Yarisworld Archive

The Autopower 4pt roll bar...in the 2zrVios...project

20 posts · 16,126 views

ArmstrongRacingOriginal postSan Diego · May 26, 2016#1
I know it is no big deal for a Autopower roll bar to be installed in a Yaris by now, but how about a sedan...

I got this used roll bar from miniTRD's old Yaris LB, and my plan is to figure out the necessary modifications to weld it into my sedan with a harness bar the proper way...and possibly add other supporting bars.

1 attachment not included in this copy

Replies 19

ArmstrongRacingThread starterSan Diego · Jun 2, 2016#2
Update: I talked to Autopower today about sourcing additional bars for these "street" Yaris roll bars. The roll bar I have is for the Yaris LB and it does have a serial number on the base(61461) but Autopower only made a few of these, and they haven't made any in a while. They do keep cross-bars and harness-bars in stock though, that makes my conversion to a "race" roll bar easy. For those interested, the Autopower main hoop is 11ft 1inch long. 1.750 x .120 DOM

Next step, strip out the interior.
brushforhireJohnstown, PA · Jun 2, 2016#3
This is fantastic. Totally excited to see how this turns out.
justjesusOrange County · Jun 7, 2016#4
Originally Posted by ArmstrongRacing ↑
For those interested, the Autopower main hoop is 11ft 1inch long. 1.750 x .120 DOM
and also for those interested, I have a new one, still wrapped the way it came from Autopower (by way of MI). Installing it would essentially make my 60/40 split seat useless. Either it stays down, or stays up. At least, that's what it seems like.

If not, whatever. I may decide to take it racing again down the line 🤷
ArmstrongRacingThread starterSan Diego · Jun 16, 2016#5
Tomorrow is the last day of daily driving for the 2zrVios, it will get put on stands and stripped down to bare essentials in the days following

1 attachment not included in this copy

ern-dizCA all day · Jun 16, 2016#6
Why? Rebuilding some systems, or?
Bluevitz-rsOshawa, Ontario, Canada · Jun 16, 2016#7
MT swap now?
CrankyOldManWest Michigan · Jun 16, 2016#8
Originally Posted by Bluevitz-rs ↑
MT swap now?
Shhh! It's top secret! 😁
Bluevitz-rsOshawa, Ontario, Canada · Jun 16, 2016#9
🍻
Originally Posted by CrankyOldMan ↑
Shhh! It's top secret! 😁
ArmstrongRacingThread starterSan Diego · Jun 16, 2016#10
MT swap, weight reduction, cage.
ArmstrongRacingThread starterSan Diego · Jun 18, 2016#11
We made some good progress today on the 2zrVios. Stripped out the entire interior, removed the dash to remove the HVAC assembly and all of the airbag components, then reinstalled the upper dash pad and front seats so we can drive it over to Autopower for roll bar work.

1 attachment not included in this copy

fnkngrvIn The Hotbox · Jun 21, 2016#12
Busy day

Sent from m-o-b-i-l-e
ArmstrongRacingThread starterSan Diego · Jun 30, 2016#13
A little update, I removed the a/c compressor and remaining lines from the 2zr. I just need to go to an auto parts store and get a random belt to fit.

1 attachment not included in this copy

CrankyOldManWest Michigan · Jul 1, 2016#14
So you're going to run F mod in solo? What about club racing?

Sent from my MotoG3 using Tapatalk
ArmstrongRacingThread starterSan Diego · Jul 1, 2016#15
The main goal is to run all NASA HPDE next year, solo is not the priority any longer ��
brushforhireJohnstown, PA · Jul 1, 2016#16
Originally Posted by ArmstrongRacing ↑
A little update, I removed the a/c compressor and remaining lines from the 2zr. I just need to go to an auto parts store and get a random belt to fit.
I was just thinking about doing this, the only thing I wondered about was making sure the w/p was spinning, the location of the a/c compressor puts some extra pressure against the w/p.

Picture not included in this copy

VS

Picture not included in this copy

I guess, in theory, it should totally work. I am probably just over thinking it.

2 attachments not included in this copy

ArmstrongRacingThread starterSan Diego · Jul 1, 2016#17
All of the non-a/c Yaris 1nz's have the belt ran exactly like the bottom picture. See if you can find a picture of that diagram too.
brushforhireJohnstown, PA · Jul 1, 2016#18
Gotcha. Ugh, I'm itchin' to get back to workin on mine!
ArmstrongRacingThread starterSan Diego · Jul 3, 2016#19
This is the belt I used, just ask the auto parts stores for a 2013 Corolla non-a/c belt...

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Apr 28, 2017#20
Originally Posted by ArmstrongRacing ↑
This is the belt I used, just ask the auto parts stores for a 2013 Corolla non-a/c belt...
Ok guys, I got the bar installed.its a tight fit in the sedan and actually contacts the roof . I just gotta get Autopower to weld in the harness and diagonal bars, the paint itPicture not included in this copyPicture not included in this copy

Sent from my SM-G955U using Tapatalk