Yarisworld Archive

All New Yaris Latino America Cruise Control

21 posts · 14,788 views

Javier_viosOriginal postChile · Apr 7, 2016#1
Hello,

Anybody can helpme to understand the wiring of this model?? This is a drive by wire 1nz fe, also know as Third generation Vios.

http://s2.paultan.org/image/2015/01/...0717440659.jpg

My guest is pin 40 of conector A21 as always.

Best Regards
Javier

Replies 20

Javier_viosThread starterChile · Apr 8, 2016#2
This car is being sell in Latino America as a Toyota Yaris
CTScottUSA, CT · Apr 8, 2016#3
From what I have read about the 3rd gen Vios cruise control is not even an option, which likely means that the ECM is not programmed for it.

You can check the steering column connector for presence of the wires for it and if they are present, then perhaps it does.
Javier_viosThread starterChile · Apr 8, 2016#4
I know for fact that is not just de cruise control switch because I try the just switch and didn`t work. I did not check the spiral wiring to the DL3 conector and didn`t check the wiring from the DL3 conector to the ECU (pin 40).

If were a programing problem... Is there any solution? Or I need to go with an aftermarket cruise control ??

Best Regards
Javier
CTScottUSA, CT · Apr 8, 2016#5
Originally Posted by Javier_vios ↑
I know for fact that is not just de cruise control switch because I try the just switch and didn`t work. I did not check the spiral wiring to the DL3 conector and didn`t check the wiring from the DL3 conector to the ECU (pin 40).

If were a programing problem... Is there any solution? Or I need to go with an aftermarket cruise control ??

Best Regards
Javier
I don't have the wiring diagrams for the Vios, so I can't tell for sure. Does the ECM look like the 06-11 ones (which have the connector with the pin 40 shown in the DIY) or does the ECM look different than that?
Javier_viosThread starterChile · Apr 9, 2016#6
I just have the model, later I´m gonna try to remove the "bag" to see the ecu.
I still can`t figure out how to remove it
Ecu_Toyota_yaris_2014.jpg
CTScottUSA, CT · Apr 9, 2016#7
That's the AC ECU.
Javier_viosThread starterChile · Apr 20, 2016#8
CTScott,

Here is the Engine Control unit, is not the shape that i did hope.

Best regards
Javier
Ecu_3.JPGEcu_2.JPG
Javier_viosThread starterChile · May 4, 2016#9
Anyboby any help ???
CTScottUSA, CT · May 4, 2016#10
As I said above, cruise control is not available on the 3rd gen Vios.
Javier_viosThread starterChile · May 4, 2016#11
Ok, thanks ...
jcboyAsia · May 4, 2016#12
surprised to see your ecm is made in the philippines. probably in the Sta Rosa Laguna plant. well i wouldnt be surprised one bit that Scott is right, for one, he is right 99% of the time, and two, Vioses in the Philippines don't have cruise control even as an option.
Javier_viosThread starterChile · May 5, 2016#13
Hello,

I see that cruise control is not even an optional in Vios/Yaris, but the steering wheel came with a cover to remove for a cruise control switch, that`s why I belived that is was posible conecting the ecm in the correct pin...

If is not posibile just conecting the switch to ecm, Is another solution ?? A toyota module ??? An after market cruise control ?? Another ecm ??

Thank you both for your answers... by the way this yaris is made in Thailand.

Best Regards
Javier
CCS.png
CTScottUSA, CT · May 6, 2016#14
Originally Posted by Javier_vios ↑
Hello,

I see that cruise control is not even an optional in Vios/Yaris, but the steering wheel came with a cover to remove for a cruise control switch, that`s why I belived that is was posible conecting the ecm in the correct pin...

If is not posibile just conecting the switch to ecm, Is another solution ?? A toyota module ??? An after market cruise control ?? Another ecm ??

Thank you both for your answers... by the way this yaris is made in Thailand.

Best Regards
Javier
Toyota uses many of the same parts on cars, even if the feature is not present. Also, that cover is the only way to access the release tab for the airbag on that side of the steering wheel.
jcboyAsia · May 7, 2016#15
Originally Posted by Javier_vios ↑
Hello,

I see that cruise control is not even an optional in Vios/Yaris, but the steering wheel came with a cover to remove for a cruise control switch, that`s why I belived that is was posible conecting the ecm in the correct pin...

If is not posibile just conecting the switch to ecm, Is another solution ?? A toyota module ??? An after market cruise control ?? Another ecm ??

Thank you both for your answers... by the way this yaris is made in Thailand.

Best Regards
Javier
I've been dreaming and been envious of the Cruise Control discussion in this forum for a while now. Very useful especially when using Superhighways, where the stretch is at least 75km long but top speed is limited to 100km/h.

Cool, some of my Yaris parts are made in Thailand actually, i've seen Made in Japan too in some them (IIRC).

Originally Posted by CTScott ↑
Toyota uses many of the same parts on cars, even if the feature is not present. Also, that cover is the only way to access the release tab for the airbag on that side of the steering wheel.
This is our steering wheel and if this is the same, then Scott is correct, it's only an access door for the release tabs. (to remove SW)
Picture lost · www.toyotamiennam.com
Javier_viosThread starterChile · Jun 11, 2016#16
Hello,

This is my toyota steering wheel, I`m still hoping solution, I know that this ECM is not the one that have cruise control in pin 40 of conector 21, but the ECM of 4 row and 4 conector could have cruise control programing in pin 21 of the conector with 31 pins as in toyota hilux ...

Any comments ??

Best regards
Javier
10-Interior-Steering-Wheel-with-Audio-Switch-Controls-850x842.jpg
Javier_viosThread starterChile · Jun 12, 2016#17
I did try with 21 pin and 30 pin ... no luck yet.
CTScottUSA, CT · Jun 12, 2016#18
Originally Posted by Javier_vios ↑
I did try with 21 pin and 30 pin ... no luck yet.

You can try every pin on the ECM and still will have no luck. I am not sure what part of your ECM does not support cruise control you do not understand. Your only option will be an aftermarket cruise control kit.
laobovietnam · Aug 8, 2017#19
Originally Posted by Javier_vios ↑
CTScott,

Here is the Engine Control unit, is not the shape that i did hope.

Best regards
Javier
I think you try pin 18 of top connecter which first top. Dear
amarabSaudi Arabia · Oct 12, 2019#20
hello
where is*pin 18 of top connecter
ElscienceTaiwan · Jan 17, 2024#21
Can you work at a fixed speed?