ebautOriginal postKW, ON, Canada · Jun 19, 2016#1Hello all. I bought set of Aftermarket 17" wheels for my 09 hatchback off of Kijiji. I took the car to a friend's house, jacked up put the tires on realized the stock bolts weren't gonna work. It was late so we called a night, put the steelies and the snow tires back on.
So next day, I head over to Canadian Tire and they tell me I need the Toyota Aluminum wheels lug nuts which they have for $60. So i bought them but since i had the wheel in the back, i did a quick fit test and realized they weren't gonna work either. So i run back in and the attendant tells me I need spline lug nuts. so i grabbed those.
I get back to my friends we jack up the car up again and realized that yes the spline nuts do go in deeper, i can only grab about a turn and a half. So i go back to Canadian TIre and they tell me i need "tuner" lug nuts from macgard for $110 bucks. Well these did not work either same thing as the spline they go in but only grab about a turn and a half.
Has anyone ran into this issue before? The holes on the wheels have a taper so any of these lug nuts I've tried can only go in so far.. 😠 😕
Could this be the solution?
http://www.brandsport.com/grla-21138etxl.html Many thanks in advance for your help =)
Replies 44
ExiwolfmanWasaga beach · Jun 19, 2016#2 Originally Posted by
ebaut ↑ Hello all. I bought set of Aftermarket 17" wheels for my 09 hatchback off of Kijiji. I took the car to a friend's house, jacked up put the tires on realized the stock bolts weren't gonna work. It was late so we called a night, put the steelies and the snow tires back on.
So next day, I head over to Canadian Tire and they tell me I need the Toyota Aluminum wheels lug nuts which they have for $60. So i bought them but since i had the wheel in the back, i did a quick fit test and realized they weren't gonna work either. So i run back in and the attendant tells me I need spline lug nuts. so i grabbed those.
I get back to my friends we jack up the car up again and realized that yes the spline nuts do go in deeper, i can only grab about a turn and a half. So i go back to Canadian TIre and they tell me i need "tuner" lug nuts from macgard for $110 bucks. Well these did not work either same thing as the spline they go in but only grab about a turn and a half.
Has anyone ran into this issue before? The holes on the wheels have a taper so any of these lug nuts I've tried can only go in so far.. 😠 😕
Could this be the solution?
http://www.brandsport.com/grla-21138etxl.html Many thanks in advance for your help =)
make and pic of ur new wheels would help
ebautThread starterKW, ON, Canada · Jun 19, 2016#3ExiwolfmanWasaga beach · Jun 19, 2016#4You just need tuner lugs, possibly the once with allenkey style or spline.
Plus what is the hub bore Yaris is 54.1 so Ull need hub rings.
Sent from my ONE A2005 using Tapatalk
ExiwolfmanWasaga beach · Jun 19, 2016#5Picture not included in this copyPicture not included in this copy I use the black spline but for ur application the silver in pic should work.
Sent from my ONE A2005 using Tapatalk
2 attachments not included in this copy
ebautThread starterKW, ON, Canada · Jun 19, 2016#6Tried those black ones. Didn't work. They only grab about a turn and a half.
ExiwolfmanWasaga beach · Jun 19, 2016#7Did u get the right 12x1.5 pitch cos I really see no reason for the silver once not to work the black might be to wide.
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#8Yes I tried the M12x1.50 , but yeah sorry It was the black ones. I tried. Ill google those silver ones right now.
CTScottUSA, CT · Jun 19, 2016#9Measure the diameter of the smallest part of the opening (to see if the 0.62" diameter tube of the Gorilla lug nuts will enter.
Also, measure the depth from the beginning of the taper to the back side of the lug nut opening. From the picture it looks like they are really thick wheels, which would mean longer studs would need to be installed on the car.
ExiwolfmanWasaga beach · Jun 19, 2016#10That would be the issue from ur pics u probably only can fit the silver once...not much space there.
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#11Where can those silver ones be bought?
The black ones do fit, but they grab so very little, that's why I was thinking the extended Gorilla M12x1.5 might work.
Thx for the replies guys. 🙂
Picture not included in this copy ExiwolfmanWasaga beach · Jun 19, 2016#12 Originally Posted by
ebaut ↑ Where can those silver ones be bought?
The black ones do fit, but they grab so very little, that's why I was thinking the extended Gorilla M12x1.5 might work.
Thx for the replies guys.
Picture not included in this copy Picture not included in this copy
Picture not included in this copy Think u need the hex style to work.
Sent from my ONE A2005 using Tapatalk
1 attachment not included in this copy
ebautThread starterKW, ON, Canada · Jun 19, 2016#13 Originally Posted by
CTScott ↑ Measure the diameter of the smallest part of the opening (to see if the 0.62" diameter tube of the Gorilla lug nuts will enter.
Also, measure the depth from the beginning of the taper to the back side of the lug nut opening. From the picture it looks like they are really thick wheels, which would mean longer studs would need to be installed on the car.
I just measured the opening at its smallest part, i actually measured from the back, i got approximately 13mm or .52"
I think I might be screwed. 😠
ExiwolfmanWasaga beach · Jun 19, 2016#14 Originally Posted by
ebaut ↑ I just measured the opening at its smallest part, i actually measured from the back, i got approximately 13mm or .52"
I think I might be screwed. 😠
They would not make the wheels if one could not get the wheel nuts contact they guy u got the wheels from ask what he used also take one wheel with u to a specific wheel shop not crappy tire lol
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#15 Originally Posted by
Exiwolfman ↑ They would not make the wheels if one could not get the wheel nuts contact they guy u got the wheels from ask what he used also take one wheel with u to a specific wheel shop not crappy tire lol
Sent from my ONE A2005 using Tapatalk
I enquired to the guy i bought them from and he said it was some shop in Scarborough. Not sure where.
I also went to two "specialized" wheel shops but no luck.
ExiwolfmanWasaga beach · Jun 19, 2016#16Danforth street and Victoria Park I know there was a wheel shop and the one I think he is talking about is Superior Tire
Sent from my ONE A2005 using Tapatalk
ExiwolfmanWasaga beach · Jun 19, 2016#17Superior Tire should definitely have it Google locations few around Toronto area.
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#18Superior tire? Ill give them a call tomorrow. Thank you.
ExiwolfmanWasaga beach · Jun 19, 2016#19 Originally Posted by
ebaut ↑ Superior tire? Ill give them a call tomorrow. Thank you.
Your welcome...and let us know how it worked out.
Sent from my ONE A2005 using Tapatalk
ExiwolfmanWasaga beach · Jun 19, 2016#20Also looks like Superior Tire deals with TenzoR wheels so it's best place to check they specialize in aftermarket wheels.
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#21Keeping my fingers crossed. Ill call them tomorrow. Hopefully i can post some cool pictures later on in this thread with some cool rims 😎 🙂
Cheers
ExiwolfmanWasaga beach · Jun 19, 2016#22 Originally Posted by
ebaut ↑ Keeping my fingers crossed. Ill call them tomorrow. Hopefully i can post some cool pictures later on in this thread with some cool rims 😎 Picture not included in this copy
Cheers
Cool 😎
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 19, 2016#23Armchair detective work...
So, i measured the inside of the hole on the wheel is .62 diameter. So, if what username Texacott45 says here is true.
Originally Posted by
texascolt45 ↑ I know the lugs are the same as my Tacoma,but anybody know what size and thread?sorry duh,found it.12mm X 1.5
Then based on this review.
Originally Posted by Warren
This style of lug nut was required for the installation of conical seat aluminum American Muscle GT4 (18 x 9) wheels on my 5 lug Toyota Tacoma, as the factory studs are short. These lug nuts enabled the capture of all threads for a good fit and a safe install in this application. The spline system gets you a theft protection addition with all lugs looking the same. A splined installation/removal socket is required for this application. The one I received works well and is also part of a theft protection system in this application.
http://www.brandsport.com/grla-21138et.html And because the spline nut i used earlier is stopping right on the taper inside the hole.
Originally Posted by
Exiwolfman ↑ Attachment 57262
but by using the Gorilla nuts that extra .25 extension at the bottom at .62" wide, would fit perfectly through the opening.
Picture not included in this copy That makes me think those Gorillas have to be the answer or one of them.
ebautThread starterKW, ON, Canada · Jun 19, 2016#24ebautThread starterKW, ON, Canada · Jun 20, 2016#25I called Superior in Mississauga, explained the issue. He asked me a few questions, then he said that I need Gorilla PN 21038. He was to call me back and get me a quote but he never did. Online prices in Canada for those nuts are freaking nuts, so i ended up ordering from the US a set that includes the lock nuts and hex keys for $39.99
Thanks all.
ExiwolfmanWasaga beach · Jun 20, 2016#26 Originally Posted by
ebaut ↑ I called Superior in Mississauga, explained the issue. He asked me a few questions, then he said that I need Gorilla PN 21038. He was to call me back and get me a quote but he never did. Online prices in Canada for those nuts are freaking nuts, so i ended up ordering from the US a set that includes the lock nuts and hex keys for $39.99
Thanks all.
Cool....crossed fingers
Sent from my ONE A2005 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 20, 2016#27If those dont work im setting those god damn wheels on FIRE!!! 😈
😛😆
ExiwolfmanWasaga beach · Jun 20, 2016#28 Originally Posted by
ebaut ↑ If those dont work im setting those god damn wheels on FIRE!!! 😈
😛😆
Lmfao if u do film it haha
Sent from my ONE A2005 using Tapatalk
ThebigwicksLouisiana · Jun 21, 2016#29I see no reason those spline drives won't work unless you are running spacers. I doubt the back pad of that wheel is that thick. I'm running 10 mil spacers and still can get plenty threads with my spline drives. If worst comes to worst you can always order extended studs.
justjesusOrange County · Jun 22, 2016#30i had a similar issue when I bought used wheels for my 96 Jeep Cherokee. The lug nuts were not getting enough tread. Did lots of looking online, and actually ordered smaller sets (of 4) and tried a few before finding the "extended length" Gorillas. Bought them, and they worked.
You should be fine. Just make sure to slip them through the holes before you try and mount them. For 2 reasons. (1) make sure ALL holes clear the lug nuts. A couple of mine had to be cleaned up a tad. And (2) make sure the tips don't extend past the wheel mounting surface! If they do, your wheels won't seat properly.
ebautThread starterKW, ON, Canada · Jun 29, 2016#31ExiwolfmanWasaga beach · Jun 29, 2016#32 Originally Posted by
ebaut ↑
Looking good, glad u got it all sorted out.
Sent from my ONEPLUS A3000 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 29, 2016#33Thanks man, im glad i was able to get the proper lug nuts. I was worried there for a bit. 2 local tire shop guys were helpless. WTF??
No rubbing at all. Takes corners like a champ. 🙂
I even got myself a torque wrench 😉
ExiwolfmanWasaga beach · Jun 29, 2016#34 Originally Posted by
ebaut ↑ Thanks man, im glad i was able to get the proper lug nuts. I was worried there for a bit. 2 local tire shop guys were helpless. WTF??
No rubbing at all. Takes corners like a champ. Picture not included in this copy
I even got myself a torque wrench 😉
Sweet now u need to lower it lol
Sent from my ONEPLUS A3000 using Tapatalk
ebautThread starterKW, ON, Canada · Jun 29, 2016#35TRD springs? mmmm.... 🤷
ExiwolfmanWasaga beach · Jun 29, 2016#36 Originally Posted by
ebaut ↑ TRD springs? mmmm.... 🤷
Tein springs 2 inch drop all around, TRD is. 5 front and 1.5 rear.
Go low or go home lol
Sent from my ONEPLUS A3000 using Tapatalk
kimonaHuntington Bch, CA · Jun 29, 2016#37Wheels look pretty good! Rubber looks a bit short on stock suspension. 205/40/17's???
ebautThread starterKW, ON, Canada · Jun 29, 2016#38Yes Kimona, 205/40/17.
ebautThread starterKW, ON, Canada · Jul 1, 2016#39Im buying new tires I blew a tire going over a lip on my driveway. I believe this tires are old.
Would 215 40 17 be a better choice, less chance of anything blowing and/or better looks?
ExiwolfmanWasaga beach · Jul 1, 2016#40 Originally Posted by
ebaut ↑ Im buying new tires I blew a tire going over a lip on my driveway. I believe this tires are old.
Would 215 40 17 be a better choice, less chance of anything blowing and/or better looks?
Large
Sent from my ONEPLUS A3000 using Tapatalk
kimonaHuntington Bch, CA · Jul 1, 2016#41 Originally Posted by
ebaut ↑ Im buying new tires I blew a tire going over a lip on my driveway. I believe this tires are old.
Would 215 40 17 be a better choice, less chance of anything blowing and/or better looks?
205/45/17 would be the proper size on stock suspension... and they work very well with a mild to moderate drop.
thebarberGrand Rapids, MI · Jul 2, 2016#42Marken performance on Ottawa should have lugs tahtll work in stock. I know I've gone to them in the past and they have lots
RigaudRigaud, Quebec, Can. · Jul 2, 2016#43 Originally Posted by
thebarber ↑ Marken performance on Ottawa should have lugs tahtll work in stock. I know I've gone to them in the past and they have lots
You should have read before posting. He found what was needed and the wheels are on. lol
RigaudRigaud, Quebec, Can. · Jul 2, 2016#44 Originally Posted by
ebaut ↑
Really nice wheels.......looks great.
thebarberGrand Rapids, MI · Jul 2, 2016#45 Originally Posted by
Rigaud ↑ You should have read before posting. He found what was needed and the wheels are on. lol
Was trying to help a desperate local....noticed there were several pages after posting and was too lazy to change my post