rabbitoOriginal postThailand · May 21, 2016#1T.B polishing is really popular here, $50 for full polishing inside the T.B..i do not know about the hp gain but i want to know if anyone tried this 😃😃😃😃
Picture not included in this copy
Sent from my SM-J700F using Tapatalk
Replies 8
fnkngrvIn The Hotbox · May 21, 2016#2There would be no power gains really. The only possible benefit that I could fathom is maybe slightly quicker butterfly actuation.
Sent from m-o-b-i-l-e
NJP440Ohio · May 22, 2016#3I just picked up a 1zz throttle body for my Yaris. That's the only real throttle body gain I've heard of for these cars so far.
Sent from my SM-G920T using Tapatalk
brushforhireJohnstown, PA · May 22, 2016#4From what I was reading up on, there can be some benefits to polishing the throttlebody, but usually when porting it a bit also. It had to do with removing any imperfections and opening the entrance a bit. Mostly trying to just remove the step as the air enters the TB.
That being said, even doing that on a factory setup probably won't net any benefit, with an intake and exhaust possibly, with an all out build I would imagine that it would help squeeze any hidden potential out of it.
rabbitoThread starterThailand · May 22, 2016#5 Originally Posted by
NJP440 ↑ I just picked up a 1zz throttle body for my Yaris. That's the only real throttle body gain I've heard of for these cars so far.
Sent from my SM-G920T using Tapatalk
yeah but 1zz TB must use intake kit...theres like no point if you dont use intake...im not trying to use intake kit(which i did before and lost low end)...
Sent from my SM-J700F using Tapatalk
RigaudRigaud, Quebec, Can. · May 23, 2016#6 Originally Posted by
rabbito ↑ yeah but 1zz TB must use intake kit...theres like no point if you dont use intake...im not trying to use intake kit(which i did before and lost low end)...
Sent from my SM-J700F using Tapatalk
Then you did something wrong because low end is greatly improved with the 1ZZ TB.
rabbitoThread starterThailand · May 23, 2016#7 Originally Posted by
Rigaud ↑ Then you did something wrong because low end is greatly improved with the 1ZZ TB.
im talking about having intake kit..not having 1zz tb..
Picture not included in this copy Sent from my SM-J700F using Tapatalk
Anchors15Austin, tx · May 23, 2016#8Does anyone know is a 1ZZ swap will work for a 3rd gen Yaris? (2015 3 door)
SirDigbyDenver, Colorado · May 30, 2016#9 Originally Posted by
Anchors15 ↑ Does anyone know is a 1ZZ swap will work for a 3rd gen Yaris? (2015 3 door)
if you swap the chip you should have no issues!