brushforhireOriginal postJohnstown, PA · Jun 6, 2016#1Well I have decided to part out most everything on my car. At this point I am probably looking to keep the engine and some of the other performance parts, but it never hurts to shoot me an offer.
So mostly all the trim and other other odds and ends are up for grabs at this point. Just ask if you want something in particular. Someone want all the plaid interior?
Picture not included in this copy Picture not included in this copy Picture not included in this copy I will try and get pictures of everything as I go along tearing it apart, but here are some quick prices:
Coilovers shipped in the US - $550
They will come with the oem strut tops and mounts, so these are ready to bolt right in. They have less than 1000 miles on them. One rear strut has the paint rubbed down a little.
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy 2zrfe engine with a/c compressor, alt, starter, wiring harness (auto), and ECU (auto)- $600 pickup, probably around $800 shipped freight.
RPM longtube header and midpipe (slip joint welding solid) and DC sports axleback form the xD - $850 shipped in the US
I WOULD DO $1500 SHIPPED FREIGHT, THE ENGINE AND EXHAUST.
1nzfe engine - $150 pickup, probably $250 shipped freight
Upper dash panel - $150 shipped US
Headliner with plaid wrap - $150 pickup, probably like $225 shipped freight (because of size)
Picture not included in this copy 60/40 rear bench seat and all plastic trim for it - $250 pickup / $350 shipped UPS
Front seats - $100 each pickup / $150 shipped each
Painted parts around radio and a/c controls - $50 shipped
Black trim pieces on either side of painted parts - $20 shipped each
Upper glove box lids - $40 shipped US each
Lower glove box - $45 shipped US
Entire carpet, decent condition - $175 shipped
Both rear 8" custom fiberglass sub boxes (no subs) - $75 shipped in the us
$350 shipped with the subs. The subs run $200 each on crutchfield, where I bought them from.
Picture not included in this copy Center console - $60 shipped US
Front calipers from xD/Corolla, pads, and Yaris SE front rotors. Coated in G2 black 2 part caliper painted. Less than 1500 miles - $250 shipped in
the us.
MI red brakes SS lines, less than 1500 miles - $100 shipped us
Let me know if there are any other specifics you are looking for.
11 attachments not included in this copy
Replies 64
91mustangSmithfield, VA · Jun 6, 2016#2Hey, I'm Interested in the coil overs and rear sway bar.
brushforhireThread starterJohnstown, PA · Jun 6, 2016#3I would to the coilovers at $550 shipped in the US, and the rear sway bar at $150 shipped in the US. Both bought new and have only like 1000 miles on them.
Also EVERYTHING is up for grabs. Engine, RPM header, midpipe, DC sports muffler, etc.
Just let me know what you are looking for.
I also have an extra 1NZFE engine if anyone is interested in an extra to build for boost or something.
CrankyOldManWest Michigan · Jun 6, 2016#4I'm not sure on the timing of when I can buy, but I'm interested in the whole exhaust. Possibly the stainless lines, too. Are the front lines toast?
brushforhireThread starterJohnstown, PA · Jun 6, 2016#5Front brakes, calipers, rotors, pads, lines, everything are all good. Really everything behind the front rails is good. Only the intake manifold got damaged, as far as I can tell so far. The engine and everything still starts.
bail_wBay Area, CA · Jun 6, 2016#6How much for driver seat belt?
brushforhireThread starterJohnstown, PA · Jun 6, 2016#7$35 shipped in the US.
91mustangSmithfield, VA · Jun 7, 2016#8You have pictures of the coil overs?
brushforhireThread starterJohnstown, PA · Jun 7, 2016#9I will try and get some pics up, asap.
fredovvtiSabana Grande, PR · Jun 7, 2016#10How much for the DC Header?
brushforhireThread starterJohnstown, PA · Jun 7, 2016#11I don't have a DC Header. It is the RPM long tube header and midpipe for 2zrfe. I have the dc sports muffler for the Scion xD, but fits up the the exhaust. I don't think it would bolt to the yaris exhaust, though.
bail_wBay Area, CA · Jun 7, 2016#12 Originally Posted by
brushforhire ↑ $35 shipped in the US.
Can you show me a picture of it? To make sure that we are on the same page.
Thanks!
fredovvtiSabana Grande, PR · Jun 8, 2016#13And you sell the antenna base?
texascolt45groves texas · Jun 9, 2016#14i'd be interested in the stock engine.how many miles,etc.
brushforhireThread starterJohnstown, PA · Jun 9, 2016#15Antenna base would be $70 shipped in the US
The stock 1NZFE engine has 132k miles on it. I owned it from 0 miles. Oil changes done religiously every 3-5k miles. I worked at a Toyota dealer, so they always did everything to it. Never had any issues, and ran like a champ.
texascolt45groves texas · Jun 11, 2016#16heck try to sell it local,but i'm 77619 zip code.shipping is such a pain I know.
brushforhireThread starterJohnstown, PA · Jun 11, 2016#17I will get pics up next week, when I get back from vacation. Gonna tear the car down more.
justplainbobWest Harrison, NY · Jun 14, 2016#18I'm looking for the map light assembly + the plug from the stock wiring harness for it. I deleted mine for a custom GPS set up and used the wiring for a cigarette lighter plug ;-)
bobby0600Oklahoma · Jun 25, 2016#19Does the radio have the CD player?
brushforhireThread starterJohnstown, PA · Jun 25, 2016#20Radio is already gone.
91mustangSmithfield, VA · Jul 12, 2016#21Negotiable on the rear sway bar?
brushforhireThread starterJohnstown, PA · Jul 12, 2016#22I'm open to offers on everything.
baseballfan416Milwaukee, Wi · Jul 29, 2016#23trying to locate a passenger side caliper bracket with moveable sliding pins/intact boots. My zip is 53223.
rningonfumesSoCal · Jul 29, 2016#24If you have remote locks, would you mind pulling out the associated parts?
sr20-thojMN · Jul 29, 2016#25Front reinforcement bar looks to be in decent shape. How much did u want for it? That's if it's not bent that is.
ezhacker1San Francisco · Jul 30, 2016#26whats the volume for the sub boxes. they look great.
brushforhireThread starterJohnstown, PA · Aug 1, 2016#27Okay quick answers:
I do not have the original caliper parts, only the bigger XD brake parts.
Not sure what would be related to the remote lock that you need for your project.
Front reinforcement bar does look straight to me, also $60 shipped in the USA
I do believe the volume of the sub boxes were right around .5 cu foot each. And that you for the compliment. If you were interested in the subs and boxes, I could cut you a good deal. Edit: If anyone is interested I would do the sub boxes with the JL subs in them for $375 shipped. The subs alone were $400. They are the JL 8W3v3-4 subs. They sound amazing.
rningonfumesSoCal · Aug 1, 2016#28Hi.
To elaborate, can you unlock your car using a clicker like one of these:
Picture not included in this copy or
Picture not included in this copy ...that was from the factory or dealorship (not aftermarket).
I'm trying to enable this function from this thread:
Add remote to factory keyless. I mainly need that box that is in the left C-pillar.
And if so . Would you be willing to let me buy the parts that will enable it for my car which has power locks but doesn't have the box that will let me use remote lock.
CTSCOTT if you're reading, do I need anything else? I read in that same thread I linked to that there was some talk about immobilizer?
dogsridewithUSAnotCA · Aug 2, 2016#29How much damage to the rear bumper and its cover?
WeeYariGeorgetown, Ontario, Canada · Aug 2, 2016#30 Originally Posted by
dogsridewith ↑ How much damage to the rear bumper and its cover?
Picture not included in this copy .
brushforhireThread starterJohnstown, PA · Aug 2, 2016#31 Originally Posted by
rningonfumes ↑ Hi.
To elaborate, can you unlock your car using a clicker like one of these:
Picture not included in this copy or
Picture not included in this copy ...that was from the factory or dealorship (not aftermarket).
I'm trying to enable this function from this thread:
Add remote to factory keyless. I mainly need that box that is in the left C-pillar.
And if so . Would you be willing to let me buy the parts that will enable it for my car which has power locks but doesn't have the box that will let me use remote lock.
CTSCOTT if you're reading, do I need anything else? I read in that same thread I linked to that there was some talk about immobilizer?
Mine did have that remote/key in one combo. I actually have that little box up on ebay right now.
dogsridewithUSAnotCA · Aug 2, 2016#32Thanks for re-posting that photo W.Y. (and also for finding those good Ultragauge links yesterday!)
I'm seeing paint missing and a gap...some of which may be due to the quarter panel dent. But most of the bumper doesn't show...and I don't know if bfh is showing the best side or the worst.
WeeYariGeorgetown, Ontario, Canada · Aug 2, 2016#33That is the worst side. Search for his totaled my car thread for all the pictures he posted of it.
dogsridewithUSAnotCA · Aug 2, 2016#34! A perfect blue door on an Absolutely Red and I've got a Caribbean taxi cab..how's the rear hatch? (I'm in central PA, so don't need shipping.)
Picture not included in this copy
brushforhireThread starterJohnstown, PA · Aug 2, 2016#35The bumper is gone, it had a huge hole in it. The hatch it actually looking really good, only a small tiny little bend on the left lower side. I barely even noticed it, I'm sure it can be bent back. Even if not it does not affect the functionality of it. You looking for a passenger door also? How about a plaid headliner? LoL.
Edit: Or how about the entire engine swap and exhaust?
ern-dizCA all day · Aug 2, 2016#36 Originally Posted by
dogsridewith ↑ ! A perfect blue door on an Absolutely Red and I've got a Caribbean taxi cab..how's the rear hatch? (I'm in central PA, so don't need shipping.)
Picture not included in this copy
That is a classic Tercel. My cousin had one lowered, on Enkei 5 stars with a booming system back in the day lol.
rningonfumesSoCal · Aug 2, 2016#37Do you have the link the the ebay sale for the box sir?
brushforhireThread starterJohnstown, PA · Aug 2, 2016#38 Originally Posted by
rningonfumes ↑ Do you have the link the the ebay sale for the box sir?
Linky If it's not cool to post links like this, I will gladly take it down.
rningonfumesSoCal · Aug 2, 2016#39Gracias
brushforhireThread starterJohnstown, PA · Aug 11, 2016#40bump for new pics, and updated pricing and the such.
CreepinMarietta · Aug 11, 2016#41looking for the bin next to the drivers leg that covers the fuse panel. And if you would sell just the one of the blanks that go in the center console where people put the aftermarket fog switch id buy them both
CrankyOldManWest Michigan · Aug 11, 2016#42 Originally Posted by
brushforhire ↑ I WOULD DO $1500 SHIPPED FREIGHT, THE ENGINE AND EXHAUST.
Bump for an incredible deal! I bought a long block 2ZR and I've spent at least this much trying to source all the bits I need to make it work, not including the exhaust! That ate up my budget for the long tube header and mid pipe, so I'm making do with what I can scrounge up.
For reference, I bought a used Blitz S/C kit for that much and got a bit more power with a LOT less reliability. According to resident guru CTScott, the 2ZR is the best bang for your buck when looking at S/C, turbo or 2ZR swap. Please, someone buy this thing before I sell a kidney and buy it!
brushforhireThread starterJohnstown, PA · Aug 11, 2016#43 Originally Posted by
Creepin ↑ looking for the bin next to the drivers leg that covers the fuse panel. And if you would sell just the one of the blanks that go in the center console where people put the aftermarket fog switch id buy them both
The bin is already gone, but are you talking about the blanks near the aux port?
dumbo0San Francisco, CA · Aug 13, 2016#44Is the front left axle shaft assembly good?
David CMontreal · Aug 13, 2016#45Is the sway bar still up for sale ?
oxideWPG CAN · Aug 14, 2016#46pm sent
brushforhireThread starterJohnstown, PA · Aug 14, 2016#47Front axle is good
edit: Sway bar sold.
David CMontreal · Aug 14, 2016#48I sent you a PM
brushforhireThread starterJohnstown, PA · Aug 24, 2016#49Picture not included in this copy For reference for someone.
1 attachment not included in this copy
94lstegHighland, NY · Sep 19, 2016#50Do you have the rear cargo cover?