Yarisworld Archive

Snow White (Pic Heavy)

97 posts · 100,353 views · page 1 of 2

Kaotic LazagnaOriginal postCentral Valley, CA · Aug 21, 2016#1
Since I don't post much on any forums now days, I figured I'd pop back in here again and show you guys what replaced "Vios." She was replaced with "Snow White," a 2014 Scion FR-S Monogram.

Day I got her after waiting over a month for my order:

Picture not included in this copy

Was rather pissed off that it came to us with 12 miles (a little under since it gets driven 2 miles during the pre-delivery inspection process).
Picture not included in this copy


First mod was take any usable LEDs from Vios and use them in Snow White, so dome light and rear license plate lights.
Picture not included in this copy


First full detail after about a week of getting her, and rebadged with genuine Toyota GT86 emblems
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Got full 3M window tint (Color Stable in the rear three, and Crystalline front sides)
Picture not included in this copy


Put in a K&N drop in filter (makes more power, unlike a full intake replacement that actually loses power)
Picture not included in this copy


Installed a Berk Technology track pipe (muffler delete)
Picture not included in this copy


Friend's FR-S was stolen and recovered, so I decided to help him out by buying his rear roof spoiler (only replica piece on Snow White).
Picture not included in this copy

Replies 96

Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#2
Since the OEM reverse light are garbage, decided to install some 921 LEDs from The Retrofit Source.

Picture not included in this copy

Picture not included in this copy

OEM for comparison:
Picture not included in this copy


Installed Tein Flex-Z coilovers, and limited edition (hyper silver) WedsSports TC105N with Gruppe-S center caps. 17x9, ET35, 245/40/17 tires.
Picture not included in this copy

Picture not included in this copy


Installed genuine Toyota 86 clear side markers with VLEDs HVA 194 bulbs.
Picture not included in this copy

Picture not included in this copy

OEM amber side markers and bulbs for comparison (yes barely looks on compared to the VLED 194 bulbs):
Picture not included in this copy
ezhacker1San Francisco · Aug 21, 2016#3
First Post!!

Lovely car. So purty
Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#4
Other misc. mods:

Toyota backing to my smart key to get rid of the Scion name.
*edit, picture no longer shows, and I can't find the pic anymore.


Replaced the factory Osram HID bulbs with Osram CBI HID bulbs for slightly cooler Kelvin.
*sorry, will have to click on my IG link*
https://www.instagram.com/p/BHyA3hph439/


Stopped using OEM cabin filters, and replaced with Blitz hybrid cabin filter:
https://www.instagram.com/p/BFhPlCtmy9O/


Open Flash Tablet stage 1 tune to better utilize California's crappy 91 octane gas, and to help reduce the infamous FA20 torque dip.
https://www.instagram.com/p/ztjHVdmy-w/


Harbor Freight tow strap. I got high centered in our gravel storage lot at work. Had to get my manager to pull me out with his 4Runner.
https://www.instagram.com/p/BE4XC1EGy9I/
Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#7
Originally Posted by ezhacker1 ↑
First Post!!

Lovely car. So purty
LOL Jon! You would be the one 😆
kimonaHuntington Bch, CA · Aug 21, 2016#8
LOVE it!

BTW, is "snow white" a solid white paint or a sparkly white?
TerenceCruzCali · Aug 21, 2016#9
Well done Laz, I love the tasteful yet subtle mods. Keep it up!
ern-dizCA all day · Aug 21, 2016#10
Looks fantastic!
Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#11
Originally Posted by kimona ↑
LOVE it!

BTW, is "snow white" a solid white paint or a sparkly white?
She's satin white pearl =)
Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#12
Originally Posted by TerenceCruz ↑
Well done Laz, I love the tasteful yet subtle mods. Keep it up!
Thanks. Thought about going hellaflush, but 37 is crap and I already scoop up gravel into the engine bay at this height. Haha. Figured to go with a track look instead. Haha
Kaotic LazagnaThread starterCentral Valley, CA · Aug 21, 2016#13
Originally Posted by ern-diz ↑
Looks fantastic!
👍
TerenceCruzCali · Aug 22, 2016#14
Originally Posted by Kaotic Lazagna ↑
Thanks. Thought about going hellaflush, but 37 is crap and I already scoop up gravel into the engine bay at this height. Haha. Figured to go with a track look instead. Haha
Definitely not mad at you for not going the hellaflush route, I'll always love a clean track look! My next car will definitely at a similar height with some nice fitting wheels. Unless, I end up going with air ride, then I'll be going all out ;)
Kaotic LazagnaThread starterCentral Valley, CA · Aug 22, 2016#15
Originally Posted by TerenceCruz ↑
Definitely not mad at you for not going the hellaflush route, I'll always love a clean track look! My next car will definitely at a similar height with some nice fitting wheels. Unless, I end up going with air ride, then I'll be going all out ;)
I'm actually happy I didn't go the Hellaflush route. If I had stretched tires, I'm sure the wheel lips would be all scuffed up. If you refer back to the clear side marker pic, you can see how much the tires dig into the gravel by just driving through everyday.

Also, another pic of when I got high centered (I removed the gravel and dirt that went over the rim/lip/barrel before I took the pic)
https://www.instagram.com/p/BE4XPVFm...e_good_lazagna
TerenceCruzCali · Aug 25, 2016#16
Originally Posted by Kaotic Lazagna ↑
I'm actually happy I didn't go the Hellaflush route. If I had stretched tires, I'm sure the wheel lips would be all scuffed up. If you refer back to the clear side marker pic, you can see how much the tires dig into the gravel by just driving through everyday.

Also, another pic of when I got high centered (I removed the gravel and dirt that went over the rim/lip/barrel before I took the pic)
https://www.instagram.com/p/BE4XPVFm...e_good_lazagna
They definitely would be unless you have stiff enough springs. But yeah man, I hear you, this look is perfect as a daily driver.
Kaotic LazagnaThread starterCentral Valley, CA · Aug 25, 2016#17
Originally Posted by TerenceCruz ↑
They definitely would be unless you have stiff enough springs. But yeah man, I hear you, this look is perfect as a daily driver.
Not necessarily. The tires just dig into the gravel, so suspension stiffness doesn't come into play. My spring rates are on the light(er) side at 6kg square. This really neutralized my car's handling since OEM, the rear is stiffer. Which is fine, because I can take on ramps quickly and have a neutral, to slight understeer feel. However, since I lowered the car this much, my center of gravity actually became higher, so it's an odd sensation of having less body roll with a higher center of gravity. 😆
NYC-SENYC · Aug 26, 2016#18
Originally Posted by Kaotic Lazagna ↑
However, since I lowered the car this much, my center of gravity actually became higher
Not possible.
Kaotic LazagnaThread starterCentral Valley, CA · Aug 26, 2016#19
Originally Posted by NYC-SE ↑
Not possible.
I was generalizing ther terminology. The specific term is roll center. My cars roll center is higher in relation to the center of gravity since I didn't replace all other suspension components. It's a very complicated topic, but look up "center of gravity vs roll center."
SirDigbyDenver, Colorado · Aug 27, 2016#20
looks nice. too bad about the engine though.... (I don't like Subaru)
Kaotic LazagnaThread starterCentral Valley, CA · Aug 28, 2016#21
Originally Posted by SirDigby ↑
looks nice. too bad about the engine though.... (I don't like Subaru)
You haven't felt the awesome torque dip 🤣. lmaooooo. jk. Out of curiosity, what about Subaru/their engines don't you like?
ABSPLASTICCALIFORNIA · Aug 28, 2016#22
Originally Posted by Kaotic Lazagna ↑
You haven't felt the awesome torque dip 🤣. lmaooooo. jk. Out of curiosity, what about Subaru/their engines don't you like?
Whatuppp laz! Long time! lol
Nice ride btw!🙇
Kaotic LazagnaThread starterCentral Valley, CA · Sep 12, 2016#23
Originally Posted by ABSPLASTIC ↑
Whatuppp laz! Long time! lol
Nice ride btw!🙇
What's up!

Thanks, bro! She's going in for an alignment tomorrow. I added a little more negative camber to my front left, and I need them to correct the toe spec from that added change. Also, the roads I drive on suck, so I'm sure something has gone out of spec since the last time I took her in for an alignment. So OEM shoes are back on in the meantime (rather risk nicks to those than the WedsSports).
ABSPLASTICCALIFORNIA · Sep 15, 2016#24
Originally Posted by Kaotic Lazagna ↑
What's up!

Thanks, bro! She's going in for an alignment tomorrow. I added a little more negative camber to my front left, and I need them to correct the toe spec from that added change. Also, the roads I drive on suck, so I'm sure something has gone out of spec since the last time I took her in for an alignment. So OEM shoes are back on in the meantime (rather risk nicks to those than the WedsSports).
Much needed alignment lol alright man guess I'll see you around here then!
Kaotic LazagnaThread starterCentral Valley, CA · Dec 13, 2016#25
Decided to add this carbon fiber strut bar so that the engine bay isn't too boring.

Picture not included in this copy

Picture not included in this copy

And yes, I know this does nothing for my car. lol.
ern-dizCA all day · Dec 13, 2016#26
Originally Posted by Kaotic Lazagna ↑
Decided to add this carbon fiber strut bar so that the engine bay isn't too boring.

And yes, I know this does nothing for my car. lol.
lol

Are you on Wheelwell?
Kaotic LazagnaThread starterCentral Valley, CA · Dec 13, 2016#27
Originally Posted by ern-diz ↑
lol

Are you on Wheelwell?
Never heard of it. What is it? I'm not very active on forums these days 😆
Kaotic LazagnaThread starterCentral Valley, CA · Dec 15, 2016#28
How my work day started...this was the second time I got stuck...and then right after I got pulled out, I got stuck again. bah

Picture not included in this copy

Gravel is surrounding the exhaust pipe, touching the LSD, and pretty much everything else:
Picture not included in this copy

Picture not included in this copy

The rear wheel was pretty much in the air since it was fully extended.
ern-dizCA all day · Dec 15, 2016#29
😲😢
justanotherdrunkSilicon Valley · Dec 15, 2016#30
😳
Kaotic LazagnaThread starterCentral Valley, CA · Dec 24, 2016#31
Originally Posted by ern-diz ↑
😲😢
Originally Posted by justanotherdrunk ↑
😳

Yeah, wasn't fun. lol. Luckily she didn't get any damages from what I can see/tell.
Kaotic LazagnaThread starterCentral Valley, CA · Dec 25, 2016#32
In addition to installing the HU in Dory, I installed these Morimoto switchback LEDs in Snow White. Comparison pics. Passenger side is always the LEDs, and driver side is always OEM.

Turn signal
Picture not included in this copy

Parking light mode
Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · Dec 27, 2016#33
Here's a couple night shots of those switchbacks:

Picture not included in this copy

Picture not included in this copy


Great lumen output in parking light mode (anymore, and I think I'd get pulled over). However, turn signals are just not enough. I can't see them flashing on the ground from the cabin.
SirDigbyDenver, Colorado · Dec 27, 2016#34
Originally Posted by Kaotic Lazagna ↑
You haven't felt the awesome torque dip 🤣. lmaooooo. jk. Out of curiosity, what about Subaru/their engines don't you like?
I don't like how they are flat and the piston is always dragging on the bottom of the cylinder. seems like it would cause more wear. I don't like how you have to perform 2 head jobs every 70,000 miles or so. I don't like the sound they make, and how they basically run like two 2cylinder engines in opposition. manly, I don't like the people whom drive Subaru. (in my area) they are so self riotous and pompous I could puke
Kaotic LazagnaThread starterCentral Valley, CA · Dec 27, 2016#35
Originally Posted by SirDigby ↑
I don't like how they are flat and the piston is always dragging on the bottom of the cylinder. seems like it would cause more wear. I don't like how you have to perform 2 head jobs every 70,000 miles or so. I don't like the sound they make, and how they basically run like two 2cylinder engines in opposition. manly, I don't like the people whom drive Subaru. (in my area) they are so self riotous and pompous I could puke
Luckily for me, the only crazy thing in the maintenance book for the FR-S is the 60k spark plugs. Don't see anything about a head rebuild, although I knew it wasn't the most reliable engine type. haha.

The 86 doesn't sound like a "Subaru" since Subaru utilized an EL header. I actually want to replace it with an UEL header to get that boxer burble. 😆

In my area, it seems like EVO owners are what you described. lol.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 7, 2017#36
Swapped out the OEM rear turn signals with VLEDs HVA bulbs (I'll swap Dory's on my days off since I have to swap the flasher relay on her still)

Picture not included in this copy

Picture not included in this copy

I'm sure you guys can tell which is OEM and which is the VLEDs. lol
Kaotic LazagnaThread starterCentral Valley, CA · Mar 12, 2017#37
Decided to drive her to work today. Filled her up with some 100 octane on the way home.

Picture not included in this copy
ern-dizCA all day · Mar 13, 2017#38
Very nice
justanotherdrunkSilicon Valley · Mar 13, 2017#39
white + slammed +100 = yea!
Kaotic LazagnaThread starterCentral Valley, CA · Mar 14, 2017#40
Originally Posted by justanotherdrunk ↑
white + slammed +100 = yea!
Granted I tuned mine "down" to 91 octane (actually improved power and torque). The FR-S was actually tuned for 93 octane from the factory since the majority of the US has 93 readily available. I mixed 3.5 gallons of this 100 octane with the rest of my 91 octane to get a mix slightly higher than 93 octane. She mainly sits now days with DD duties going towards my Yaris, so I figured it'll be better to have that 93 mix in the tank.
Kaotic LazagnaThread starterCentral Valley, CA · Mar 15, 2017#41
Washed her and put on her better shoes again.

Picture not included in this copy
kimonaHuntington Bch, CA · Mar 15, 2017#42
Looks great! Like the wheels and meaty tyres.
Kaotic LazagnaThread starterCentral Valley, CA · Mar 15, 2017#43
Originally Posted by kimona ↑
Looks great! Like the wheels and meaty tyres.
Thanks.

Yeah, decided to go for more of a track look with everything.
Kaotic LazagnaThread starterCentral Valley, CA · May 17, 2017#44
Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · May 24, 2017#45
Picture not included in this copy

Maybe 1/4 way done. Washed, Iron-X, washed again. Still gotta clay bar, Swirl-X, maybe polish, and wax.

Iron-X is really pungent. I was wearing an R95 respirator, gloves, and eye protection when spraying it on. Even with the respirator, I could smell it. I heard neighbors down the street coughing too. Careful if you use it, and try to spray upwind. I got some overspray on my arms; luckily I don't smell that bad.
ern-dizCA all day · May 24, 2017#46
Stance on that car is so legit.
Kaotic LazagnaThread starterCentral Valley, CA · May 25, 2017#47
Originally Posted by ern-diz ↑
Stance on that car is so legit.
👍
Kaotic LazagnaThread starterCentral Valley, CA · Jun 6, 2017#48
From the FT86club summer kick off show.

Picture not included in this copy

Picture not included in this copy



You can see Snow white at the very far back. Probably at least 150 cars.
Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · Jun 6, 2017#49
Filled up with 101 octane on the way home too since she won't see another fill up for 2 months.
ern-dizCA all day · Jun 6, 2017#50
That looks like it was good times.