz out of my car and with it are all of the bolt on mods that made this car so much fun to drive. I'm going to list everything that I will be selling come summer and what I'd like to know is what you guys would actually be willing to pay for those that realistically want to install these bolt ons.

The more I sell them for the sooner the swap can be done, but that said this is to give me an idea for my budgeting.

Parts:
Micro Image/Golden Eagle Intake Manifold
1zz Throttle body with chip swap
DC sports exhaust header
Micro Image light weight drive pulley
TRD short ram intake

I also would be able to sell any other parts from the 1nz such as alternator and vvti solenoid.

If you have interest in any of the above parts please just post so and let me know what you would actually be willing to pay for them.

These bolt-ons are not cheap, but that said they are worth nothing to me sitting in my shed once they are off the car and if someone is willing to offer me a reasonable price I'd be happy to let them have the parts.

Replies 26

WeeYariGeorgetown, Ontario, Canada · Nov 2, 2016#2
a/c compressor?
tmontagueThread starterCaledonia Ont. · Nov 2, 2016#3
Yup that I can part with.
tarkusYYZ · Nov 2, 2016#4
I would like the throttle body (to go with the modified manifold I bought from you ☺️) What kind of ballpark are you looking to sell the pulley for? Is it the whole set, or just the main pulley?

Sent from my LG G2 with CM13 using Tapatalk
tmontagueThread starterCaledonia Ont. · Nov 2, 2016#5
This is just the main pulley (crank pulley) at this point I don't have solid prices I want since a part is only worth what someone will pay for it. They go for just over $100 I'd be happy with around 60, but come summer when am actively looking for confirmed buyer I may accept any offer.

The TB would be the best to see with the manifold as they go so well together, but I have no problem splitting them up as the goldeneagle manifold will accept the 1nz TB as well.
tarkusYYZ · Nov 3, 2016#6
I just PM'ed you about the pulley and TB.

I think the TB will be happy to be reunited with the modified stock manifold I bought from you :-)

Sent from my LG G2 with CM13 using Tapatalk
thebarberGrand Rapids, MI · Nov 3, 2016#7
i might be interested in the intake manifold

maybe even the engine depending on mileage and price
tmontagueThread starterCaledonia Ont. · Nov 3, 2016#8
PM me if you want to talk about the price. I'd love to sell the engine to a YW member as opposed to selling it to a yard and have them mark it up. The engine is in mint condition and is currently sitting at 165k km.

Throw in some HID's and ballasts and I'll give you a price you're willing to spend ;)
tarkusYYZ · Nov 3, 2016#9
I've seen tmontague's intake manifold in person, and I have to say that it's a really impressive looking piece of metalwork 👍

Sent from my LG G2 with CM13 using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Nov 3, 2016#10
Originally Posted by thebarber ↑
maybe even the engine depending on mileage and price

F**k! There goes my compressor.



Sent from my iPhone using Tapatalk
tmontagueThread starterCaledonia Ont. · Nov 3, 2016#11
Why do you say that? the compressor isn't something that I'd sell with the engine unless specifically asked for from the buyer of the engine. I'm assuming Barber want a newer engine in good condition to eventually replace the 1nz in his Echo. If he currently has a/c his compressor will bolt right up.
WeeYariGeorgetown, Ontario, Canada · Nov 3, 2016#12
Originally Posted by tmontague ↑
If he currently has a/c his compressor will bolt right up.
Really? Didn't think the Echo and Yaris shared the same compressor. Thought pulleys were different.
tarkusYYZ · Nov 3, 2016#13
You might be able to get Barber's compressor then.

Sent from my LG G2 with CM13 using Tapatalk
tmontagueThread starterCaledonia Ont. · Nov 3, 2016#14
Ya nvm I just remembered the Echoes compressor has a clutch whereas the Yaris does not. I don't know if they are inter changeable.

Come next year you guys can figure out who wants what but at that time it'll be whomever has cash will get them first.
thebarberGrand Rapids, MI · Nov 3, 2016#15
I won't need the a/c compressor
thebarberGrand Rapids, MI · Nov 3, 2016#16
And echo 1nz pullies are different than the yaris
ThebigwicksLouisiana · Nov 3, 2016#17
How much for the headers and sort ram?
tmontagueThread starterCaledonia Ont. · Nov 4, 2016#18
$220 for header, $60 for ram is what I'm thinking but it's all obo
bladesmith6PA · Nov 4, 2016#19
i would be interested in the manifold depending on how much you want and how soon you want to sell it.
ThebigwicksLouisiana · Nov 7, 2016#21
Any pictures of the intake?
tmontagueThread starterCaledonia Ont. · Nov 7, 2016#22
I can take pictures tomorrow and post them up
tarkusYYZ · Nov 7, 2016#23
Deleted (posted in wrong thread)
PinchliteBarrie Canada · Dec 3, 2016#25
I will Take the short ram intake.Would like a few ppics if still available.

I lice in Canada so not sure if thats a problem?
tmontagueThread starterCaledonia Ont. · Dec 3, 2016#26
Pm sent, there is a picture of it on my for sale thread in the OP, this thread died when that one started

Afternarket bolt on for sale now
tarkusYYZ · Dec 3, 2016#27
Originally Posted by Pinchlite ↑
I lice in Canada so not sure if thats a problem?
tmontague is also in Canada (Hamilton). If you have problems with lice, I'm told tea tree oil can be very effective Picture not included in this copy


Sent from my LG G2 with CM13 using Tapatalk