Yarisworld Archive

Help! Cold Air Intake

11 posts · 5,578 views

frederickLE2013Original postGlen Bernie MD · May 29, 2016#1
Hello, I'm new to the forum and car modifications and was looking for some guidance on my 2013 Toyota Yaris Le. I've been looking for cold air intakes and I can't seem to find any of my year only from 2007 - 2011 just wondering if I could put any of those on my car or if you know any other things to give me some help. Thank you.

Replies 10

SirDigbyDenver, Colorado · May 30, 2016#2
it's the same engine bay. you should be fine with anything 06+
KalispelArizona (USA) · May 30, 2016#3
The hood clearance is a bit different on the 3rd Gen, so I hear it can be a tighter fit using some of the 2nd Gen cold-air-intakes.
frederickLE2013Thread starterGlen Bernie MD · May 30, 2016#4
So I should be okay with any of the intakes that are made for 06s and up, just might be a little tight. I have around 300$ for the intake, any brands better then another or is any intake fine?Like I said, I'm a rookie to this, dont want to buy just anything to find out it's shit, ya know. Thanks again guys.
DabuuNo Bueno Park, CA · May 31, 2016#5
For $300 bucks, I'd rather get a drop in air filter (K&N, TRD, aFe) and the rear TRD sway bar. You'll feel more performance through the corners than acceleration from the cold air intake.
rabbitoThailand · Jun 11, 2016#6
Originally Posted by frederickLE2013 ↑
Hello, I'm new to the forum and car modifications and was looking for some guidance on my 2013 Toyota Yaris Le. I've been looking for cold air intakes and I can't seem to find any of my year only from 2007 - 2011 just wondering if I could put any of those on my car or if you know any other things to give me some help. Thank you.
putting +06yr. will be fine..your going to lose low end tq and gain high end..i actually sold my intake and changed to k&n drop in..
honestly for the money, you rather go for a header...

Sent from my SM-J700F using Tapatalk
SirDigbyDenver, Colorado · Jun 13, 2016#7
I have an Injen. I think I paid like 103 or something from carID. it works well and can easily be modified for future modifications. (I have already done some)
the rear sway bar is also a great idea! the trd is cool, (19mm) I got the whiteline 23mm off carID for like 125 only because it looks so industrial and it's so huge!
the best mod is the 1zzFe throttle body swap! (imo) it's super easy and completely raises the fun level 10x!
tarkusYYZ · Jun 13, 2016#8
Originally Posted by Dabuu ↑
For $300 bucks, I'd rather get a drop in air filter (K&N, TRD, aFe)....
I had a K&N filter in a previous car, but never liked the fact that it needed re-oiling, along with the risk of getting oil deposits on the throttle and MAF sensor.

I hadn't heard of AFE before, so looked on their web site, and found they have a non-oil version! So I'm planning to put in one of those, as well as hack one side off the airbox, to open up more flow while keeping the engine bay looking fairly stock. ;-)

Sent from my LG-D801 using Tapatalk
DabuuNo Bueno Park, CA · Jun 14, 2016#9
Originally Posted by tarkus ↑
while keeping the engine bay looking fairly stock. ;-)
That's what I'm talking about!
tarkusYYZ · Jun 14, 2016#10
Yeah, don't want insurance kicking up a fuss about performance modifications.

Sent from my LG-D801 using Tapatalk
SirDigbyDenver, Colorado · Jun 24, 2016#11
Originally Posted by tarkus ↑
Yeah, don't want insurance kicking up a fuss about performance modifications.
what kind of insurance is that? your company inspects the vehicle?
that sounds terrible!