Yarisworld Archive

Another Toyota YUTV (Yaris Utility Vehicle)

9 posts · 5,314 views

wildcardOriginal postMissouri · Apr 11, 2016#1
I blame CTScott for this -

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 8

CTScottUSA, CT · Apr 11, 2016#2
Awesome! Is that yours?
wildcardThread starterMissouri · Apr 11, 2016#3
Originally Posted by CTScott ↑
Awesome! Is that yours?
Yep, just about got her finished. 2008 with 27" tractor tires on 14" steel rims, 2.5 lift in the rear, 2" spacers on the front wheels. Totally stock otherwise (besides the custom weight reduction).

Need to do a little more "massaging" of the inner fender wells on the front cause i'm still getting a tiny bit of rub at full articulation when the wheel is cranked and I also need to figure out how to rig up a hitch to pull our farm trailer and the brush mower.

😁
WeeYariGeorgetown, Ontario, Canada · Apr 11, 2016#4
2x6 bumper. Classic. 👍
wildcardThread starterMissouri · Apr 11, 2016#5
Originally Posted by WeeYari ↑
2x6 bumper. Classic. 👍
Thanks 🙂 I sometimes need to "nudge" equipment around and wanted something of a classic touch to the front end.
CTScottUSA, CT · Apr 11, 2016#6
Originally Posted by wildcard ↑
Yep, just about got her finished. 2008 with 27" tractor tires on 14" steel rims, 2.5 lift in the rear, 2" spacers on the front wheels. Totally stock otherwise (besides the custom weight reduction).

Need to do a little more "massaging" of the inner fender wells on the front cause i'm still getting a tiny bit of rub at full articulation when the wheel is cranked and I also need to figure out how to rig up a hitch to pull our farm trailer and the brush mower.

😁
Nice! For the hitch you can either copy the hidden hitch style one (which mounts to the two tie down tabs) or simply weld or bolt a receiver to the bottom of the rear bumper. I welded one and it works great.
ern-dizCA all day · Apr 11, 2016#7
I always get a kick out of stuff like this. 🙌
wildcardThread starterMissouri · Apr 11, 2016#8
Originally Posted by CTScott ↑
Nice! For the hitch you can either copy the hidden hitch style one (which mounts to the two tie down tabs) or simply weld or bolt a receiver to the bottom of the rear bumper. I welded one and it works great.
I'm tempted to get a little 110 flux wire welder as i've been wanting one for years and might go the weld on route. Metal work/fabrication isn't really much of an option for me since i don't have access to metal other than what can be picked up at lowes or home depot nor do i have the tools available. Welding on a cheap harbor freight hitch is looking like the easiest/best option.


Originally Posted by ern-diz ↑
I always get a kick out of stuff like this. 🙌
Thanks ! It was alot of fun to build and it will be so nice this summer to be kicking back with the AC and stereo on sipping on a cool drink while mowing the back acreage 👍
bairjoApr 11, 2016#9
Boy as soon as I saw this thread I knew it would give CTScott a rise.....very nice!