Yarisworld Archive

4WD Yaris / Vitz questions

30 posts · 35,924 views

SwingOriginal postHolland · Jul 26, 2016#1
Okay, I didn't know it, but apparantly there are 4WD versions made of the first and second generation Yaris. They are called Vitz in Japan, and possibly the 4WD versions were only sold in Japan or parts of Asia.
So I don't want to talk about what somebody made in his shed, but what Toyota has produced.

But what I can see now is that there are at least two 4WD versions of the Yaris/Vitz. Both same to be the 1.3 engine instead of the 1.5

1st gen: 1.3 2NZ with manual transmisison:
http://www.toyodiy.com/parts/g_J_199...5-AHMNK_2.html

2nd gen: 1.3 2NZ with automatic
http://www.toyodiy.com/parts/g_J_200...5-AHPGK_2.html

I like the idea of a 4WD yaris as it allows you to put down some power. Of course, that's not a big deal with a 1.3 petrol engine. But you can fit the 1.5 1NZ with a supercharger or turbo kit.
You could even weld the transfer case, and make it into a rear wheel driver Yaris quite easily :) (just for the fun of throwing a rwd around the corner, although 4wd is safer and provides more grip in the end)

My questions:

1. How does the 4wd work? I would assume it is an open centre diff, as with any awd road car (so not like 4x4's). But I see in the parts system a transfer case that seems to have 1 set of pinion and rack. So the axle going through the transfer case always seems to power the rear axle (via prop shaft)?
Which would be strange, you need an open diff for road driving.

2. In relation to question 1, perhaps is there a way to engage 4wd if it is not an open diff? Perhaps there could be a difference between manual and automatic here.

3. I also don't completely understand where the transfer case is located. I would assume it is between gearbox and front diff, but does that mean that the location of front diff is different from normal fwd version? And so longer/shorter axle shafts?

4. I guess that the body is a bit different to make room for the propshaft and rear diff?

Replies 29

SwingThread starterHolland · Jul 26, 2016#2
Ok in this youtube vid I see a button that allows you to lock the centre transfer case, nice! It seems to be a Japanese 3rd gen Yaris/Vitz, also 1.3 automatic. All Russian, so no idea what he is saying.
https://youtu.be/EABPx7HpAbc?t=4m33s

But that would probably mean you typically drive in front-wheel drive and you can engage the rear axle if you like (which is not suitable for dry tarmac driving, just like with old-fashioned 4x4)
However, it would probably be pretty easy to have it permanently fixed an create a rear wheel drive version. :P

Edit: I see from the parts database that it is infact the same transfer case (same part number for the housing) as the 2nd gen Vitz 4wd, both with automatic (but different engine)
So perhaps they all have a button to engage 4wd / rear axle?
SwingThread starterHolland · Jul 26, 2016#4
I know the GT4's, and they are a perfectly good example of fulltime 4wd road cars because of an center diff. The discussion over there is if the center diff is really open, or if it has some kind of LSD function etc.

The button on a Yaris 4wd (at least for 2nd gen and 3rd gen automatic 4wd versions) clearly suggests a transfer case in which you simply engage the second axle, in this case likely the rear axle. If you don't press that button, your still in 2wd mode, likely just fwd.
This is known as part-time 4wd, which you typically see on (old fashioned) 4x4 like Landcruiser Hilux etc.
In fact, I have this system on my 4x4 Hi-ace camper van.

part-time 4wd is great for off-road driving, but on dry tarmac it needs to be in 2wd mode. Fulltime 4wd is great for on road driving, especially with power. Like the GT4 is a good example.

I think the Yaris / Vitz 4wd follows the path of older Toyota 4wd small cars. Like Corolla 4wd and the Tercel 4wd. But then no low-gearing, which is not even so bad if it has an automatic. They all had standard fwd and an axle that could be used when switches a button (engaging 4wd). It doesn't seem to be like GT4 or RAV4 with fulltime 4wd.

If it is like that, (part-time 4wd) it is not ideal for handling power, since it will be a standard fwd car and you can't use the rear axle on normal roads, because it will wear and break. And drive shitty around the corner.

It would be interesting to detach the fwd shafts, and always have it in "4wd" mode, effectively creating a rear wheel drive Yaris :-D (but it will be hard to find an LSD for the rear axle)

Edit: I mean this button as shown in the youtube video:

Picture not included in this copy

This means that you typically have 2wd untill you push that button. It could be full-time 4wd at the same time, but the transfer case I see in the pictures is to simple for that. And earlier Corolla and Tercel wagons didn't have it as well. (basically all of them share the Toyota C transmission like the Yaris / Vitz)
SwingThread starterHolland · Jul 26, 2016#5
This is a diagram of the transfer case, which is pretty much the same for all three generations of the Vitz 4wd. So this is just fixed, it is no open differential. But I don't see where it is engaged (for example, by vacuum power) after pushing a button.

http://jp-carparts.com/toyota/partli...pe=27&fig=3610

Picture not included in this copy
RigaudRigaud, Quebec, Can. · Jul 26, 2016#6
4 x 4 and AWD(All Wheel Drive) is NOT the same.
kevinj93Sydney, Australia · Jul 26, 2016#7
back in the early 1990's i had an All Wheel Drive Corolla whichwas the replacement for the Tercel.

The manual was full time All Wheel Drive with a button operated diff lock for the center diff. The auto was front wheel drive with the button switching in the center diff to provide All Wheel Drive when wanted.

Not sure if the Yaris is the same...
SwingThread starterHolland · Jul 26, 2016#8
@Rigaud, I know that! Thats the whole point, what do these versions do.

@kevinj93, yeah it seems to be the same like that automatic Corolla 4wd. So it is in fact a parttime 4x4 like an old landcruiser. Only the default drive is front wheels.

Im not sure how the engaging works, i would assume something with vacuum.

I guess they are not so interesting from racing point of view unless you make it into rear wheel drive.
CTScottUSA, CT · Jul 26, 2016#9
The Vitz AWD is kind of a an interesting setup. The transfer case is driven off the front diff of the automatic transmission. It is a full time AWD system, so there is no mechanism for engaging or disengaging the AWD.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
CrankyOldManWest Michigan · Jul 26, 2016#10
Originally Posted by CTScott ↑
It is a full time AWD system, so there is no mechanism for engaging or disengaging the AWD.
Oh good, I'm not losing my mind. I know what the cross-section line drawings of the all-trac engagement transfer case looks like, so I was going crazy not finding the mechanism on this one. That's a VERY small rear diff housing, as well.
CoryMWhite Rock BC · Jul 26, 2016#11
Originally Posted by CTScott ↑

Picture not included in this copy
Some time ago there was a post wondering what the second set of holes in the torsion-beam brackets were for. This pic shows for sure that the AWD uses them. Cool.

I'm surprised that Toyota didn't house the AWD clutch in the rear diff. It allows for a much smaller T-case. I'll bet that's an off-the-shelf diff that fits other vehicles so it was cheaper to build the clutch into the T-case. May make it easier to source if someone wanted to convert.

Cheers.
SwingThread starterHolland · Jul 27, 2016#12
Originally Posted by CTScott ↑
The Vitz AWD is kind of a an interesting setup. The transfer case is driven off the front diff of the automatic transmission. It is a full time AWD system, so there is no mechanism for engaging or disengaging the AWD.

Picture not included in this copy
First of all, thanks for the pics of the bottom 👍
From which gen Yaris is this, first gen?

So it seems as if it derives power from the axle of the front right wheel? Since the transfer case is located on the outside of the front diff, on one side.

Did you see the diagram picture I posted? There seems to be no clutch or something, so a fixed transfer. Unlike a GT4 or RAV4, which actually have a centre diff. In this case it is just pinion gear and thats it.

So this means that a difference between front and rear axle (for example during cornering) is allowed because of the front diff. But I find it hard to believe that the left front wheel would make the same amount of rotations as the average of both rear wheels. So I think I don't understand it yet 🤷

And that it would not be engable 4wd: I'm not sure. The youtube vid clearly shows a button in which the middle can be locked. Probably not even locked since it won't be a difflock, but just engaged, like a parttime 4x4.
See here: https://youtu.be/EABPx7HpAbc?t=4m33s
That is a 3rd gen Vitz, but the transfer case is the same.
SwingThread starterHolland · Jul 27, 2016#13
To be more clear on the transfer case:

This is a RAV4 centre diff (in transfer case), an actual diff as you would expect on an AWD car:

Picture not included in this copy

This is the Yaris transfer case without a real diff:

Picture not included in this copy

So at least it is not a typical fulltime awd machine, as the difference in speed between front and rear axle would be limited (unlike with the RAV4 which has a centre diff for that)
RigaudRigaud, Quebec, Can. · Jul 27, 2016#14
Originally Posted by Swing ↑
@Rigaud, I know that! Thats the whole point, what do these versions do.
Similar to a Suburban I had which which I had the choice to lock it in 4x4 Low/High or select AWD. In AWD only the back wheels where full time engaged until it detected a loss of traction. My Subaru is full time AWD. I'd be curious to know what system the WRC Yaris is running, it's AWD with 350H.P. so........!!!!!
ArmstrongRacingSan Diego · Jul 28, 2016#15
AWD huh......awesome.

Could we possibly just swap in the AWD system from the rav4?

Are there any manual transmission AWD options?
CTScottUSA, CT · Jul 28, 2016#16
Originally Posted by ArmstrongRacing ↑
AWD huh......awesome.

Could we possibly just swap in the AWD system from the rav4?

Are there any manual transmission AWD options?
The AWD Vitz actually has a different floor pan than ours. The tunnel is much wider to allow the exhaust and drive shaft to coexist.
CoryMWhite Rock BC · Jul 28, 2016#17
Looks like the diff mount brackets are welded in too. If you really want a AWD Yaris, you'd probably do best to get a Vitz and rebadge it ;) . Either that or do some serious fab work.

Cheers.
SwingThread starterHolland · Jul 29, 2016#18
Yeah it would be best to import a Vitz from Japan with 4wd.

But then I would like to understand how it works. And we don't seem to completely understand it yet.
CB900F2Toronto · Jul 30, 2016#19
DAM!. I would have loved to have had a AWD sedan!
KTSTrinidad and Tobago · Jul 30, 2016#20
I recently saw two automatic 4wd transmissions locally and I am sure there are more.
CoryMWhite Rock BC · Jul 30, 2016#21
Actually from the parts diagrams it looks like the clutch is in the rear diff. Look up "Transfer assembly" here:
http://www.megazip.net/zapchasti-dly...5-ahpgk-423043

T-case is just a simple ring and pinion, no center diff. All the slippage happens in the "Coupling assembly" which I assume is either a viscous clutch, or a tiny multi-disc clutch. Could be either or both if it has a lockup.
SwingThread starterHolland · Jul 31, 2016#22
Originally Posted by CoryM ↑
Actually from the parts diagrams it looks like the clutch is in the rear diff. Look up "Transfer assembly" here:
http://www.megazip.net/zapchasti-dly...5-ahpgk-423043

T-case is just a simple ring and pinion, no center diff. All the slippage happens in the "Coupling assembly" which I assume is either a viscous clutch, or a tiny multi-disc clutch. Could be either or both if it has a lockup.
Where can I find this Coupling assembly in the parts system?

If you lookup "Transfer assembly" then you just get the outside of the transfer case. (which is indeed only ring and pinion, no diff)
CoryMWhite Rock BC · Jul 31, 2016#23
Look up the rear differential. It's in there.
CTScottUSA, CT · Jul 31, 2016#24
Originally Posted by Swing ↑
Where can I find this Coupling assembly in the parts system?

If you lookup "Transfer assembly" then you just get the outside of the transfer case. (which is indeed only ring and pinion, no diff)
The rear diff is: 41301-52100, which is the same rear diff as the 2008 US market RAV4. Even the entire assembly (41110-52010) is identical to the 08 Rav4.

The coupling for the RAV4 is different though. The RAV4 used an electromagnetic coupler allowing the rear drive to be disengaged. The NCP95 Vitz used a viscous coupler with no option for disengagement.
enviriCT · Jul 31, 2016#25
make a list :P yaris4(wd) for CTScott
SwingThread starterHolland · Aug 1, 2016#26
Originally Posted by CTScott ↑
The rear diff is: 41301-52100, which is the same rear diff as the 2008 US market RAV4. Even the entire assembly (41110-52010) is identical to the 08 Rav4.

The coupling for the RAV4 is different though. The RAV4 used an electromagnetic coupler allowing the rear drive to be disengaged. The NCP95 Vitz used a viscous coupler with no option for disengagement.
Ok I see it now.

I could not find it because I was checking the rear diff of a first gen Vitz 4wd, it does not have this coupling assembly in the rear. It may have something funny around the prop shaft, but I'm not sure if that's a coupling assembly (it's not called that way)
So it is a bit unclear on the first gen Vitz.

But for the automatic gen 2 Vitz 4wd I see the coupling assembly.
ALso the gen 3.

But the gen 3 has to button to lockup the middle (see previous page youtube), so I would assume it is an electromagnetic coupler (at least in the gen 3) instead of viscous.

And to mee it still seems if it takes the power from the left front driveshaft. So (without LSD) it would mean that if the right front wheel is loosing traction and spinning, the rest of the wheel wouldn't get any power?
CTScottUSA, CT · Aug 1, 2016#27
Originally Posted by Swing ↑
Ok I see it now.

I could not find it because I was checking the rear diff of a first gen Vitz 4wd, it does not have this coupling assembly in the rear. It may have something funny around the prop shaft, but I'm not sure if that's a coupling assembly (it's not called that way)
So it is a bit unclear on the first gen Vitz.

But for the automatic gen 2 Vitz 4wd I see the coupling assembly.
ALso the gen 3.

But the gen 3 has to button to lockup the middle (see previous page youtube), so I would assume it is an electromagnetic coupler (at least in the gen 3) instead of viscous.

And to mee it still seems if it takes the power from the left front driveshaft. So (without LSD) it would mean that if the right front wheel is loosing traction and spinning, the rest of the wheel wouldn't get any power?
Not off the front left, but rather off the ring gear of the outside of the front diff. The front diff is just the normal front diff with a modified housing for that portion of the tranny.

Correct on the 3rd gen - It does look like they added the electric lockup.
SwingThread starterHolland · Aug 1, 2016#28
Originally Posted by CTScott ↑
Not off the front left, but rather off the ring gear of the outside of the front diff. The front diff is just the normal front diff with a modified housing for that portion of the tranny.
Ok I can't see that from the partssystem, but that sounds more credible. Otherwise it would be a worthless system.
Maybe this part 41319-52011 (3rd gen Vitz) in fact turns around the driveshaft but is not connected to the driveshaft? (because it is connected to the front diff housing/ring)

So they can have a different speed, even though it looks like one axle.

Originally Posted by CTScott ↑
Correct on the 3rd gen - It does look like they added the electric lockup.
Ok, so you say that the 2nd has viscous coupling. I can believe that, but it is really hard to say from the parts catalogue (the coupling assembly really looks the same as the 3rd gen with electric coupling)

On the 1st gen there might be something funny in the propshaft, but it could just be some holder for a bearing. So I'm not sure how that one works.

To be honest I still think all generations have an electric coupling assembly with a button, but I could be very wrong about it 😁

Any setup using viscous coupling could be nice for high power awd (like a Celica GT4).
A fixed electromagnetic coupling is nice for dirt roads, not nice for high power awd (it isn't even awd anymore, it would be parttime 4x4 then). But it would be nice to have it fixed into a rear wheel drive Yaris.
CTScottUSA, CT · Aug 1, 2016#29
Originally Posted by Swing ↑
Ok I can't see that from the partssystem, but that sounds more credible. Otherwise it would be a worthless system.
Maybe this part 41319-52011 (3rd gen Vitz) in fact turns around the driveshaft but is not connected to the driveshaft? (because it is connected to the front diff housing/ring)

So they can have a different speed, even though it looks like one axle.



Ok, so you say that the 2nd has viscous coupling. I can believe that, but it is really hard to say from the parts catalogue (the coupling assembly really looks the same as the 3rd gen with electric coupling)

On the 1st gen there might be something funny in the propshaft, but it could just be some holder for a bearing. So I'm not sure how that one works.

To be honest I still think all generations have an electric coupling assembly with a button, but I could be very wrong about it 😁

Any setup using viscous coupling could be nice for high power awd (like a Celica GT4).
A fixed electromagnetic coupling is nice for dirt roads, not nice for high power awd (it isn't even awd anymore, it would be parttime 4x4 then). But it would be nice to have it fixed into a rear wheel drive Yaris.
The 2nd gen was definitely not switchable. I seriously looked into importing the parts from one to convert a US one back in late 2009, but abandoned the idea when I found out that the chassis was different (tunnel) and that you had to also import the entire AT, as the transfer case assembly is custom fit to it at the factory.
Dieselkingeurope · Nov 29, 2016#30
Try looking for parts for the Toyota Urban Cruiser (europeean version of the Scion XD)

they are mostly AWD, and all parts can be used on Yaris!

To answer the question about engaging rear diff, look at the front of the rear diff housing.
There is a bolted on multiplate coupling, activated electrically, and only when needed, and never over 40? km per hour.