Yarisworld Archive

Dabuu's NCP131

150 posts · 68,840 views · page 1 of 3

DabuuOriginal postNo Bueno Park, CA · Jun 1, 2016#1
Car guy problems.

Picture not included in this copy

When you have the parts, but don't even have the car yet. 🤣


Hey guys, my name is Davis. I've always wanted an NCP91 Yaris, but I'm now looking to buy a 3rd gen Yaris. This'll be my build thread whenever I buy it. Hopefully, the info here will be of use.

But of course, this is where I'll pic whore because pic whore.

The parts in the above picture:

Netz Front Emblem - 75301-52100
TRD Drop In Air Filter - PTR43-00072
Tanabe Exhaust - T70121A
TRD Japan Quick Shifter - MS205-52003

*Note: Since I don't have the car, I have no way to verify if some of these parts fit. I've been researching past threads on fitment and I've been cross referencing parts between US and Japan 2012-2016 cars.



Pics of my past rides:

2003 ZZW30 2ZZ-GE Swapped MR2 Spyder:

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

2000 UZS160 5MT Swapped GS400

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Current Daily:

2014 ZVW41W Prius v Three:

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

I'm not new to modifying cars, but I am new to the Yaris chassis. I'll do my best to use the search function, so please don't be too harsh when I do ask a question lol.

Prius is a nice daily, but I'm itching to get back into an MT!

Wheels and Suspension are on order, stay tuned! 🤘

Replies 149

tarkusYYZ · Jun 2, 2016#2
That MR2 looks phenomenal!! And how do you juice up a Prius? Bigger electric motors, batteries, custom firmware?
BTW for maximum sporty fun factor, I would recommend the 2nd generation Yaris over the 3rd gen.

Sent from my LG-D801 using Tapatalk
DabuuThread starterNo Bueno Park, CA · Jun 2, 2016#3
Originally Posted by tarkus ↑
That MR2 looks phenomenal!! And how do you juice up a Prius? Bigger electric motors, batteries, custom firmware?
BTW for maximum sporty fun factor, I would recommend the 2nd generation Yaris over the 3rd gen.

Sent from my LG-D801 using Tapatalk
Thank you! The MR2 was a fun car, but it was becoming a huge money pit. I sold it because my son was born and needed a bigger car. Thats when I picked up the GS, it was supposed to the daily, then I had an itch and turned it into a drift car lol. Throwing a Supra R154 manual trans behind that V8 was fun for awhile, but that trans shifted like shit. Biggest reason why I got rid of it, and now looking for a Yaris. The Prius is stock for the most part, all modifications were in the handling department.

Main reason why I'm going with a 2015+ model vs 2007-2011.

- SE; I want a 4 door, I want a manual trans, rear disc brakes, projector headlamp, and foglights.
- Longer wheel base.
- Lower roofline/lower drag coefficient.
- Midcycle refresh looks nice inside and out. I love how angry it looks!

Plus it's just newer, can't beat that piece of mind knowing it won't need anything.
ern-dizCA all day · Jun 2, 2016#4
Really cool cars.

I look forward to updates!
yarisugiハワイ · Jun 2, 2016#5
You may find a few manual transmission SE in the entire US. (Less than a handful) Or see if Kalispel is willing to sell his car. So funny to see parts piling up for a vehicle you don't have yet. What commitment!
DabuuThread starterNo Bueno Park, CA · Jun 2, 2016#6
In case anyone wanted to see how the TRD QS looked. It's a full shift cage replacement.

I bought a QS because I had one on my MR2 and it greatly improved the shift feel. I hope it goes the same with the Yaris.

Picture not included in this copy

So stoked that I can reuse my TRD Duracon Shift Knob that was on my MR2.

Picture not included in this copy
DabuuThread starterNo Bueno Park, CA · Jun 3, 2016#7
Originally Posted by ern-diz ↑
Really cool cars.

I look forward to updates!
Thanks! Hopefully I don't disappoint!

Originally Posted by yarisugi ↑
You may find a few manual transmission SE in the entire US. (Less than a handful) Or see if Kalispel is willing to sell his car. So funny to see parts piling up for a vehicle you don't have yet. What commitment!
Tell me about it! Probably gotta ship one to Cali just like Kalispel had to ship his.

Lol yeah, I figured I'd order the parts so I can commit to the Yaris. Yaris parts are so much cheaper than my past projects, so it doesn't feel as big of a hit! Just a few more parts and I should be done. All my past projects were....well just that, projects. I'm trying to stay true to the "Keep It Simple Stupid" philosophy, so I can enjoy the car instead of having it on jack stands during half of my ownership. 😛
tomsimmons82Sutton Surrey · Jun 8, 2016#8
Any idea if that QS would be compatible with the 1NR FE 6 speed gear box?
CrankyOldManWest Michigan · Jun 8, 2016#9
I'm interested in seeing the TRD shifter body vs the stock. I went with a TWM short throw arm and the MicroImage engine bay short throw bracket. VERY short throws!
fnkngrvIn The Hotbox · Jun 8, 2016#10
I am very curious about the shifter cage as well.
DabuuThread starterNo Bueno Park, CA · Jun 10, 2016#11
Originally Posted by tomsimmons82 ↑
Any idea if that QS would be compatible with the 1NR FE 6 speed gear box?
That I'm not too sure. See my response to Crankyoldman below. I wouldn't see why not. I believe your chassis code is in the list for parts: http://www.trdparts.jp/list_vitz13x.html

Originally Posted by Thirty-Nine ↑
SWEET! I love the fact you tracked a Prius v!
It was fun chasing faster cars down, the only downside was the nanny systems getting in the way!! 👎

Originally Posted by CrankyOldMan ↑
I'm interested in seeing the TRD shifter body vs the stock. I went with a TWM short throw arm and the MicroImage engine bay short throw bracket. VERY short throws!
I believe the shifter cages are the same, there are no signs of it being a TRD product besides the installation manual that came with it. The only change that I'm aware of is that the fulcrum point on the lever is changed. Not too sure if the mount bushings are different.

I'll definitely take some pictures of them side by side though.

I'm not after super short throws, I'm just looking to tighten things up. 👍

Originally Posted by fnkngrv ↑
I am very curious about the shifter cage as well.
Now there's a familiar face from TMT!
DabuuThread starterNo Bueno Park, CA · Jun 10, 2016#12
Some new goodies came in. I've been debating between going Coilovers or Lowering Springs and Strut/Shock combo. I ended up deciding on the latter, I mean for the price of cheap coilovers, you can buy a legit setup.

Bilstein B8 Performance (NCP91 '07-'11)

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

I couldn't find any reviews on these specifically on the Yaris chassis, but I've heard many good things about them on other vehicles, so I didn't spend too much time on here researching it...impulse buy lol.

The B8s are designed to be used with lowering springs and the dampening is fixed. I'll be pairing these up with some RS*R Sus Down Springs specifically for the NCP131 which lowers the car:

F: 30mm - 25mm / 1.2in - 1.0in
R: 25mm - 20mm / 1.0in - 0.8in

F: 2.80kg/mm
R: 2.85kg/mm

So why did I decide against coilovers?

Simply put, I want to enjoy the car.

My previous projects had coilovers, they're nice with all the adjustability, but I kept finding myself going as low as I can just because I could. I knew it hurted performance, but damn it looked sick. And 32way adjustment? Awesome. I'll just go full stiff and never touch them again.

Even if I was trying to dial the car at the track I didn't know what I was doing. For all I knew I probably was fighting the car with every change I made.

Throw adjustability out the window, and then you can just focus on the driver, no other variable from ride height, spring preload, dampner setting, etc.

Yeah, I want to become a better driver too. What better way than to go back to the basics!
ern-dizCA all day · Jun 10, 2016#13
Where you did you pick the shocks/struts up from?
DabuuThread starterNo Bueno Park, CA · Jun 10, 2016#14
Best price I could find was on Ebay from the seller: autoanything.
DabuuThread starterNo Bueno Park, CA · Jun 17, 2016#15
New stuff.

RS*R Down Sus Lowering Springs.

Part #: T345DF

F: 30mm - 25mm / 1.2in - 1.0in
R: 25mm - 20mm / 1.0in - 0.8in

F: 2.80kg/mm
R: 2.85kg/mm

Picture not included in this copy

Packaging wasn't so good, the springs were rubbing each other the entire way from Japan, there's no bare metal showing, but the powder coat is pretty marred up. Oh well, it's only cosmetic.

An oldie, but goodie.

Enkei RPF1
15x7 +41 in Black.
9.6 lbs each

Picture not included in this copy

Picture not included in this copy

I don't care how played out these wheels are. I've always wanted a set (I love how cheap 15" wheels are ). I was never fond of black wheels, but I've been getting lazy with cleaning off the brake dust on my previous car. So I figured why not, at least it won't be too noticeable if I did take too long to clean them. I'm on the fence, but really leaning towards some 205/50s. Wide contact patch and it'll lower the car .3". We'll see once I take the car out to the track.

Even though I have most of the mods, I'm not planning to throw them all on at once. I'd like to get used to the stock set up before I touch anything. The mods will progress in stages. 👍
Bluevitz-rsOshawa, Ontario, Canada · Jun 18, 2016#16
RPF1's are still one of the lightest 15s on the market. I love mine paired with 195/50 RE11a tires. Rim and tire weigh in together at 32lbs.
enviriCT · Jun 18, 2016#17
nice for going all out on quality!
YarTedMapleRidge B.C · Nov 15, 2016#19
Looks good,Congrats have fun
ern-dizCA all day · Nov 15, 2016#20
That's a sharp interior. Congrats and enjoy.
Captain YarisSoFloYo · Nov 16, 2016#21
Congrats! I can't wait to see it with everything installed.
DabuuThread starterNo Bueno Park, CA · Nov 19, 2016#22
Thank you everyone! 350 miles so far. I love how peppy the 1NZ feels. The chassis is tossable, the poor Turanza EL400s can't help but scream for mercy. Being a Toyota guy, I'm quite surprised by how much feedback is given from the steering wheel. My only gripe is the pedal positioning, it's difficult to heel toe unless your going in hot and are aggressive with the brakes, or, maybe I just suck at driving (most likely). The brake pedal position is much higher than the gas pedal, so if your trying to heel toe casually on your commute, reaching for the gas pedal is a total guessing game it feels like. I'll need to figure out a solution because it drives me nuts, I do have a G's accel pedal, but the bolt pattern is different...

Anywho.

Originally Posted by ern-diz ↑
That's a sharp interior. Congrats and enjoy.
The gauge cluster has to be my favorite! Love looking at it.

Originally Posted by Captain Yaris ↑
Congrats! I can't wait to see it with everything installed.
Soon! 👍

Weighed the car last night, 2411 lbs. Wished my car laid off all the croissants before shipping out of France. Oh well. Most of the weight is probably from the extra standard safety features.

2017, SE, 5MT, Full tank of gas (don'the mind the fuel gauge in this picture) and brochures in the glove box.

Picture not included in this copy

F: 61.21%
R: 38.78%

Also picked up a brand new turd rear sway bar. I plastidipped it black because I don't want the attention.

Picture not included in this copy
tarkusYYZ · Nov 19, 2016#23
Originally Posted by Dabuu ↑
Thank you everyone! 350 miles so far. I love how peppy the 1NZ feels....
Weighed the car last night, 2411 lbs. Wished my car laid off all the croissants before shipping out of France. Oh well. Most of the weight is probably from the extra standard safety features
This is where the Gen 2 Yaris wins out. It's lighter, with a more immediate and responsive feel than the 3rd generation.



Sent from my LG G2 with CM13 using Tapatalk
DabuuThread starterNo Bueno Park, CA · Nov 19, 2016#24
Originally Posted by tarkus ↑
This is where the Gen 2 Yaris wins out. It's lighter, with a more immediate and responsive feel than the 3rd generation.



Sent from my LG G2 with CM13 using Tapatalk
Why do you keep bringing up the same point? 🤷
tarkusYYZ · Nov 20, 2016#25
Most people will probably repeat certain points in different threads, and that's the nature of bulletin boards in general. In this case I commented on an interesting point you made. And I'm very pleased to see that you're enjoying your new Yaris and I'm following your progress with great interest. Picture not included in this copy

Sent from my LG G2 with CM13 using Tapatalk
Captain YarisSoFloYo · Nov 20, 2016#26
I've found the same problem with heel/toe driving. What I've learned to do is just be quick with my feet and also I've learned that 2000rpms corresponds with: 2nd gear - 20mph, 3rd gear - 30mph, 4th gear - 40mph. This way I can blip the throttle with out doing a full gauge scan. Just be fast, haha! Glad you are enjoying the car. BTW, any new pictures of exterior?
DabuuThread starterNo Bueno Park, CA · Nov 20, 2016#27
Originally Posted by tarkus ↑
Most people will probably repeat certain points in different threads, and that's the nature of bulletin boards in general. In this case I commented on an interesting point you made. And I'm very pleased to see that you're enjoying your new Yaris and I'm following your progress with great interest. Picture not included in this copy

Sent from my LG G2 with CM13 using Tapatalk
Yeah we are on a forum, and everyone has a right to their opinion, but I noticed that you kept mentioning the 2nd Gen in various 3rd Gen threads that I posted in. I read your opinion the first time, and second, and so on.

Let's get back on track now, mods aren't going to post themselves. 🤘

Originally Posted by Captain Yaris ↑
I've found the same problem with heel/toe driving. What I've learned to do is just be quick with my feet and also I've learned that 2000rpms corresponds with: 2nd gear - 20mph, 3rd gear - 30mph, 4th gear - 40mph. This way I can blip the throttle with out doing a full gauge scan. Just be fast, haha! Glad you are enjoying the car. BTW, any new pictures of exterior?
I might make some spacers to bring the accel pedal out a bit, but for now I guess I'll just drive fast, because racecar!

Haven't had a chance to take any nice pictures of the car, and it just rained today in Socal. Cars pretty dirty, but I'll try to take some soon!


Since it was raining, I figured I would install the TRD Quick Shifter.

Removed the center console. Mostly clipped on, there was one 10mm bolt hidden underneath the rear cup holder. Once the bolt is removed, the console pops off. Don't forget to disconnect the Trac Off connector.

Picture not included in this copy

If you notice the shifter cables they have a spring loaded release that you turn 180 degrees clockwise to release and counterclockwise wise to tighten. I've never dealt with this style before, so it took me awhile to release it from the cage. 😆

Caution: If you spin the release more than 180degrees you risk damaging the spring that is inside. I'm not good at reading Japanese, but this got my attention. It would suck breaking a shift cable, these guys are expensive.

Picture not included in this copy

One cool thing to note, the left cable that controls side to side is adjustable. You can adjust where side to side center is by unclipping 2 locking clips. TRD manual says to make sure that the measurement from the front of the cage to the middle of the pivot pin is 164.5mm, or about 6.475", I just rounded to 6.5". Shifter is pretty damn centered. 👍

TRD (left) vs Stock (right):

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Hard to tell anything is even modified :) Shifter feels more positive, a little more snick snick. Throws are a little bit shorter, which I like. I dislike aftermarket shifters that are so short you're not sure if it's 3rd or 5th you're going in to. Best part is I have not noticed any increased effort in shifting. It was a pleasure to drive around town before, but now I'm looking for any excuse to go out and putt around town with this engagingly slick mod.
DabuuThread starterNo Bueno Park, CA · Nov 20, 2016#28
I guess this'll have to do Captain! Instagram pic with a shit load of filters showing Yaris and Prius meeting each other for the first time.

Picture not included in this copy

Magnetic Grey Metallic.
Captain YarisSoFloYo · Nov 20, 2016#29
Nice write up, it looks great. God, that color is amazing! I love my white as its really JDM looking, but your color looks great!
DabuuThread starterNo Bueno Park, CA · Nov 20, 2016#30
Thanks! I didn't get into as much detail as I wanted to though because of time constraints.

Can't go wrong with Super White. I wanted a color with the least maintenance, and it blends in with the rest of traffic, 2 for 1! 👍

Just snapped this after leaving Target. Grey hides the dirt pretty well. 👍

Picture not included in this copy
yarisugiハワイ · Nov 21, 2016#31
Since you have the 2017 model, does that mean that you have the safety sense c? i like that color, too! i wonder if the short shift that attaches above the transmission will work for this model, too.
DabuuThread starterNo Bueno Park, CA · Nov 21, 2016#32
You're correct, mine is equipped with TSS-C. I could care less for it.

Best part though for anyone wondering, if you hold the TRAC OFF button for loner than 3 seconds, it disables; TRAC, VSC, and Pre-Collision Assist (auto brake).

Lane Departure is conveniently On or Off. As in, if you turn it Off and it stays off the next key cycle, unlike TRAC OFF.

I couldn't get a clear picture of the front camera, but here's the dash with the above mentioned assists off (lane departure only illuminates when it'starts on).

Picture not included in this copy

Not sure if the NCP90 TRD shifter linkage would work or not...I wondered the same thing, but since TRD Japan has the cage listed, I decided to spend the money, they designed it for a reason I kept telling myself...lol totally worth it once installed.
Small update:

Installed my TRD Duracon shifuto knoobu! Factory knob looks great, but the feel is meh. Like the quality feels cheap and it's pretty light. The turd knob is a bit heavier and I like the slick feel of the Duracon. Since the TRD is a lot shorter, I had to space the boot collar up an inch, or the collar would rattle around. I had some 12mm hoses lying around, so I cut an inch or so to put in between the boot collar and the lever collar. Shifter feel keeps on improving. Can't wait to throw some MT90 in this trans.

Picture not included in this copy
DabuuThread starterNo Bueno Park, CA · Nov 26, 2016#33
I had the G's pedal set sitting in my garage for the longest (like my other parts.) The problem I had here was I didn't have the Yaris to reference the JDM pedal angle, which is totally wrong for LHD vehicles. It bends to the right, while LHD pedals bend to the left. Go figure.

Picture not included in this copy


I was planning to hack the G's pedal and make it work. But as I was organizing the garage, I found a set of SRP Racing Pedals that I bought for my '91 MR2 10 years ago lol. I decided to test fit just the accel pedal cover and it pretty much fits the curvature of the pedal.

Picture not included in this copy

All bolted up. It's easier to reach for the pedal, but I think I'll still make an inch spacer to bring it up some. The brake/clutch pads also feel tons better than the squishy squeaky rubber pads.

Picture not included in this copy
NYC-SENYC · Nov 27, 2016#34
Do you have any issue with clearance for the gas pedal? I've been looking for a set of sport pedals for the 3rd gen cars and the shape of the gas pedal makes it a real problem. Pedals that fit the 2nd gen also fit the 3rd gen but the overlap on the gas pedal of the slanted part rubs up against the side of transmission tunnel and prevents the gas pedal from going all the way down. From the looks of your picture it seems like you would run into this problem.
NYC-SENYC · Nov 27, 2016#36
Good to know. Thanks.
enviriCT · Nov 27, 2016#37
oops read it too late, but yeah my fix was just going for razo pedals and it fixes the heel toe issue perfectly.
DabuuThread starterNo Bueno Park, CA · Dec 11, 2016#38
I was finally able to take the Yaris to the track yesterday.

Streets of Willow - Counter Clockwise

No cool action shots this time around, but I do have a boring video of one lap.

Track prep, I changed the both engine and trans oil at 1000 miles. Good ol' 5w-30 Synpower, MT90, and of course the trusty Toyota oil filter.

Picture not included in this copy


Hanging out with my buddies:

Picture not included in this copy


I'm doing a good job of slowing everyone down

Picture not included in this copy


Not my fastest lap as my GoPro stopped recording, but I thought it was a fun one.

https://youtu.be/RC_hwZZER6w

My personal best with the all stock Yaris was a 1:41.2xx

Not bad for all season tires, and no power. 👍

The car definitely needs suspension and tires. Under hard braking the front end dives alot causing the rear end to wobble. Good thing I have the items needed stowed away in the garage.

In the mean time, I finally installed the Tanabe exhaust, TRD rear sway bar, and the TRD drop in. Confirmed the exhaust fits '15+ models, since they don't have the rear lip spoiler w/ exhaust cut out. The rear end looks so much better with an exhaust top exiting out in the proper location.

Picture not included in this copy
justanotherdrunkSilicon Valley · Dec 13, 2016#39
very cool
Captain YarisSoFloYo · Dec 14, 2016#40
This is awesome! Looks and sounds great! Keep the updates coming.
tarkusYYZ · Dec 14, 2016#41
That car looks badass 😁

Sent from my LG G2 with CM13 using Tapatalk
DabuuThread starterNo Bueno Park, CA · Dec 14, 2016#42
Thanks guys!

You're hearing the rolla, if you're referring to the video, my car is so quiet lol. Tanabe exhaust does make it more audible, I love the tone. I didn't expect it to be this loud (totally happy that it wasn't as quiet as I expected!). I'll see if I can get some in car audio.

After putting a couple hundred miles after the install I wish I had the turd rear bar at the track, my car had so much body roll without it. The bar does make a difference. I can't wait to get back out to the track! but the car is probably going to be lowered by then. Also, during the rear bar installation, my car did not come equipped with the insulator (I was planning to toss it anyway) everyone talks about.

I finally ordered tires for the RPF1s, and I decided to go with some 195/50 Yokohama S.drives. Since she's mostly a daily, I didn't want to compromise colossal grip for tread life.
NYC-SENYC · Dec 14, 2016#43
Originally Posted by Dabuu ↑
Also, during the rear bar installation, my car did not come equipped with the insulator (I was planning to toss it anyway) everyone talks about.
It seems they were only used on the 2012-2014 SE models.

Oh, and sweet ride BTW.
DabuuThread starterNo Bueno Park, CA · Dec 23, 2016#44
Well, I confirmed my 15x7 +41 RPF1s do not clear the SE's bigger front brakes. :( Test fit with hand tightened lug nuts and the wheel does not move:

Picture not included in this copy

As you can see the spokes hit the caliper, but that's not all. The RPF1's barrel tapers into the face and with the bigger calipers, there's no room for sticky weights in the inner barrel, they'll just shear right off if the wheels were spaced out to clear the spokes.


Barrel tapering in:

Picture not included in this copy

Bummer.



In brighter news, I installed the Bilsteins and RSR springs...


Picture not included in this copy



then it rained on me :P

Picture not included in this copy



Perfect low down function and style for a daily driver.

Picture not included in this copy

I was able to only achieve -0.7 front camber with SPC bolts. I think I'll order the 3 dot Toyota Crash Bolts. I want -2.5 camber up front.



Met up with some friends, and one of them brought over his 15x8 +36 6ULs, and they clear the front calipers! That clearance!

Picture not included in this copy

I love the wheel gap with the 6ULs (225/45). Sucks the RPF1s (195/50) don't fit, the overall diameter is just .1" taller (22.6" vs 22.7"). Now to figure out what wheels to go with for the time being.
justanotherdrunkSilicon Valley · Dec 23, 2016#45
looks good

👍
Captain YarisSoFloYo · Dec 24, 2016#46
Looks great! How easy is it to install coilovers? I have very basic mechanical abilities but I'd love to learn. The thing that kinda freaks me out is the springs.
DabuuThread starterNo Bueno Park, CA · Dec 28, 2016#47
Springs always freak me out. I used a Craftsman Strut Spring compressor, its about $50, I got tired of renting it. You just need to compress the spring enough to remove any tension before loosening the nut holding the spring/bearing mount in place. The suspension is the same as the 2nd gens, so find a diy on here and it'll give you the jist. :)

Coilovers are by far easier to install than springs and struts because they come fully assembled making it an R&R job...well, on other vehicles. I think the Yaris coilovers still need some disassembly because you need to reuse the upper bearing, mounts, etc.

In my opinion, the Yaris' front strut set up is more difficult to take apart only because you have to use an allen on the strut to hold the shaft in place while you loosen/tighten the nut. It would suck if that allen gets rounded off, at least the torque isn't that high.

I wish it was a top strut mount with 3 studs instead of one shaft and 2 nuts sandwiching the assembly between the chassis.
DabuuThread starterNo Bueno Park, CA · Jan 3, 2017#48
Well, since the RPF1's didn't fit, I went with Plan B. It's about 4lbs heavier than the RPF1s, mainly due to width, but damn do they look good, and most importantly, all that caliper clearance!

15x8 +35 Gramlight 57DR in Magnesium Blue. Wrapped in 205/50R15 Yokohama S.drives.


Picture not included in this copy

Picture not included in this copy

This set up does poke, I'll get some side shots in the morning. I'm running -0.7 degrees of camber up front, definitely will need more, but I hope I don't rub at my current ride height. We'll find out next track day lol.

👍 I love the Grey and Mag Blue combo.
Captain YarisSoFloYo · Jan 4, 2017#49
Wow! That looks great! 👍
MugenRepCentral Pennsylvania · Jan 4, 2017#50
Awesome build! Love this setup!